« previous next »
Pages: [1]   Go Down

Author Topic: Seized engine  (Read 660 times)

0 Members and 1 Guest are viewing this topic.

Offline jordan.stevens.9469

  • Full Member
  • *
  • Posts: 4
Seized engine
« on: August 04, 2015, 03:32:05 PM »
Is the crankshaft bolt on the left side. (How can I get leverage on my crankshaft to un-seize the engine)
Logged

Offline eigenvector

  • Master
  • *****
  • Posts: 1,949
  • Member of the despondent public
Re: Seized engine
« Reply #1 on: August 04, 2015, 04:01:02 PM »
Do you know why it's seized?  I'd be asking that BEFORE trying to unseize it.
Logged
Rob
--------------------------------
2018 HD Softail Heritage
1979 CB750K Limited Edition
1977 CB550K
1984 CB700SC Nighthawk
1983 VF750S Sabre

Offline SOHC Digger

  • I'm not an
  • Expert
  • ****
  • Posts: 1,171
Re: Seized engine
« Reply #2 on: August 04, 2015, 04:08:58 PM »
As you are seated on the bike, bolt on the left side behind the alternator cover.
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,481
  • Central Texas
Re: Seized engine
« Reply #3 on: August 04, 2015, 04:38:29 PM »
Just to clarify, there is a differance between a "seized" engine and one that is "stuck".

Seized typically means a mechanical failure whereas a motor that has been sitting for a spell gets stuck, the rings rust to the cylinder walls.

Have you tried putting in gear and rocking it back and forth?
Some guys pour a "cocktail" of ATF/Acetone in the spark plug holes and let that penetrate a day or two and then try to break her free.
This has worked for me...
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: Seized engine
« Reply #4 on: August 05, 2015, 06:19:45 AM »
Might want to try a strap wrench around the alternator rotor itself, rather than trying it's mounting bolt.  You'll get more leverage that way.

The "nut" at the other end of the crankshaft (right side points cover) isn't really a nut at all but a nut-shaped fitting that's mounted to the ignition advancer shaft, which is only like 6mm or so.  Fine for indexing the motor during timing, but don't try to free a stuck motor with it or you'll snap it off.

mystic_1
Logged
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,365
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Seized engine
« Reply #5 on: August 06, 2015, 12:22:26 PM »
Rocking it in gear exerts more force and prevents breaking something with a breaker bar.
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline jordan.stevens.9469

  • Full Member
  • *
  • Posts: 4
Re: Seized engine
« Reply #6 on: August 06, 2015, 06:10:46 PM »
I have been rocking it back and forth for about a week now, I got it to move a bit and then as I kept moving it, it froze once more.  Now it will not budge. So I tried taking off the head, after getting the valve cover off I realized I can't get to one of the camshaft sprocket bolts because I can't get the engine to move. Where do I go now? I've heard "sacrifice the sprocket and get some leverage on that" but that just doesn't seem kosher to me. Where do I go from here?
Logged

Offline jordan.stevens.9469

  • Full Member
  • *
  • Posts: 4
Re: Seized engine
« Reply #7 on: August 06, 2015, 06:14:25 PM »
Let me know if you guys need pictures.
Logged

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Seized engine
« Reply #8 on: August 06, 2015, 07:14:06 PM »
I think I would be more inclined to stick it on the bench and remove the bottom case before I started cutting things up. ;)

Cheers,
Brian
Logged
The older I get the faster I was.

Offline rundogdave

  • Full Member
  • *
  • Posts: 47
Re: Seized engine
« Reply #9 on: August 06, 2015, 09:03:52 PM »
I had the same issue a few weeks ago. Engine frozen up for an unknown reason. Rocking it didn't work. Cam sprocket bolts at the 12 and 6 o'clock position. I ground down a box wrench to get over the bolt head for the bolt at the 6 o'clock position. Didn't have to cut the cam chain.
Logged
Pages: [1]   Go Up
« previous next »