« previous next »
Pages: [1]   Go Down

Author Topic: Rearsets CB550 F2 supersport  (Read 1128 times)

0 Members and 1 Guest are viewing this topic.

Offline kevinevo7

  • Full Member
  • *
  • Posts: 4
Rearsets CB550 F2 supersport
« on: May 29, 2015, 06:17:45 AM »
I'm looking for some rearsets that fit on an CB550 F2 supersport.
Are there some of the shelf sets that are bolt on?
Or do I have to make some adapters to make it fit.

Al examples and suggestions are welcome.
Logged

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: Rearsets CB550 F2 supersport
« Reply #1 on: May 29, 2015, 07:02:19 AM »
It's pretty easy to make bolt on adapters for after market rear-sets that secure with long engine mount bolts. With a bit more effort you can have adjustability too.
 



« Last Edit: May 29, 2015, 07:07:08 AM by FunJimmy »
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: Rearsets CB550 F2 supersport
« Reply #2 on: May 29, 2015, 07:07:37 AM »
You will need adaptors as there is no direct bolt on for your model.
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline CBGhia

  • Expert
  • ****
  • Posts: 1,347
Re: Rearsets CB550 F2 supersport
« Reply #3 on: May 29, 2015, 09:24:59 AM »
Quote from: FunJimmy on May 29, 2015, 07:02:19 AM
It's pretty easy to make bolt on adapters for after market rear-sets that secure with long engine mount bolts. With a bit more effort you can have adjustability too.
 





You don't happen to have patterns for those laying around do you?  How thick did you go with the aluminum?
Logged
CB550 Cafe, GL1000, Buell Ulysses
Quote from: dave500 on February 14, 2014, 03:53:33 AM
if you dont trial spin the camshaft in the head and cover you are a novice,with no natural mechanical appitude,destined for destruction.
"The cleaner the dipstick, the closer to God." -Rev. Horton Heat
“Faster, Faster, until the thrill of speed overcomes the fear of death.”  - Hunter S. Thompson

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: Rearsets CB550 F2 supersport
« Reply #4 on: May 29, 2015, 05:57:35 PM »
Quote from: CBGhia on May 29, 2015, 09:24:59 AM
You don't happen to have patterns for those laying around do you?  How thick did you go with the aluminum?

Not anymore but they're not difficult to make.
The plate was 10mm or 12mm thick.
I'll check and confirm.
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0
Pages: [1]   Go Up
« previous next »