« previous next »
Pages: [1]   Go Down

Author Topic: Valve Production Run Finished  (Read 1079 times)

0 Members and 1 Guest are viewing this topic.

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Valve Production Run Finished
« on: September 05, 2015, 01:02:05 pm »


New production run of Honda sohc 750 valves just completed.

These valves are real stainless steel and have hard chrome stems. APE is the only one that makes this valve, and it is available direct from APE, thru all APE distributors and all leading cylinder head shops.

APE developed these valves as an addition to our ever expanding real race valve line, when we became involved with the restoration of the R.C. Engineering iconic top fuel motorcycles, once ridden by the legendary Russ Collins. We found when doing the cylinder heads, that there were no valves available that you would want to run in a supercharged nitro Honda.

Now all Honda sohc 750 owners can benefit from this by the availability of a true high performance valve for every Honfa sohc 750.

They are available in std size, as well as 1.5mm oversize intake and 1 mm oversize exhaust.  These valves racer at $24.95 each. Why settle for anything less in your engine.    http://cbrzone.com/sohc.html

Logged

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,152
  • SOHC4 member # 2605
Re: Valve Production Run Finished
« Reply #1 on: September 05, 2015, 02:13:37 pm »
Should that post be reported for too much bike parts porn in one post?
 ;D :P 8)
Good job Big Jay! Thank you for the continued support and all the great work that comes out of APE.

David
Logged
David- back in the desert SW!

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,719
  • SOHC/4 Member #1235
Re: Valve Production Run Finished
« Reply #2 on: September 05, 2015, 06:06:56 pm »
Agreed!! Thanks to you and APE for all of the sweet parts for our machines, the helpful advice from staff and sponsorship of the forum!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline johno

  • Expert
  • ****
  • Posts: 1,314
Re: Valve Production Run Finished
« Reply #3 on: September 06, 2015, 01:21:24 am »


Yeh I bought a set about a month ago for my new 1,000cc class salt bike
I'm a bit of a stainless junky anyway and thought at least the valves wont rust after getting a gutsfull of salt after a run on the salt. ;D
Logged
GRASSHOPPER SOHC HONDAS ARE THE MEANING OF LIFE.
Pages: [1]   Go Up
« previous next »