Topic: Solenoid rubber mount?

[Bootsey]

My 1975 CB550K came to me missing the starter solenoid & rubber solenoid mount that attaches to the electrical panel. I have a replacement solenoid, but haven't been able to find the rubber mount.

The fiche on CMSNL & Bike Bandit don't show the part, so I haven't got a part number.

Just wondering if anyone might have a spare or might be able to suggest an alternate solution/part? I could buy a cheap chinese solenoid off ebay, but not sure if the mount is the same size & configuration.
Could also figure out another way to mount it, but I'd rather not have to hack the panel, so just thought I'd put it to the brains trust first.

[DaveBarbier]

Part 39, no?
http://www.cmsnl.com/honda-cb550k0-four-1975-usa_model465/partslist/F++09.html#results

[Airborne 82nd]

This is the part # for a 75 (35856-323-000) Shows not available and does not cross ref. to anything I can find Part 39 here.
http://www.westernhonda.com/fiche_section_detail.asp?section=2450248&category=Motorcycles&make=Honda&year=1975&fveh=131064
  In a jam you could get a sol. at NAPA for a car or lawn mower that mounts with two screws but be sure to check the amp rating. This would be easy quick and cheap. Maybe a 550 guy will chime in with what you want also post in parts wanted. http://forums.sohc4.net/index.php/board,176.0.html
or parts for sale.
http://forums.sohc4.net/index.php/board,174.0.html
 Airborne
edit Dave is to fast

[DaveBarbier]

[RevDoc]

Bootsey, try shooting an email to Roger at imrwallick@osprey.net for this. He has a recycle yard in South Carolina that at one time had about 3,000 Japanese bikes and may have the rubber mount you need. He has helped with odd parts I have needed in the past. Tell him Dana in Pennsylvania referred you.

[Bootsey]

Part 39, no?
http://www.cmsnl.com/honda-cb550k0-four-1975-usa_model465/partslist/F++09.html#results

Thanks Dave, that's the one, not sure how I missed that part number...

This is the part # for a 75 (35856-323-000) Shows not available and does not cross ref. to anything I can find Part 39 here.

Perfect, cheers for the info Airborne.

Bootsey, try shooting an email to Roger at imrwallick@osprey.net for this. He has a recycle yard in South Carolina that at one time had about 3,000 Japanese bikes and may have the rubber mount you need. He has helped with odd parts I have needed in the past. Tell him Dana in Pennsylvania referred you.

Thanks RevDoc - I probably should have mentioned I'm in Australia, but I'll keep it in mind.

I see David Silvers has the part for special order, so I'll contact them and see if they can get one for me.

[RevDoc]

Bootsey, if Roger has one for you, his prices are so low that even with the minimal postage it would take to get that small part to Australia it would probably be a lot less than a special order through David Silver!