« previous next »
Pages: [1] 2  All   Go Down

Author Topic: Anyone got an old Clymer CB750 manual?  (Read 4438 times)

0 Members and 3 Guests are viewing this topic.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Anyone got an old Clymer CB750 manual?
« on: October 24, 2006, 05:30:23 PM »
G'Day guys, well I sold my beautiful ARD magneto, (Sean, I'll be needing you to order me a Dyna 2000 soon............) and Jim French, the buyer, needs some installation instructions?

Now an Ebayer contacted me to say that the old Clymer manuals have "How to" set-up instructions in the "Performance" section of the manual? I've only got the genuine manual and a couple of Haynes manuals, so I was wondering if you guys could help?

I'm not sure if Jim is a SOHC4 member, but his email address is jmfmicroweld@earthlink.net if you can help him out? Thanks guys, Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,566
  • Big ideas....
Re: Anyone got an old Clymer CB750 manual?
« Reply #1 on: October 24, 2006, 06:00:47 PM »
Quote from: Terry in Australia on October 24, 2006, 05:30:23 PM
G'Day guys, well I sold my beautiful ARD magneto, (Sean, I'll be needing you to order me a Dyna 2000 soon............) and Jim French, the buyer, needs some installation instructions?

Now an Ebayer contacted me to say that the old Clymer manuals have "How to" set-up instructions in the "Performance" section of the manual? I've only got the genuine manual and a couple of Haynes manuals, so I was wondering if you guys could help?

I'm not sure if Jim is a SOHC4 member, but his email address is jmfmicroweld@earthlink.net if you can help him out? Thanks guys, Cheers, Terry. ;D
Oh,  I have a real old one..... ;)
Logged
Owner of the "Million Dollar CB"

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: Anyone got an old Clymer CB750 manual?
« Reply #2 on: October 24, 2006, 07:17:16 PM »
Quote from: MRieck on October 24, 2006, 06:00:47 PM
Oh,  I have a real old one..... ;)

I've heard about your "real old one" Mike, ha ha! Do you have the article? Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,566
  • Big ideas....
Re: Anyone got an old Clymer CB750 manual?
« Reply #3 on: October 24, 2006, 07:30:42 PM »
Quote from: Terry in Australia on October 24, 2006, 07:17:16 PM
Quote from: MRieck on October 24, 2006, 06:00:47 PM
Oh,  I have a real old one..... ;)

I've heard about your "real old one" Mike, ha ha! Do you have the article? Cheers, Terry. ;D
I think I do sir....I'll check tomorrow.
Logged
Owner of the "Million Dollar CB"

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: Anyone got an old Clymer CB750 manual?
« Reply #4 on: October 24, 2006, 07:32:45 PM »
Quote from: MRieck on October 24, 2006, 07:30:42 PM
Quote from: Terry in Australia on October 24, 2006, 07:17:16 PM
Quote from: MRieck on October 24, 2006, 06:00:47 PM
Oh,  I have a real old one..... ;)

I've heard about your "real old one" Mike, ha ha! Do you have the article? Cheers, Terry. ;D
I think I do sir....I'll check tomorrow.

Thanks mate! ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Anyone got an old Clymer CB750 manual?
« Reply #5 on: October 24, 2006, 07:36:04 PM »
I will get Chris to chech his as well.

Sam.
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: Anyone got an old Clymer CB750 manual?
« Reply #6 on: October 24, 2006, 08:01:13 PM »
Quote from: samcr750 on October 24, 2006, 07:36:04 PM
I will get Chris to chech his as well.

Sam.

Thanks sammy, for a moment there I thought you were gonna tell me that you have "a real old one" too! Ha ha, Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Anyone got an old Clymer CB750 manual?
« Reply #7 on: October 24, 2006, 08:05:36 PM »
Think I might change my mind about asking Chris to look  ::) ::) ::) ::) ::)

Sam ;D
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: Anyone got an old Clymer CB750 manual?
« Reply #8 on: October 24, 2006, 08:49:36 PM »
Quote from: samcr750 on October 24, 2006, 08:05:36 PM
Think I might change my mind about asking Chris to look  ::) ::) ::) ::) ::)

Sam ;D

C'mon maaaate, don't be such a touchy old git! ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Anyone got an old Clymer CB750 manual?
« Reply #9 on: October 24, 2006, 08:52:05 PM »
 ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Jv550

  • Enthusiast
  • **
  • Posts: 154
  • '75 CB 550 K
Re: Anyone got an old Clymer CB750 manual?
« Reply #10 on: October 24, 2006, 10:48:10 PM »
I've got a clymer that covers 750s for 1969-74. There's no performance section... :( I've been looking to trade for a 550 manual - I've got a 450 manual too if anyone's interested.
Logged
That's like hypnotizing chickens...

Steelo

  • Guest
Re: Anyone got an old Clymer CB750 manual?
« Reply #11 on: October 25, 2006, 03:20:26 AM »
Terry I've got a Clymer with performance section buuuuuuuuuuuuuuut all it says is, " ARD Magneto - This system is one of the first to be introduced, still a favourite. However the magneto uses conventional points, which need periodic readjustment. The cost of the ARD is very high. This is an excellent first generation performance ignition for the Honda Four - but better systems are now available"
This is followed by a warning about not using "mysterious" ignition systems 
Thats from the 1983 Eighth Edition.

Now as for old ones us Aussies have found that liberal coverings of Vegemite keep ours young firm and proud! And thats just our women.

I read the other day the Yanks have banned vegemite as it has folate in it. So much for their superior intellect making them the "Masters of the Universe" Fancy depriving their population of the ELIXER OF YOUTH!!!!

This website may be useful - I haven't checked data but you may know  http://britishcyclesupply.com/help.htm
« Last Edit: October 25, 2006, 03:25:35 AM by Steelo »
Logged

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: Anyone got an old Clymer CB750 manual?
« Reply #12 on: October 25, 2006, 03:57:22 AM »
Thanks mate, I guess a pre-1983 Clymer might be the go! Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

steveko

  • Guest
Re: Anyone got an old Clymer CB750 manual?
« Reply #13 on: October 25, 2006, 05:07:00 AM »
Terry I have a 1972 Edition of Clymer Service,Repair,Handbook  1969 to 1972  had a quick look and can't see a performance section.
steve
Logged

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: Anyone got an old Clymer CB750 manual?
« Reply #14 on: October 25, 2006, 08:19:27 AM »
IIRC the ARD mags and Joe Hunt Mags are pretty much the same. You can contact Joe Hunt and they will tell you how to set it up.

http://www.huntmagnetos.com/

I think they ever offer rebuilding services.
Logged
Maintenance Matters Most

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: Anyone got an old Clymer CB750 manual?
« Reply #15 on: October 25, 2006, 01:11:18 PM »
Hey Terry
Jim French here and I just became a new member of this organization yesterday and I should have done this a long time ago
but just thanks again for putting the word out. If any one has an old manual that has that ARD info in it I would love to have it
Samcr750 left very good instructions on how to time this system so I think I am OK
thanks again
Jim
Logged
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,566
  • Big ideas....
Re: Anyone got an old Clymer CB750 manual?
« Reply #16 on: October 25, 2006, 01:35:34 PM »
Quote from: big-jim on October 25, 2006, 01:11:18 PM
Hey Terry
Jim French here and I just became a new member of this organization yesterday and I should have done this a long time ago
but just thanks again for putting the word out. If any one has an old manual that has that ARD info in it I would love to have it
Samcr750 left very good instructions on how to time this system so I think I am OK
thanks again
Jim
The instructions Sam left in the Open Forum are out of the old Clymers.
Logged
Owner of the "Million Dollar CB"

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: Anyone got an old Clymer CB750 manual?
« Reply #17 on: October 27, 2006, 02:26:17 AM »
Quote from: big-jim on October 25, 2006, 01:11:18 PM
Hey Terry
Jim French here and I just became a new member of this organization yesterday and I should have done this a long time ago
but just thanks again for putting the word out. If any one has an old manual that has that ARD info in it I would love to have it
Samcr750 left very good instructions on how to time this system so I think I am OK
thanks again
Jim

No worries Jim, i just won an auction for 2 more ARD magneto's (different models from the one I sold you) so I better read those instructions too! Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,488
Re: Anyone got an old Clymer CB750 manual?
« Reply #18 on: October 27, 2006, 04:38:33 AM »
Quote from: Terry in Australia on October 27, 2006, 02:26:17 AM
Quote from: big-jim on October 25, 2006, 01:11:18 PM
Hey Terry
Jim French here and I just became a new member of this organization yesterday and I should have done this a long time ago
but just thanks again for putting the word out. If any one has an old manual that has that ARD info in it I would love to have it
Samcr750 left very good instructions on how to time this system so I think I am OK
thanks again
Jim

No worries Jim, i just won an auction for 2 more ARD magneto's (different models from the one I sold you) so I better read those instructions too! Cheers, Terry. ;D
shut up,im tired of hearing about your magneto scores. ;D
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,321
  • So, what do ya wanna talk about today?
Re: Anyone got an old Clymer CB750 manual?
« Reply #19 on: October 27, 2006, 02:21:16 PM »
Hey Dusty, is that a fat boy in the pic? ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: Anyone got an old Clymer CB750 manual?
« Reply #20 on: October 27, 2006, 09:58:00 PM »
Quote from: Terry in Australia on October 27, 2006, 02:21:16 PM
Hey Dusty, is that a fat boy in the pic? ;D

Looks a little to big to be calling him a Fat Boy   ;D

Nice score on the mags. I'll check with the guy next door. He has a 750 manual.

Welcome Bid-Jim.

Paul
Logged
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Anyone got an old Clymer CB750 manual?
« Reply #21 on: January 11, 2007, 10:47:11 PM »
Bump
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline burmashave

  • Forum Immoderator
  • Old Timer
  • ******
  • Posts: 2,876
    • burmashave.net
Re: Anyone got an old Clymer CB750 manual?
« Reply #22 on: January 11, 2007, 11:21:12 PM »
Sam, do you need a Clymer's?   I just realized I have an extra Clymer's because my PO gave me one with the bike.  I dunno what exactly constitutes old, but both were published in 1980.  Anyway, I'll pop it in the mail (free) to whomever axes first.  If no one axes, I'll post it to the parts for sale.
Logged
Quote from: SOHC Digger, RIP
'Ere's whatcha do, Guvna', just throw a couple dookie logs in the hearth and bob's your uncle!
'77 CB750k

Offline Sam Green Racing

  • Really Old Timer ...
  • *******
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Anyone got an old Clymer CB750 manual?
« Reply #23 on: January 11, 2007, 11:30:11 PM »
NO thanks, I just bumped the thread up for Big Jim, he PMed me for more info that I don't have regards setting up of a ARD magneto.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline burmashave

  • Forum Immoderator
  • Old Timer
  • ******
  • Posts: 2,876
    • burmashave.net
Re: Anyone got an old Clymer CB750 manual?
« Reply #24 on: January 11, 2007, 11:41:19 PM »
K.
Logged
Quote from: SOHC Digger, RIP
'Ere's whatcha do, Guvna', just throw a couple dookie logs in the hearth and bob's your uncle!
'77 CB750k
Pages: [1] 2  All   Go Up
« previous next »