Author Topic: Putting tank Logos back on?  (Read 4354 times)

0 Members and 1 Guest are viewing this topic.

Offline GizmoDuck

  • Enthusiast
  • **
  • Posts: 201
Putting tank Logos back on?
« on: May 31, 2015, 10:56:48 AM »
Any tips for putting the tank logos back on?  I have a 1973 CB350F.  The little tank inserts were rusted to pieces and fell apart once I got the logo removed.  Painting the tank then want to put the logo back on and not sure if I should file down the pins and use tape or if someone makes replacement inserts that the pins go into.   Same question for the side cover logos.

Offline Vinhead1957

  • Expert
  • ****
  • Posts: 1,196
Re: Putting tank Logos back on?
« Reply #1 on: June 02, 2015, 05:22:59 AM »
You can leave the pins on and cut a hole in body side moulding tape available at any auto parts store. The 3M tape is a clean install and doesn't interfere or chip paint. Use the pins to line the logos up and voila!

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,090
  • Sunny Central Florida
Re: Putting tank Logos back on?
« Reply #2 on: June 02, 2015, 06:53:01 AM »
The little clips are still available from Honda:

87311-634-600
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline GizmoDuck

  • Enthusiast
  • **
  • Posts: 201
Re: Putting tank Logos back on?
« Reply #3 on: June 02, 2015, 04:55:30 PM »
The little clips are still available from Honda:

87311-634-600

Where should I try to order those from?

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,281
  • Central Texas
Re: Putting tank Logos back on?
« Reply #4 on: June 02, 2015, 05:08:29 PM »
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline GizmoDuck

  • Enthusiast
  • **
  • Posts: 201
Re: Putting tank Logos back on?
« Reply #5 on: June 02, 2015, 05:12:07 PM »
The little clips are still available from Honda:

87311-634-600

Where should I try to order those from?

http://www.ebay.com/itm/NOS-HONDA-87311-634-600-NUT-EMBLEM-CLAMP-/191098830214

Thanks!  Where should I go looking for original part numbers so I don't have to bug people on the board about it anymore?

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,281
  • Central Texas
Re: Putting tank Logos back on?
« Reply #6 on: June 02, 2015, 06:26:47 PM »
The little clips are still available from Honda:

87311-634-600

Where should I try to order those from?

http://www.ebay.com/itm/NOS-HONDA-87311-634-600-NUT-EMBLEM-CLAMP-/191098830214

Thanks!  Where should I go looking for original part numbers so I don't have to bug people on the board about it anymore?


Here is one place...


http://www.westernhonda.com/fiche_select1.asp?cat=Motorcycles&mfg=Honda
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........