« previous next »
Pages: [1]   Go Down

Author Topic: Yet another problem found  (Read 2242 times)

0 Members and 1 Guest are viewing this topic.

Offline fodzilla

  • Enthusiast
  • **
  • Posts: 133
Yet another problem found
« on: November 03, 2015, 01:24:41 AM »
Hi All,

SO I dropped the bowl on number 4 carb and found the post that the float pin runs through to be snapped.  The previous owner looks to of used a waxed/plastic to wrap around it and hold it in place without catching the bowl.   But I don't want it moving and causing problems later down the road.

Can anyone advise if metal glue would work? Or would the fuel just melt anything like this away?

Here's something that I found but I've never used it before.

http://www.amazon.co.uk/ARALDITE-RAPID-STEEL-ADHESIVE-STRONG/dp/B000WA9QIU

Logged
CB500 Four K1 '75

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: Yet another problem found
« Reply #1 on: November 03, 2015, 04:32:10 AM »
If I were you, I would seek someone locally who can micro weld it. Theres a guy here in the states that offers the service (on Services Offered section) but I appreciate shipping fees from the UK and back... Perhaps someone could also braze it?

I am not a fan of adhesives inside fuel environments.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Yet another problem found
« Reply #2 on: November 03, 2015, 06:51:21 AM »
+1 to microwelding, but if not available....sleeve it with some brass tubing + jb weld
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline fodzilla

  • Enthusiast
  • **
  • Posts: 133
Re: Yet another problem found
« Reply #3 on: November 03, 2015, 02:10:51 PM »
Thanks for the tips! I'll let you know how I get on with it.  Fingers crossed!

Logged
CB500 Four K1 '75

Offline Bailgang

  • Scott
  • Old Timer
  • ******
  • Posts: 2,705
  • Indiana
Re: Yet another problem found
« Reply #4 on: November 03, 2015, 02:19:54 PM »
Or hopefully you can find someone who's really good with a TIG welder. My brother in law who is awesome with a TIG repaired a broken float post from a 550 carb I had.
Logged
Scott


71 cb350 twin
77 cb750 F2
83 gl1100 Interstate

Offline millla03

  • Enthusiast
  • **
  • Posts: 111
Re: Yet another problem found
« Reply #5 on: November 05, 2015, 07:01:43 PM »
I also had one of the posts I broke on my carbs TIG welded by one of dad's friends. Good, permanent fix in my opinion if you can find someone to do it.

Good luck!
Logged
Luke

72 Honda CB750 K2
78 BMW R100/7
83 Honda Nighthawk 650
07 Honda Rebel 250

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,420
  • Dr. Bovinestein iBa#80333
Re: Yet another problem found
« Reply #6 on: November 05, 2015, 07:23:47 PM »
i've seen single carb bodies on ebay occassionally!
Logged

Offline harisuluv

  • Master
  • *****
  • Posts: 2,009
Re: Yet another problem found
« Reply #7 on: November 05, 2015, 07:33:31 PM »
I sell just about every spare SOHC carb body.  All my spare bodies are already soda blasted clean.  All I need to know is the casting number you want and which # cylinder it is for.

Price is usually $40 SHIPPED.
Logged

Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,966
Re: Yet another problem found
« Reply #8 on: November 05, 2015, 07:34:57 PM »
Quote from: calj737 on November 03, 2015, 04:32:10 AM
If I were you, I would seek someone locally who can micro weld it. Theres a guy here in the states that offers the service (on Services Offered section) but I appreciate shipping fees from the UK and back... Perhaps someone could also braze it?

I am not a fan of adhesives inside fuel environments.
cal,
You are the man.  I have a carb needing this from an extra set I have.  So I pulled up his info and was going to call him about sending him my carb tomorrow. 
Turns out he's here in Dacula, GA in the Atlanta metro area.  May even be able to save myself the shipping and just deliver it to him!
 8)
Logged
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: Yet another problem found
« Reply #9 on: November 06, 2015, 02:42:46 AM »
Quote from: Restoration Fan on November 05, 2015, 07:34:57 PM
cal,
You are the man. ...May even be able to save myself the shipping and just deliver it to him!
 8)
I work on commission, Ron  ;)
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,966
Re: Yet another problem found
« Reply #10 on: November 06, 2015, 05:17:39 AM »
Quote from: calj737 on November 06, 2015, 02:42:46 AM
Quote from: Restoration Fan on November 05, 2015, 07:34:57 PM
cal,
You are the man. ...May even be able to save myself the shipping and just deliver it to him!
 8)
I work on commission, Ron  ;)

LOL, well I've offered many times to buy you dinner if you would actually stop in Atlanta instead of jetting on through when you're on your way to/from Virginia. 
Logged
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: Yet another problem found
« Reply #11 on: November 06, 2015, 11:23:35 AM »
I will soon, I promise. Just always so pressed for time... I did get to meet Wilbur a few weeks back. That was spectacular!
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Yet another problem found
« Reply #12 on: November 06, 2015, 04:47:35 PM »
Damn ron,now you done gone and given cal the big head,he'll never let it go
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3
Pages: [1]   Go Up
« previous next »