Author Topic: Who has F**k You Money (Read 2838 times)

Powderman · « **on:** October 16, 2015, 09:11:32 AM »

And if you did would even consider this. I was checking prices because I will be parting out a sandcast shortly and found this. Some people really do have Delusions of Granduer.

http://www.ebay.com/itm/Honda-CB750-NOS-Tank-CB750-Fuel-Tank-Sandcast-1969-Honda-1970-Honda-CB750-/262035039745?hash=item3d02816601:g:CpkAAOSwd0BV2oae&vxp=mtr

SOHC4 Cafe Racer Fan · « **Reply #1 on:** October 16, 2015, 11:57:16 AM »

That is ludicrous. I like how his listing title has "Sandcast" in it but it's admittedly a Diecast.

Chachi · « **Reply #2 on:** October 16, 2015, 11:58:43 AM »

But hey, it comes shipped double-boxed.

Duke McDukiedook · « **Reply #3 on:** October 16, 2015, 12:22:01 PM »

But, is it wrinkley?

Powderman · « **Reply #4 on:** October 16, 2015, 01:07:49 PM »

I didn't pay attention to the shipping charges. Guy has a lot of balls asking $50 shipping on a tank that he wants $3200 for.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #5 on:** October 16, 2015, 01:25:27 PM »

Maybe the boxes are sandcast!

Don R · « **Reply #6 on:** October 16, 2015, 01:48:30 PM »

He should go pound sand.

RAFster122s · « **Reply #7 on:** October 16, 2015, 01:48:36 PM »

Quote from: Jerry Rxman Griffin aka MuthaF'er on October 16, 2015, 01:25:27 PM

Maybe the boxes are sandcast!

Hand laid paper construction, you know that takes ForEver...dontchayaknow?

Henning · « **Reply #8 on:** October 16, 2015, 02:10:21 PM »

Agreed, price is nutty. Out of curiosity, why are you parting out a sandcast? Pics?

theslayedsaint · « **Reply #9 on:** October 16, 2015, 02:42:11 PM »

Maybe the bike comes with it!

Powderman · « **Reply #10 on:** October 16, 2015, 03:02:55 PM »

Quote from: Henning on October 16, 2015, 02:10:21 PM

Agreed, price is nutty. Out of curiosity, why are you parting out a sandcast? Pics?

I inherited it from my brother who passed away earlier this year. I also inherited his 70 Triumph Tiger 650 and a 1955 Norton Featherbed model 88 with a 1974 Kawasaki H2 motor in it. The Norton is complete, the Triumph has the top end off it. I plan on restoring the Triumph and using it as a daily rider, it holds much sentimental value to me. The Kawaton I will sort through to make it road worthy and then probably flip it. I don't have the time nor money needed to restore the sand cast, so it will be flipped to fund the other 2.
They are in Calif. right now and will be a couple of months before I can get them shipped to here in Ga. I'll post pics when I receive them.

PeWe · « **Reply #11 on:** October 17, 2015, 02:56:52 AM »

Same kind of tank for $630US. NEW tank! I do not know import costs to USA.
http://www.yamiya750.com/index.php?main_page=product_info&cPath=246_251_182_80&products_id=1524

Wrinkle tank $2360US, NEW tank. Why so much more for those wrinkles that must be a consequence of bad method forming the metal, right?
http://www.yamiya750.com/index.php?main_page=product_info&cPath=246_251_182_80&products_id=650

Fuel cap has to be added on the Yamiya tanks...

The old tanks on eBay are no longer interesting when Yamiya sell good tanks of a wonderful finish!!

buffalogt750 · « **Reply #12 on:** October 17, 2015, 06:43:02 AM »

3200 or make offer. I offered 50 bucks to be as ridiculous as the seller. My offer was declined.

theslayedsaint · « **Reply #13 on:** October 17, 2015, 10:12:33 AM »

oh now that sounds like fun buffalogt750! maybe we all should offer him $50 hahah

kmb69 · « **Reply #14 on:** October 17, 2015, 10:20:42 AM »

Quote from: Powderman on October 16, 2015, 09:11:32 AM

.....
I will be parting out a sandcast shortly
.....

What are the VIN and Engine numbers?

Powderman · « **Reply #15 on:** October 17, 2015, 10:40:55 AM »

I'll need to check on the frame VIN but motor is 1644.

Powderman · « **Reply #16 on:** October 17, 2015, 10:41:53 AM »

Quote from: theslayedsaint on October 17, 2015, 10:12:33 AM

oh now that sounds like fun buffalogt750! maybe we all should offer him $50 hahah

Not all at $50, second should be $51 , then $52,etc.

Kenzo · « **Reply #17 on:** October 18, 2015, 07:14:43 AM »

I know a guy who races a 1925 Bugatti T-35A.

Monterey tour d'elegance and other venues.

If he needed that tank...

...(*edit* as a seller) when negotiating you don't start low and work up!

Cheers

RAFster122s · « **Reply #18 on:** October 18, 2015, 10:27:02 AM »

Problem is that guy is only going up unless he reprices it during an auction or offers it after an auction.

You can get a new tank and have it painted by a very good professional cheaper than this guy wants to start at.

His poop does smell either, he thinks.

David

Powderman · « **Reply #19 on:** October 18, 2015, 11:40:47 AM »

I understand you are looking for the one sucker in the crowd, but at that price it has to be a pretty big crowd to find that sucker. Like I said, if I was building a 1005 concourse restoration and that was the last one left I could find, then maybe. But there are too many other options available to spend that kind of stupid money.

oldhatt45 · « **Reply #20 on:** October 18, 2015, 12:10:03 PM »

All I can say is that I want the Name, Address & email of whoever buys that tank for that money.
I have a bridge I want to sell.

Charlie

Dunk · « **Reply #21 on:** October 18, 2015, 12:52:59 PM »

I don't see where the value of that can be anything more than slightly above Yamiya. They make some very good repro products. I have a Yamiya tank and am 100% pleased with it. IMO opinion their tanks and other body parts are very fairly priced when comparing to the time and money to repair rust, fix dents, have a body man do his magic, etc.

Powderman · « **Reply #22 on:** October 18, 2015, 04:39:05 PM »

Yamiya gets $639 for a painted repro K0 tank, $2369 for a painted NOS Honda wrinkle tank. This guy is just nuts. He's not only looking for the sucker in the crowd, but the sucker who doesn't know how to shop.

martin99 · « **Reply #23 on:** October 18, 2015, 05:06:24 PM »

Aw sh1t! He doesn't post to the United Kingdom! Now that's just not fair!

Rocky2010 · « **Reply #24 on:** October 18, 2015, 08:11:18 PM »

Crazy price, wouldn't pay for that no matter how original I wanted the bike to be.
But I guess there is someone out there with money to burn

News:

Author Topic: Who has F**k You Money (Read 2838 times)