Author Topic: Oil leak  (Read 3178 times)

0 Members and 1 Guest are viewing this topic.

tyler

  • Guest
Oil leak
« on: May 24, 2015, 03:09:11 AM »
I have an oil leak on the left side of my 76 CB super sport. The oil is coming from the left rear crankcase bolt head. Any ideas other than pulling the crankcase apart would be great. I was thinking of a bead of hondabond around the bolt shank (before the threads!) where the crankcase clamshells together and let it set up for a day.

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,808
Re: Oil leak
« Reply #1 on: June 22, 2015, 11:28:01 AM »
Its more likely to be the gasket at the cover............with oil weeping over to the bolt before it 'drips' on your nice clean garage floor. Often the result of parking the bike on the side-stand for extended time periods. It won't hurt to check the cap-bolt. I've successfully installed a 'half-slice' of a grommet to stop more than one oil leak.
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Oil leak
« Reply #2 on: June 22, 2015, 11:29:57 AM »
Has the engine ever been apart before?
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,910
  • Bought her new 4/75
Re: Oil leak
« Reply #3 on: June 22, 2015, 11:42:04 AM »
+1 with Dennis.

Is it trailing down from the area of the dowel?

It could be from the crank shaft bolts as you mention but not likely unless the engine has been apart and sealant was not properly put around the mating surface around the bolt hole in the case halves. I just put cases together yesterday and in addition to placing sealant where I mentioned I also put some under the washer and nut (I replaced the 8mm bolts with studs and have to use nuts) as in your bolt picture with the oil drop.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)