Author Topic: Samauto II RC1080cc, RC crank and Golden rods, 327 cam etc, CB750 Automatic (Read 52631 times)

Bill/BentON Racing · « **Reply #275 on:** March 23, 2016, 09:13:13 AM »

We ran better number's than RC did when there's was 970cc with same cam! They only managed 12.5's! K.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #276 on:** March 23, 2016, 09:16:41 AM »

How's Mike's forensic investigation coming along?

Bill/BentON Racing · « **Reply #277 on:** March 23, 2016, 09:22:01 AM »

The elusive Mr. Rieck? Haha, he's working on it....and that's good enough for me! We are changing a few things...and that's all you get for now! Lol, Bill I knows we spending money! LMAO

Sam Green Racing · « **Reply #278 on:** March 23, 2016, 01:03:04 PM »

Quote from: Bill/BentON Racing on March 23, 2016, 09:10:56 AM

Cam, haha, now that's a story until itself. It was running a RC 295 Dynoman cam at the end with 915, Stage IV head. 12.05 best ET,he backed off to not breakout, 1.912 best 60ft. Ran 7's in 1/8. 116.xx was best mph, but I got 119.xx at the end!
Scary as we never found out why Sam went down!

and it's no good asking me.

MRieck · « **Reply #279 on:** March 23, 2016, 01:26:55 PM »

Quote from: Jerry Rxman Griffin aka MuthaF'er on March 23, 2016, 09:16:41 AM

How's Mike's forensic investigation coming along?

Nothing overtly wrong....primary chain very loose.

dragracer · « **Reply #280 on:** March 23, 2016, 02:32:28 PM »

I wasn't there.

Bill/BentON Racing · « **Reply #281 on:** March 23, 2016, 03:03:23 PM »

Oh good, now I can sleep again!

Was it ever replaced,don't ask me! Lol.

Bill/BentON Racing · « **Reply #282 on:** March 23, 2016, 09:49:56 PM »

OK, I know Mike put a new one in when he built it!

POPS 911 · « **Reply #283 on:** March 24, 2016, 04:00:34 AM »

At IDBA races I watched CHAD make many passes and never seen him wheelie much, but he got many win tickets = their is a reason I called him BIG KID w/a smile as he was 200+ pounds. One of the best PRO RACERS that gave " GOT BRUCE " BIKES A RUN FOR THE MONEY had his clutch lever hooked to a air cylinder on his rear foot brake lever so when he pulled in his clutch this held the brake down and locked, turned on and off with a toggle switch before and after launch, he had a lock up in that GS motor. Never seen him red light.... no KREEPING on two step.
TURBOD , when Muncie opens for a test and tune I will drive over for A DASH FOR CASH , gone are those Tim Mills days, packed house good food.
BILL MWS: Your not going to put domed pistons in a TURBO bike

?? I would like to see MATIC run 10's before it lifts head and blows out head gasket.

Bill/BentON Racing · « **Reply #284 on:** March 24, 2016, 04:06:01 AM »

POP'S, yep no domes in the turbo, no need, just turn up the boost! Lol.

Bill/BentON Racing · « **Reply #285 on:** March 24, 2016, 07:15:03 PM »

My little RC836+ coming together! Remember I gotta 7mm stroker crank!

jweeks · « **Reply #286 on:** March 24, 2016, 07:35:17 PM »

Quote from: Bill/BentON Racing on March 23, 2016, 09:13:13 AM

We ran better number's than RC did when there's was 970cc with same cam! They only managed 12.5's! K.

Sam's 836 ran 12.31 best. I don't think that RC had the CV carb choices that we're using.

Bill/BentON Racing · « **Reply #287 on:** March 24, 2016, 10:00:04 PM »

Wasn't it a 836 when I took it to the finals in 2012 or 13 at Commerce? We ran 12.25, 26, 27 and 24 that night! , Maybe a 12.28.Maybe it was already a 915? Sometimers done got me! Yes, but he had Byron Hines, lol! And more cc's!

Old Scrambler · « **Reply #288 on:** March 25, 2016, 07:36:40 AM »

Bill........Memories of past events.......are best supported with a LOG BOOK............I have fewer bikes but now on 4th iteration........so I started keeping records with dates

MRieck · « **Reply #289 on:** March 25, 2016, 10:32:11 AM »

Quote from: Old Scrambler on March 25, 2016, 07:36:40 AM

Bill........Memories of past events.......are best supported with a LOG BOOK............I have fewer bikes but now on 4th iteration........so I started keeping records with dates

Boy if that ain't the truth. I have trouble remembering my kids birthdays!

Medyo Bastos · « **Reply #290 on:** March 25, 2016, 10:40:20 AM »

Quote from: MRieck on March 25, 2016, 10:32:11 AM

Boy if that ain't the truth. I have trouble remembering my kids birthdays!

when you get my age you'll have trouble remembering your kids

Jerry Rxman Griffin aka MuthaF'er · « **Reply #291 on:** March 25, 2016, 12:09:03 PM »

Trying to forget my one and only

TurboD · « **Reply #292 on:** March 25, 2016, 03:45:18 PM »

POPS Muncie is now having the Test and Tune on Thursday's. I will let you know when I plan to go.

Yes Tim Mills (RIP) had some great races. "No Doubt About it"

Retro Rocket · « **Reply #293 on:** March 25, 2016, 03:50:13 PM »

Quote from: Medyo Bastos on March 25, 2016, 10:40:20 AM

Quote from: MRieck on March 25, 2016, 10:32:11 AM
Boy if that ain't the truth. I have trouble remembering my kids birthdays!

when you get my age you'll have trouble remembering your kids

What kids....

Sam Green Racing · « **Reply #294 on:** March 27, 2016, 04:18:26 PM »

Quote from: Bill/BentON Racing on March 24, 2016, 10:00:04 PM

Wasn't it a 836 when I took it to the finals in 2012 or 13 at Commerce? We ran 12.25, 26, 27 and 24 that night! , Maybe a 12.28.Maybe it was already a 915? Sometimers done got me! Yes, but he had Byron Hines, lol! And more cc's!

It was 2012 Billy, I rode in the same event in 2013, it would have been an 836.

Bill/BentON Racing · « **Reply #295 on:** March 27, 2016, 07:15:45 PM »

Yes Sam, I thought it was 2012. Dennis, these are for you and Jon! Lol. A logbook! ,12.26 dial to go to finals, ran a 12.262! Yeh, an automatic can be deadly! Look ,12.18 the best when it was 836cc, 1.9's 60 ft. We going to be dem pesky automatic's again! K, Bill

Sam Green Racing · « **Reply #296 on:** March 28, 2016, 02:34:47 AM »

It might be an idea to check with Man Cup to see if they still let autos in street ET, I saw something that said it has to be hand opperated.

Sam.

Retro Rocket · « **Reply #297 on:** March 28, 2016, 06:09:05 AM »

Quote from: Sam Green Racing on March 28, 2016, 02:34:47 AM

I saw something that said it has to be hand operated.
Sam.

You sure they didn't mean the rider, they've seen you blokes at the track before...

:P

dragracer · « **Reply #298 on:** March 28, 2016, 06:18:14 AM »

Sam.
Here's your answer when I questioned the same thing you mentioned. And its directly from Jon Weeks.
Here

Quote from: jweeks on March 22, 2016, 07:31:40 PM

Frank - Sam and I have been through this. Clutch guys use a line lock to hold bike on starting line with a dragging clutch. Sam asked the powers that be. Yes, line locks on rear brakes are legal in Street ET. It's considered a safety item. I don't assume, I ask. Hondamatics use the line lock on the starting line to prevent creeping forward, just like clutch bikes. I just leave harder when the line lock is released... I welcome protests. Educating fellow racers doesn't take long so long as the officials are doing the talking. Chain guard - check, lights - check, tires with tread - check, no two step - pull the tank - check, fuel shutoff - check. Protests won't take 5 minutes.
Hondamatics don't have to just race in Street ET.
Automatics are not clutch bikes. The setups are very different. Give a guy who has been racing them since 1985 a little credit on knowing a little about racing them. That's why I say that it will take a Hondamatic to win the SOHC purse for Street ET.

kmb69 · « **Reply #299 on:** March 28, 2016, 06:34:12 AM »

Quote from: Retro Rocket on March 28, 2016, 06:09:05 AM

Quote from: Sam Green Racing on March 28, 2016, 02:34:47 AM
I saw something that said it has to be hand operated.
Sam.

You sure they didn't mean the rider, they've seen you blokes at the track before... :P

Quote from: dragracer on March 28, 2016, 06:18:14 AM

Sam.
Here's your answer when I questioned the same thing you mentioned. And its directly from Jon Weeks.
.....

Not sure that answers the question. I saw the same thing in the 2016 Rules. Something about has to be able to kill engine with clutch release.
Billy needs to check with ManCup as they were making more rule changes last week regarding the new 1st round stuff.

News:

Author Topic: Samauto II RC1080cc, RC crank and Golden rods, 327 cam etc, CB750 Automatic (Read 52631 times)