So my dad brought some scrap acrylic from work and I thought it would be a good idea to make a clear clutch cover. So with a few old bits from work I started carving away. It may or may not work but hey it's fun to make. Doing some reserch This plastic melts 100 degrees hotter than the engine will get on a hot day so hopefully that won't destroy it. One worry will be the clutch actuator applying enough pressure to crack it. May be a little crappy because I'm using an old drill press and worn bits that were used on a cnc and just moving around by hand, but hell who cares if it works, it works. I'll update as I get further
