« previous next »
Pages: [1]   Go Down

Author Topic: 1971 CB500 Head Gasket - Best Current Choice?  (Read 478 times)

0 Members and 1 Guest are viewing this topic.

Offline Skowinski

  • Full Member
  • *
  • Posts: 56
1971 CB500 Head Gasket - Best Current Choice?
« on: July 10, 2015, 11:43:46 AM »
Searched but didn't find relevant current information - I have a gasket kit from David Silver Spares, which is fine for most gaskets/O-rings.  But, I want to put the best head gasket on that I can find, and suspect there is something better than what came in the kit.

Searched for OEM Honda, but doesn't seem they are out there any more.  Vesrah, same, can't seem to find one.  Looks like I can get a Cometic from Dynoman, any experience with those?  Or recommendations?

Thanks.
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: 1971 CB500 Head Gasket - Best Current Choice?
« Reply #1 on: July 10, 2015, 12:12:31 PM »
I have personally not used one, but I would have no worries with a Cometic from Dynoman.
Many here have used and recommend them.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Skowinski

  • Full Member
  • *
  • Posts: 56
Re: 1971 CB500 Head Gasket - Best Current Choice?
« Reply #2 on: July 11, 2015, 07:05:19 AM »
Thanks flybox.  Anyone used a cometic?  Looking like my best bet in the year 2015.
Logged
Pages: [1]   Go Up
« previous next »