« previous next »
Pages: [1]   Go Down

Author Topic: CB550K Cylinder Head Cover Gasket - sealant or no?  (Read 752 times)

0 Members and 1 Guest are viewing this topic.

Offline jorwesflow

  • Hot Shot
  • ***
  • Posts: 258
  • we're not schizophrenic
CB550K Cylinder Head Cover Gasket - sealant or no?
« on: June 18, 2015, 10:16:55 PM »
CB550K 1977
I've found conflicting opinions on it. My Cylinder Head Cover gasket (AKA valve cover) has recently breached and it's time for a new one. Should I use some sort of gasket sealant/form-a-gasket in the groove before setting the gasket in? Auto Zone has a million different types: high temp, red, copper, non-hardening, etc and there's also many who swear by Hondabond, but which one?
« Last Edit: June 18, 2015, 10:21:12 PM by jorwesflow »
Logged
1977 CB550K

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,361
Re: Cylinder Head Cover Gasket - sealant or no?
« Reply #1 on: June 18, 2015, 10:19:22 PM »
I'm guessing this is a 550 bike since you mention groove on the cover....

Don't need any sealant
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline jorwesflow

  • Hot Shot
  • ***
  • Posts: 258
  • we're not schizophrenic
Re: CB550K Cylinder Head Cover Gasket - sealant or no?
« Reply #2 on: June 18, 2015, 10:22:04 PM »
Quote from: goldarrow on June 18, 2015, 10:19:22 PM
I'm guessing this is a 550 bike since you mention groove on the cover....

Don't need any sealant
Oops, Yes CB550k 1977. I updated the title.
Well I've heard OE gaskets don't but the Vesrah I purchased might?
Logged
1977 CB550K

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,361
Re: CB550K Cylinder Head Cover Gasket - sealant or no?
« Reply #3 on: June 18, 2015, 10:23:59 PM »
Don't need it still, but if for peace of mind, use hondabond sparingly. 
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline flatlander

  • Old Timer
  • ******
  • Posts: 2,605
Re: CB550K Cylinder Head Cover Gasket - sealant or no?
« Reply #4 on: June 19, 2015, 02:02:45 AM »
you mean that thing that's basically a big o-ring pushed into the groove along the cover, right?
it doesn't really need anything. if you find later that it leaks you can still remove it relatively easily (compared to the head at least) but then i'd look for the reason of the leak as there shouldn't be any if the surfaces and gasket are in good shape.
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,056
  • I refuse...
Re: CB550K Cylinder Head Cover Gasket - sealant or no?
« Reply #5 on: June 19, 2015, 05:34:28 AM »
Yes, the cover can come off easily, but then you have to adjust your valves again. Stock it didn't use any sealant. But, I've used a very thin coat of Hondabond (different brand) as insurance. 40 year old cast alloy is hard to expect to be perfect.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: CB550K Cylinder Head Cover Gasket - sealant or no?
« Reply #6 on: June 19, 2015, 06:20:21 AM »
Quote from: calj737 on June 19, 2015, 05:34:28 AM
Yes, the cover can come off easily, but then you have to adjust your valves again. Stock it didn't use any sealant. But, I've used a very thin coat of Hondabond (different brand) as insurance. 40 year old cast alloy is hard to expect to be perfect.


I used sealant when I put mine back together. I am around several hundred miles and not a drop of oil...... This time around!
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: CB550K Cylinder Head Cover Gasket - sealant or no?
« Reply #7 on: June 19, 2015, 08:44:19 AM »
I used sealant around the pucks but not the long o-ring gasket. If it's leaking for some reason make sure your crank vent tube isn't blocked or pinched and has air flow out of the crank case.
Logged
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)
Pages: [1]   Go Up
« previous next »