« previous next »
Pages: [1]   Go Down

Author Topic: found a cam.. but dont know what it is.. =)  (Read 669 times)

0 Members and 1 Guest are viewing this topic.

Offline fr33man

  • Full Member
  • *
  • Posts: 68
found a cam.. but dont know what it is.. =)
« on: August 05, 2015, 01:44:08 pm »
hey gang,
is anyone able to make some sense of these writings from the cam..

made in USA EP 13 D1 1,5 C1 K18
 5:11 and CX2

i do get the made in usa part ;) i have a rebuild 836 with cr29 and looking for upgrades =)
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,453
  • Bike almost back to the 70's 2015
Re: found a cam.. but dont know what it is.. =)
« Reply #1 on: August 05, 2015, 02:52:23 pm »
Cycle X   
CX2 cam
.360 valve lift
280 degree duration
Made for Cycle X by Web-cam  Equivalent to 41A grind
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967
Pages: [1]   Go Up
« previous next »