« previous next »
Pages: [1]   Go Down

Author Topic: Keihin PD46A rebuild kits?  (Read 1351 times)

0 Members and 1 Guest are viewing this topic.

Offline eoddom

  • Enthusiast
  • **
  • Posts: 141
Keihin PD46A rebuild kits?
« on: September 28, 2015, 11:17:38 AM »
Anyone know of places that would carry rebuild kits for a 77-78 CB550?  I have the Keihin PD46A carbs but all I'm finding are kits on ebay that ship from Japan and Taiwan for around 40 bucks.  Would like to find a good quality kit that I can order here in the states.
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: Keihin PD46A rebuild kits?
« Reply #1 on: September 28, 2015, 11:49:29 AM »
what parts do you actually need?

check this...
http://4into1.com/search.php?search_query=carb+kit+cb550&Search=
« Last Edit: September 28, 2015, 11:51:25 AM by flybox1 »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline eoddom

  • Enthusiast
  • **
  • Posts: 141
Re: Keihin PD46A rebuild kits?
« Reply #2 on: September 28, 2015, 12:25:10 PM »
In theory I should just need gaskets, orings and float needle yeah?  Jets should be fine.
Logged

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 14,061
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Keihin PD46A rebuild kits?
« Reply #3 on: September 29, 2015, 11:07:06 AM »
Maybe check with PartsNmore.com? They have float valves, among other things.
Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline eoddom

  • Enthusiast
  • **
  • Posts: 141
Re: Keihin PD46A rebuild kits?
« Reply #4 on: September 29, 2015, 11:18:30 AM »
Well for now I just ordered a kit with gaskets, orings and float needle.  I'm hoping all the original brass can just be cleaned.  I'm going to try and atleast get the carbs off and the bowls off to see how bad they look on the inside.
Logged

Offline Johnny340

  • Hot Shot
  • ***
  • Posts: 431
Re: Keihin PD46A rebuild kits?
« Reply #5 on: September 29, 2015, 10:35:26 PM »
Logged
1975 CB750F0 Super Sport
1972 CB750K2
1981 CB650
1974 T-500
2003 GSXR750
2006 YZ250

Offline GV1390

  • Hot Shot
  • ***
  • Posts: 585
  • Express Gratitude.
Re: Keihin PD46A rebuild kits?
« Reply #6 on: October 05, 2015, 05:18:33 AM »
Logged
93' GSX-R1100, 78' CB550, 71' CL350, 71’ CB500 & 02' ZRX1200R.
Pages: [1]   Go Up
« previous next »