Topic: CR carby questions

[Scott]

G'day, how's it going
 
What do you put on the thread of the aluminum  adapter that connects the carbys to the inlet rubbers.

Please and thanks
Scott

[turboguzzi]

nothing in my case..... there should be a thin o-ring in there, #5 in the pic

[Scott]

Cool ta.  I just licked the ring and screwed it.

Sounds about right doesn't it?

Do you have a standard petcock.  If so how did you go from the petcock size fuel line to the carby size.  Maybe 6 to 8mm

Thanks for your time
Scott

[Don R]

 One of mine has shrink tube over the poly fuel line, shrunk it down and holds it tight.

[Scott]

Thanks Don

I looked on ebay last night and with the correct wording I found a straight through adapter that goes from 6mm to 8mm.  I also ordered a 6mm T to get both my 6mm fuel lines into 1 before I adapt it to 8mm.  I bought a selection of plastic and brass so hopefully I can make something out of it.

Have a good one
Scott

[turboguzzi]

that easy, slip a piece of thin tubing over the 6mm fitting, and the 8mm tube over it. done