Author Topic: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine (Read 127128 times)

MessnerMoto · « **Reply #100 on:** August 12, 2015, 09:24:12 AM »

Yep that looks really good.

Retro Rocket · « **Reply #101 on:** August 12, 2015, 03:06:49 PM »

Quote from: CB750 Cafe Racer Fan on August 12, 2015, 08:38:35 AM

For those interested in shaving some weight on their CB750F bikes, EBC make a pro-lite rotor that fits all 1975-78 CB750F models - Part No. MD1064 (http://www.dynoman.net/brakes/ebc-apps.html). I found one for $120.

Thanks Don, I've got 3 disc brake F0/F1 rear hubs and need 2 discs {better discs} , where did you find them for $120... they are over $200 in that link...

SOHC4 Cafe Racer Fan · « **Reply #102 on:** August 12, 2015, 03:44:37 PM »

I found it listed by an Amazon seller for $120. I think it was a one-item only sale. Basically, I got lucky. I checked the link that said other seller's selling for $______/

Another seller was also listing them for $148 shipped: http://www.amazon.com/gp/product/B000WNZ4EW?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It now looks like the second seller increased the price to $178 shipped. I see that there's another vendor (Lion Parts) selling them for $168 shipped, too.

I'm not super savvy how Amazon works, but I think almost anyone can use it as a selling portal, to sell one item or a certain amount (inventory).

Retro Rocket · « **Reply #103 on:** August 12, 2015, 04:34:35 PM »

Quote from: CB750 Cafe Racer Fan on August 12, 2015, 03:44:37 PM

I found it listed by an Amazon seller for $120. I think it was a one-item only sale. Basically, I got lucky. I checked the link that said other seller's selling for $______/

Another seller was also listing them for $148 shipped: http://www.amazon.com/gp/product/B000WNZ4EW?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It now looks like the second seller increased the price to $178 shipped. I see that there's another vendor (Lion Parts) selling them for $168 shipped, too.

I'm not super savvy how Amazon works, but I think almost anyone can use it as a selling portal, to sell one item or a certain amount (inventory).

Thanks Bud, I was only looking for EBC discs last night...

SOHC4 Cafe Racer Fan · « **Reply #104 on:** August 12, 2015, 04:44:55 PM »

Quote from: Retro Rocket on August 12, 2015, 04:34:35 PM

Quote from: CB750 Cafe Racer Fan on August 12, 2015, 03:44:37 PM
I found it listed by an Amazon seller for $120. I think it was a one-item only sale. Basically, I got lucky. I checked the link that said other seller's selling for $______/

Another seller was also listing them for $148 shipped: http://www.amazon.com/gp/product/B000WNZ4EW?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It now looks like the second seller increased the price to $178 shipped. I see that there's another vendor (Lion Parts) selling them for $168 shipped, too.

I'm not super savvy how Amazon works, but I think almost anyone can use it as a selling portal, to sell one item or a certain amount (inventory).

Thanks Bud, I was only looking for EBC discs last night...

I found that one on Friday. I haven't seen one as low since.

Trad · « **Reply #105 on:** August 12, 2015, 05:49:22 PM »

Don, I just read this whole thread. It looks like you've had quite a few battles with this one. haha. Like all the builds you've done; I can't wait to see the finished product, I know it will be amazing.

SOHC4 Cafe Racer Fan · « **Reply #106 on:** August 12, 2015, 09:00:34 PM »

Quote from: Trad on August 12, 2015, 05:49:22 PM

Don, I just read this whole thread. It looks like you've had quite a few battles with this one. haha. Like all the builds you've done; I can't wait to see the finished product, I know it will be amazing.

Thanks, Jared. High praise coming from you. I hope you are enjoying your Rust and Bones ride this Summer.

I just started sourcing parts for the rear wheel. New bearings, cush drive rubbers and brake caliper pads in anticipation of getting a CB750F hub.

Like Hannibal used to say . . .

2785580d9024017d8f101ae9cfa692bc_zpsr7lnjqbh by Donald Leonhardt, on Flickr

calj737 · « **Reply #107 on:** August 13, 2015, 04:56:40 AM »

Are you planning on a stock 750F caliper and MC? I hear rumors that they're not plentiful and those that you do find need a rebuild. Do keep me posted. If you find 1, find 2 and send it along to me for Springers build

SOHC4 Cafe Racer Fan · « **Reply #108 on:** August 13, 2015, 06:24:25 AM »

Quote from: calj737 on August 13, 2015, 04:56:40 AM

Are you planning on a stock 750F caliper and MC? I hear rumors that they're not plentiful and those that you do find need a rebuild. Do keep me posted. If you find 1, find 2 and send it along to me for Springers build

Bill is still looking for a caliper and bracket. If I can source an extra, I definitely will.

SOHC4 Cafe Racer Fan · « **Reply #109 on:** August 14, 2015, 07:51:07 PM »

That pesky bolt/stud that was stuck . . .

image_zpszuggkxoj by Donald Leonhardt, on Flickr

is OUT!!!

Mike Rieck sent my cam and rockers out for hardweld and grind at Megacycle!!

SOHC4 Cafe Racer Fan · « **Reply #110 on:** August 17, 2015, 01:59:31 PM »

Rear wheel hub and brake sourced, courtesy of Bill Benton!! Thanks, Bill!

Bill is even doing me the favor of cutting out the spokes, since I don't need the stock rim/tire.

flatlander · « **Reply #111 on:** August 17, 2015, 11:01:00 PM »

good score!
ah come on, with a wire brush and a rattle can those spokes would look like new and the threads on that tire look good enough for a few more miles

SOHC4 Cafe Racer Fan · « **Reply #112 on:** August 18, 2015, 06:09:50 AM »

Quote from: flatlander on August 17, 2015, 11:01:00 PM

good score!
ah come on, with a wire brush and a rattle can those spokes would look like new and the threads on that tire look good enough for a few more miles

I think I'll hold out for the wider and lighter aluminum rim and stainless spokes!

SOHC4 Cafe Racer Fan · « **Reply #113 on:** August 19, 2015, 01:30:48 PM »

Got (cush drive) rubbers?

For the CB750F hub (coming from Bill Benton!).

SOHC4 Cafe Racer Fan · « **Reply #114 on:** August 20, 2015, 09:59:47 AM »

The crankshaft bearings check out good on the replacement crankcase, so that's good news. The crankshaft and transmission are all within spec, too. I am replacing both the primary and cam chains with new HD chains. I also have a NOS cam chain tensioner blade and a very lightly used (great condition) cam chain guide from Tom Witt!

calj737 · « **Reply #115 on:** August 20, 2015, 10:02:35 AM »

You're not spending enough on this rebuild, Don. Please step up and stimulate the economy.

SOHC4 Cafe Racer Fan · « **Reply #116 on:** August 20, 2015, 10:08:24 AM »

Believe it or not, much of this bike has been cobbled together from unused spare parts and preparation for building a bike for my nephew (who showed no interest). I don't know how pretty this one will be, but it should be a fun, little bike with a bit more grunt than my stock 550 motor. I dare say I am just as or more excited about this one than my (heavier) 750 build in progress.

SOHC4 Cafe Racer Fan · « **Reply #117 on:** August 20, 2015, 09:28:51 PM »

Quote from: calj737 on August 20, 2015, 10:02:35 AM

You're not spending enough on this rebuild, Don. Please step up and stimulate the economy.

Okay, Cal, you know my weakness. I realized I need a pair of rotors for the front end, so I called up Mike VanWieren at Riders Discount and he hooked me up with a pair of Galfer Wave Rotors for use with the GSXR front and Tokiko monoblock calipers.

I am still trying to decide the overall ride position of this bike -- whether I will go more upright, street tracker style or more racer for the street. I am leaning toward standard/naked hooligan (aggressive street rider with more relaxed body position). We'll see. I have a ways to go still.

calj737 · « **Reply #118 on:** August 21, 2015, 04:07:49 AM »

Definitely hooligan! It's the same for me and my R90. Pegs slightly back and super bike bars!

Retro Rocket · « **Reply #119 on:** August 21, 2015, 03:31:55 PM »

Don, I showed my daughter this and she said "but he looked nothing like your standard naked hooligan !!"....

calj737 · « **Reply #120 on:** August 21, 2015, 10:58:34 PM »

Quote from: Retro Rocket on August 21, 2015, 03:31:55 PM

Don, I showed my daughter this and she said "but he looked nothing like your standard naked hooligan !!"....

Voice of experience, Mick? Or, have you been parading around the house without your pants!

Retro Rocket · « **Reply #121 on:** August 22, 2015, 01:15:42 AM »

Quote from: calj737 on August 21, 2015, 10:58:34 PM

Quote from: Retro Rocket on August 21, 2015, 03:31:55 PM
Don, I showed my daughter this and she said "but he looked nothing like your standard naked hooligan !!"....
Voice of experience, Mick? Or, have you been parading around the house without your pants!

Nothing standard about me Cal....{runs away and puts pants on}

SOHC4 Cafe Racer Fan · « **Reply #122 on:** August 22, 2015, 04:46:14 PM »

I dropped of my frame to my buddy Jay's shop, along with the GSXR front end and Cognito wheel hub, so he can do the frame mods (gusseting, bracing, mods for tank mount, etc.). Jay also has an account with Buchanan's so he's ordering my spokes and Sun Rims and lacing up the fronts. I decided to go with the ContiRoadAttack2CR tires -- 18" front and rear.

Retro Rocket · « **Reply #123 on:** August 22, 2015, 04:49:00 PM »

Quote from: CB750 Cafe Racer Fan on August 22, 2015, 04:46:14 PM

I dropped of my frame to my buddy Jay's shop, along with the GSXR front end and Cognito wheel hub, so he can do the frame mods (gusseting, bracing, mods for tank mount, etc.). Jay also has an account with Buchanan's so he's ordering my spokes and Sun Rims and lacing up the fronts. I decided to go with the ContiRoadAttack2CR tires -- 18" front and rear.

Nice

SOHC4 Cafe Racer Fan · « **Reply #124 on:** August 22, 2015, 04:52:41 PM »

Quote from: Retro Rocket on August 22, 2015, 04:49:00 PM

Quote from: CB750 Cafe Racer Fan on August 22, 2015, 04:46:14 PM
I dropped of my frame to my buddy Jay's shop, along with the GSXR front end and Cognito wheel hub, so he can do the frame mods (gusseting, bracing, mods for tank mount, etc.). Jay also has an account with Buchanan's so he's ordering my spokes and Sun Rims and lacing up the fronts. I decided to go with the ContiRoadAttack2CR tires -- 18" front and rear.

Nice

Thanks for the heads up on those tires, Mick.

News:

Author Topic: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine (Read 127128 times)