« previous next »
Pages: [1]   Go Down

Author Topic: Front brake return pressure / 74 550  (Read 1007 times)

0 Members and 2 Guests are viewing this topic.

Offline mpgholston

  • Full Member
  • *
  • Posts: 31
Front brake return pressure / 74 550
« on: July 11, 2015, 09:08:00 AM »
Hey guys,

Trying to figure out the reason for my front brake binding. I've disconnected the caliper but still have the hose installed. I can get the piston to return as much as I want with a good bit of squeezing with two fingers from each hand. Does this seem about correct?  I'd like to think its the pad that won't return and would like to fix the issue by polishing its side walls and lubing it. Thanks for your thoughts.
Logged
All Stock and All Spec 1974 CB550.
In my book, you either screw a guy out of tires OR upload pictures of yourself playing with your crank on the web.  Performing both will render absolutely horrible results. #brimmer.

Offline jeremyillingworth

  • Full Member
  • *
  • Posts: 86
Re: Front brake return pressure / 74 550
« Reply #1 on: July 11, 2015, 09:11:32 AM »
Cleaning up the sides of the piston really helped with my brake when it was dragging.

jeremy
Logged

Offline mpgholston

  • Full Member
  • *
  • Posts: 31
Re: Front brake return pressure / 74 550
« Reply #2 on: July 11, 2015, 10:06:34 AM »
I should have mentioned I did remove the piston and polish it about 3months ago
Logged
All Stock and All Spec 1974 CB550.
In my book, you either screw a guy out of tires OR upload pictures of yourself playing with your crank on the web.  Performing both will render absolutely horrible results. #brimmer.

Offline mpgholston

  • Full Member
  • *
  • Posts: 31
Re: Front brake return pressure / 74 550
« Reply #3 on: July 11, 2015, 02:22:37 PM »
Yeah, I went ahead and pulled it. No drag after 5 miles. We'll see.
Logged
All Stock and All Spec 1974 CB550.
In my book, you either screw a guy out of tires OR upload pictures of yourself playing with your crank on the web.  Performing both will render absolutely horrible results. #brimmer.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,480
  • Central Texas
Re: Front brake return pressure / 74 550
« Reply #4 on: July 11, 2015, 04:04:05 PM »
Quote from: mpgholston on July 11, 2015, 10:06:34 AM
I should have mentioned I did remove the piston and polish it about 3months ago

Did you get the groove in the caliper spotless and install a new seal?
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline mpgholston

  • Full Member
  • *
  • Posts: 31
Re: Front brake return pressure / 74 550
« Reply #5 on: July 11, 2015, 04:37:51 PM »


Did you get the groove in the caliper spotless and install a new seal?
[/quote]

Groove, yes. Seal, no, but it is holding pressure.
Logged
All Stock and All Spec 1974 CB550.
In my book, you either screw a guy out of tires OR upload pictures of yourself playing with your crank on the web.  Performing both will render absolutely horrible results. #brimmer.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,480
  • Central Texas
Re: Front brake return pressure / 74 550
« Reply #6 on: July 11, 2015, 05:36:00 PM »
Quote from: mpgholston on July 11, 2015, 04:37:51 PM


Did you get the groove in the caliper spotless and install a new seal?

Groove, yes. Seal, no, but it is holding pressure.
[/quote]

When I am experiencing caliper issues, I make it a habit to install a new seal.  Only about 10 bucks....
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........
Pages: [1]   Go Up
« previous next »