I’m excited to announce my venture of custom triple trees. I have recently set up a mill and lathe in my home shop to fabricate parts for my bikes and help other locally when I can. Anyone who has seen my build has seen the custom triple trees that I made to accommodate the forks/brakes I wanted to use. I found it very difficult to find custom triple trees, both with regard to dimensions and style. The designs I have created thus far are shown below.
I will be offering CB750 clamps in the early and late offset, as well as GL1000 clamps. I am also willing to work with someone who needs something even more custom, like specific offset or spread. Custom offset/spread items will need to be designed for the customer specifically and will take additional time and cost.
I realize there are many options available for the SOHC enthusiast, but I think there is room for low volume, high quality hand-made items.
This stuff is not coming off of a $100k CNC mill but rather is rough cut via waterjet, then hand finished. Each triple will come standard with stainless Allen hardware for the stem pinch (if included) and the fork pinch. Each will also be media blasted for a uniform finish ready for powder. The work involved in hand polishing these items is more than I am prepared for currently, but others on the forum offer polishing for very reasonable prices.
