« previous next »
Pages: [1]   Go Down

Author Topic: 1975 CB400F doubled swingarm pivot bushings??  (Read 1503 times)

0 Members and 1 Guest are viewing this topic.

Offline jcongelio

  • Full Member
  • *
  • Posts: 4
1975 CB400F doubled swingarm pivot bushings??
« on: September 27, 2018, 06:32:24 PM »
What’s up guys - my first post here. I cut my teeth on a CB200 a few months ago and now onto #2   :)
I have everything stripped down prepping for powdercoating and ran into a curiosity with the swingarm pivot bushings. There seems to be 2 on each side. See the attached picture. The outermost is the plastic/fiber variant but it looks like there is another steel one as well? Anyone ever seen this?
The parts manual only shows 1 and any picture I can find doesn’t look like this. I just want to know what I’m working with before I start the surgery of removing them

Thanks for your input
Logged

Offline rickmoore24

  • Be led by your dreams, not pushed by your problems.
  • Hot Shot
  • ***
  • Posts: 747
  • I <3 SOHC4's
    • Rosenbard Films
Re: 1975 CB400F doubled swingarm pivot bushings??
« Reply #1 on: September 30, 2018, 07:14:35 AM »
The parts fiche is probably correct. I'll go take a look at mine (it's still on the bike though) and see if I can tell what's there. :) Rick.
Logged
1972 CB750 K2 (Daily Runner)
1972 CB750 K2 (Sold)
1973 CB750 K3 (Hardtail 836cc)
1998 CBR F3 - R.I.P., went down on the 101 in Calabasas, Ca.
1995 EG6

Offline rickmoore24

  • Be led by your dreams, not pushed by your problems.
  • Hot Shot
  • ***
  • Posts: 747
  • I <3 SOHC4's
    • Rosenbard Films
Re: 1975 CB400F doubled swingarm pivot bushings??
« Reply #2 on: September 30, 2018, 07:15:54 AM »
Here is what Yamiya shows. Link below as well. Rick.

http://www.yamiya750.com/index.php?main_page=index&cPath=179_274_195_235
Logged
1972 CB750 K2 (Daily Runner)
1972 CB750 K2 (Sold)
1973 CB750 K3 (Hardtail 836cc)
1998 CBR F3 - R.I.P., went down on the 101 in Calabasas, Ca.
1995 EG6

Online Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,886
  • Saver of unloved motorcycles.
Re: 1975 CB400F doubled swingarm pivot bushings??
« Reply #3 on: October 05, 2018, 05:33:06 PM »
 Are you seeing the collar #9?
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,346
Re: 1975 CB400F doubled swingarm pivot bushings??
« Reply #4 on: October 07, 2018, 05:49:31 PM »
I realize this diagram is for a CB450K2, but I think maybe I found your answer.
https://www.partzilla.com/catalog/honda/motorcycle/models-with-no-year/cb450k2-a/rear-fender-swingarm

Notice #11 and#14, 11 is the thrust bushing, 14 is a felt washer. Could that be what you're looking at?
Logged
Pages: [1]   Go Up
« previous next »