« previous next »
Pages: 1 ... 24 25 [26] 27 28 29   Go Down

Author Topic: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine  (Read 124958 times)

0 Members and 23 Guests are viewing this topic.

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,006
  • I refuse...
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #625 on: February 27, 2017, 05:12:21 pm »
I see drool stains on that hub  :o
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,729
  • SOHC/4 Member #1235
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #626 on: February 27, 2017, 05:51:09 pm »
This is the one that was catching all the drool when you picked up yours!

There's even some pencil handwriting on it that says, "Cal was here."
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,966
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #627 on: February 27, 2017, 06:00:48 pm »
That is sexy as can be, Don!
Logged
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,006
  • I refuse...
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #628 on: February 27, 2017, 06:51:16 pm »
I thought that tongue print looked familiar  :-[
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,729
  • SOHC/4 Member #1235
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #629 on: March 03, 2017, 10:11:19 am »
Parts starting to trickle in for the wheels.  I also ordered the aluminum sprocket for the rear wheel (from Cognitomoto) to shave a pound or two.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #630 on: March 04, 2017, 08:36:35 am »
520 chain (& sprockets) saves weight too and takes less juice to spin. Come on Don dig deep.  ;D

What a prick huh?
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,729
  • SOHC/4 Member #1235
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #631 on: March 04, 2017, 09:10:07 am »
Quote from: bwaller on March 04, 2017, 08:36:35 am
520 chain (& sprockets) saves weight too and takes less juice to spin. Come on Don dig deep.  ;D

What a prick huh?

Yes (as to the 520).  Fortunately, Devin sells conversion sprockets (front and rear). 
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #632 on: March 04, 2017, 11:48:25 am »
Oh well done. I was joking of course but 520's are more than enough chain plus the combined weight savings including alloy rear sprocket is significant. They obviously won't last as long as a steel 530 but good chains and hard anodizing helps.
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #633 on: March 04, 2017, 04:25:59 pm »
Quote from: bwaller on March 04, 2017, 11:48:25 am
Oh well done. I was joking of course but 520's are more than enough chain plus the combined weight savings including alloy rear sprocket is significant. They obviously won't last as long as a steel 530 but good chains and hard anodizing helps.

I'm currently changing my 750 Kawasaki from 630 to 520, the 520 I'm using is stronger and far lighter than the 630, My friend has a 520 conversion on his GSXR1000 and he's the importer for the chains and sprockets  {all sizes}... ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #634 on: March 04, 2017, 08:18:32 pm »
Quote from: CB750 Cafe Racer Fan on February 27, 2017, 02:06:44 pm
My new Cognitomoto rear disc hub?



The machining is exquisite!

2 lbs heavier than a stock drum hub, but lighter than a CB750F disc hub (with disc and caliper, because the old hefty rotor, caliper and bracket).

Exquisite is right. That's some serious programming.
Any reason why Devin didn't increase the distance between the spoke flanges?
There should be lots of room to move them out. Much stronger wheel and better suited to wide rims.
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,729
  • SOHC/4 Member #1235
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #635 on: March 04, 2017, 10:03:01 pm »
Jim,

I'm not sure.  I can only surmise he kept it stock for overall fitment with the cush drive and spacers.  Cal might have more insight as he was the squeaky wheel that persuaded Devin to make the 550/750 hubs.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,006
  • I refuse...
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #636 on: March 05, 2017, 04:02:06 am »
Quote from: FunJimmy on March 04, 2017, 08:18:32 pm
Exquisite is right. That's some serious programming.
Any reason why Devin didn't increase the distance between the spoke flanges?
There should be lots of room to move them out. Much stronger wheel and better suited to wide rims.
Stock fitment. This hub is far stronger than stock already. Wide rims don't require different spacing on the spoke flange because the rim is centered tensioned, remember. If you spread the flanges, you'd need completely different hole geometry and likely non-stock spokes, and then you'd have to modify the Cush drive. No point, no value in it.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #637 on: March 05, 2017, 08:31:55 am »
Quote from: calj737 on March 05, 2017, 04:02:06 am
Stock fitment. This hub is far stronger than stock already. Wide rims don't require different spacing on the spoke flange because the rim is centered tensioned, remember. If you spread the flanges, you'd need completely different hole geometry and likely non-stock spokes, and then you'd have to modify the Cush drive. No point, no value in it.

Ya I don't see it that way. Strength of the hub wasn't (isn't ) an issue. You are right that wide rims don't require wide spoke flange spacing but it does create a stronger wheel. The wheel assembly benefits from wide spoke flange spacing not the rim. Anyone purchasing this hub and building a wheel will purchase NEW correct length spokes so that's covered. As far as I see it, the cush drive need not change to accommodate wider spoke flanges. I could demonstrate what this hub would look like with wide spoke flanges in minutes with Photoshop. The only sacrifice may be the symmetrical "V" shape of the flange centre due to the cush drive hub. Maybe that's the issue. Form over function.
« Last Edit: March 05, 2017, 08:35:17 am by FunJimmy »
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,006
  • I refuse...
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #638 on: March 05, 2017, 09:08:21 am »
It uses stock spokes. Part of the point of the product is a drop in replacement with stock parts. And the hub is MUCH MUCH stronger than stock as designed and cut.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,729
  • SOHC/4 Member #1235
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #639 on: March 14, 2017, 10:15:25 pm »
New hoops (and spokes) from Buchanan's arrived!

IMG_1066_zpsbsgrfrik by Donald Leonhardt, on Flickr
« Last Edit: July 03, 2017, 02:10:35 pm by SOHC4 Cafe Racer Fan »
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,729
  • SOHC/4 Member #1235
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #640 on: March 15, 2017, 08:02:03 pm »
Just got my sprockets, too.  520 front and rear with offset for the larger meat on the rear.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline riverfever

  • Master
  • *****
  • Posts: 1,796
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #641 on: March 15, 2017, 08:03:41 pm »
Logged
http://forums.sohc4.net/index.php?topic=127186.0

"You wouldn't think that out here...a man could simply run clear...out of country but oh my...oh my...nothing but the light." -Ben Nichols

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,729
  • SOHC/4 Member #1235
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #642 on: March 15, 2017, 08:04:32 pm »
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,006
  • I refuse...
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #643 on: March 16, 2017, 02:28:27 am »
Quote from: CB750 Cafe Racer Fan on March 15, 2017, 08:02:03 pm
520 front and rear with offset for the larger meat on the rear.
How much meat, Don?
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,729
  • SOHC/4 Member #1235
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #644 on: March 16, 2017, 07:25:45 am »
Nothing too large.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,966
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #645 on: March 16, 2017, 04:43:05 pm »
Quote from: CB750 Cafe Racer Fan on March 16, 2017, 07:25:45 am
Nothing too large.
That's what she said?  ::)
Logged
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html

Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,966
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #646 on: March 16, 2017, 06:57:56 pm »
Don, I have found the final piece for this bike.
Go this link and then type in 121G in the search window...seriously, just do it.  This is what all of us wish we could have for our bikes!
http://www.oreillyauto.com/site/c/home.oap
Logged
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,618
  • don't call me expert
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #647 on: March 16, 2017, 08:50:39 pm »
you will have to upgrade the charging system to make the most out of that. ;D
Logged
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,729
  • SOHC/4 Member #1235
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #648 on: March 16, 2017, 08:58:51 pm »
Quote from: Restoration Fan on March 16, 2017, 06:57:56 pm
Don, I have found the final piece for this bike.
Go this link and then type in 121G in the search window...seriously, just do it.  This is what all of us wish we could have for our bikes!
http://www.oreillyauto.com/site/c/home.oap

That is awesome!  http://www.oreillyauto.com/flux-capacitor.html
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,071
  • I love to restore & travel. Keep'em Going Strong !
Re: The Hot Mess - 1975 CB550F1 Frame/1981 CB650 Engine
« Reply #649 on: March 16, 2017, 09:56:37 pm »
They show it as "not available",must have sold-out 'Years' ago.  :D
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.
Pages: 1 ... 24 25 [26] 27 28 29   Go Up
« previous next »