« previous next »
Pages: 1 2 3 [4] 5 6 ... 10   Go Down

Author Topic: "Mile High" CB350 Four project  (Read 32534 times)

0 Members and 1 Guest are viewing this topic.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: "Mile High" CB350 Four project
« Reply #75 on: October 10, 2016, 04:25:45 PM »
Quote from: Denver_Larry on October 10, 2016, 03:03:21 PM
Don't tell me you sent that thing to the great salvage yard in the sky?!
No she has a home with a younger rider. This old man traded in for a Thruxton R.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline palepainter

  • Hot Shot
  • ***
  • Posts: 546
    • Mike Learn custom paint and airbrush.
Re: "Mile High" CB350 Four project
« Reply #76 on: October 15, 2016, 07:59:47 PM »
I am also in the Denver area.  I was curious who you had do the machine work on the motor in the area?

Thanks,
Mike
Logged

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: "Mile High" CB350 Four project
« Reply #77 on: October 15, 2016, 08:41:59 PM »
Ridge Reamer did the bore, decked the head and cut the valve seats, Hondaman presided over the matter and reassembled the head for me.
Logged
2005 RC51
1973 CB350F...project

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: "Mile High" CB350 Four project
« Reply #78 on: October 29, 2016, 10:26:32 AM »
Anyone know of a place that does small batches of zinc plating?  I've got a handful of screws etc that need a refresh that I can't find replacements for anywhere..
Logged
2005 RC51
1973 CB350F...project

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: "Mile High" CB350 Four project
« Reply #79 on: October 29, 2016, 10:26:58 AM »
Or cadmium..
Logged
2005 RC51
1973 CB350F...project

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,912
  • Bought her new 4/75
Re: "Mile High" CB350 Four project
« Reply #80 on: October 29, 2016, 10:56:39 AM »
I was recently told there is a small chromer in Yuma. Didn't think we still had one in CO.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline NobleHops

  • Don ya be callin' me no
  • Expert
  • ****
  • Posts: 1,345
  • Misfit - Tucson, Arizona
Re: Mile High; CB350 Four project
« Reply #81 on: October 29, 2016, 11:11:10 AM »
Quote from: Denver_Larry on October 29, 2016, 10:26:32 AM
Anyone know of a place that does small batches of zinc plating?  I've got a handful of screws etc that need a refresh that I can't find replacements for anywhere..

Larry if you strike out locally drop them in a box to me. My local guy does good work if I prep it well with the vapor blaster prior, perfectly serviceable for a SOHC. A small batch is something silly like $20, and it's a 10 minute ride to drop them off along with a prepaid box back to you, no big thing. Happy to do that for you.

N.
Logged
Nils Menten * Tucson, Arizona, USA

I have a motorcycle problem.

My build thread: NobleHops makes a 400F pretty for his wife: http://forums.sohc4.net/index.php?topic=131210.0

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: "Mile High" CB350 Four project
« Reply #82 on: October 29, 2016, 12:15:37 PM »
Thanks noble, I'll get everything together for one batch!
Logged
2005 RC51
1973 CB350F...project

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: "Mile High" CB350 Four project
« Reply #83 on: October 29, 2016, 02:01:26 PM »
Ok, so maybe I've gone a little too far prettying up the starter motor...
Logged
2005 RC51
1973 CB350F...project

Offline CBJoe

  • Master
  • *****
  • Posts: 1,975
Re: "Mile High" CB350 Four project
« Reply #84 on: October 29, 2016, 03:18:06 PM »
Quote from: Denver_Larry on October 29, 2016, 02:01:26 PM
Ok, so maybe I've gone a little too far prettying up the starter motor...


I think that's the cleanest starter I've ever seen ;D
Logged
'07 Bonneville Black
'15 Moto Guzzi California 1400
CB750K2 Hot Rod Revival http://forums.sohc4.net/index.php/topic,171693.0.html
'65 CB77
'66 CM91 (C90'ish)

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,144
  • I love to restore & travel. Keep'em Going Strong !
Re: "Mile High" CB350 Four project
« Reply #85 on: October 29, 2016, 04:02:31 PM »
Nice work !  8) 8)
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: "Mile High" CB350 Four project
« Reply #86 on: March 07, 2017, 03:04:36 PM »
Finally something to talk about!  After a long break from the action Cliff Meyer worked up some more of his magic and delivered this beauty today:


I won't be able to play with it until this weekend but at least I got to check it out and hold it up against the bike.  My new welder gets here Thursday!
Logged
2005 RC51
1973 CB350F...project

Online calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: "Mile High" CB350 Four project
« Reply #87 on: March 07, 2017, 03:17:27 PM »
Pretty! What new welder did you buy?
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: "Mile High" CB350 Four project
« Reply #88 on: March 07, 2017, 03:27:40 PM »
Miller Syncrowave 210.  Little step up from my little Century wire feed!
Logged
2005 RC51
1973 CB350F...project

Online calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: "Mile High" CB350 Four project
« Reply #89 on: March 07, 2017, 03:44:17 PM »
Nice box! Its a great "shop" unit. Not too portable, but really welds well. I am partial to the Dynasty series, but they're pricey and then some. If my current unit ever dies, I'll be replacing it with a 280DX but the darn thing keeps kicking  >:(
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: "Mile High" CB350 Four project
« Reply #90 on: March 07, 2017, 03:47:33 PM »
Looking great! make sure you get the shock mounting points in the correct spot (if you want to run stock springs.

I built the subframe how I wanted it to 'look' but it ended up not working with stock springs and I scrapped the mounting plates and dual springs and went with a monoshock   :P
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: "Mile High" CB350 Four project
« Reply #91 on: March 07, 2017, 03:56:08 PM »
Quote from: calj737 on March 07, 2017, 03:44:17 PM
Nice box! Its a great "shop" unit. Not too portable, but really welds well. I am partial to the Dynasty series, but they're pricey and then some. If my current unit ever dies, I'll be replacing it with a 280DX but the darn thing keeps kicking  >:(
Hoping to get quite a few good years out of it.  Couldn't justify or afford anything more at the moment!  I was pretty much set on a Diversion 180, but this will let me grow a lot more as I get better I think.  Have you ever dealt with Matheson for gas and wire?  Closest place to me and I need a bottle and some filler to start with.
Logged
2005 RC51
1973 CB350F...project

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: "Mile High" CB350 Four project
« Reply #92 on: March 07, 2017, 04:01:09 PM »
Quote from: BLAC on March 07, 2017, 03:47:33 PM
Looking great! make sure you get the shock mounting points in the correct spot (if you want to run stock springs.

I built the subframe how I wanted it to 'look' but it ended up not working with stock springs and I scrapped the mounting plates and dual springs and went with a monoshock   :P
Thanks, although I can't really take any credit for the hoop and cowl! Lol!

Not planning on running the stock shocks, but I'll certainly be as careful as possible measuring and replicating the stock mounting locations.
Logged
2005 RC51
1973 CB350F...project

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: "Mile High" CB350 Four project
« Reply #93 on: March 07, 2017, 04:16:56 PM »
Cliff does some great sheet metal fab.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Online calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: "Mile High" CB350 Four project
« Reply #94 on: March 07, 2017, 04:50:01 PM »
No, I'm not local to you. I do buy consumables and stuff from weldingsuppliesfromioc.com. They have great prices, knowledgeable folks, and fast shipping.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
"Mile High" CB350 Four project
« Reply #95 on: March 07, 2017, 05:29:09 PM »
They're national, that's why I asked.  IOC is where I just bought my new rig from.
Logged
2005 RC51
1973 CB350F...project

Offline palepainter

  • Hot Shot
  • ***
  • Posts: 546
    • Mike Learn custom paint and airbrush.
Re: "Mile High" CB350 Four project
« Reply #96 on: March 07, 2017, 07:47:18 PM »
That tail section really looks sweet.  Almost too nice to paint.   :)
Logged

Offline JDP12

  • Full Member
  • *
  • Posts: 18
Re: "Mile High" CB350 Four project
« Reply #97 on: March 07, 2017, 08:10:12 PM »
Never thought I would say a starter is gorgeous, until now.  Wow man great job.
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: "Mile High" CB350 Four project
« Reply #98 on: March 07, 2017, 10:06:40 PM »
Quote from: palepainter on March 07, 2017, 07:47:18 PM
That tail section really looks sweet.  Almost too nice to paint.   :)

And that's coming from a painter.

I agree.  Maybe brush the finish and clear it, or at least show some of it off.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Online calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: "Mile High" CB350 Four project
« Reply #99 on: March 08, 2017, 03:22:13 AM »
Quote from: CB750 Cafe Racer Fan on March 07, 2017, 10:06:40 PM
I agree.  Maybe brush the finish and clear it, or at least show some of it off.
Use ScotchBrite, brush in a single direction, cover with Flood Penetrol. Run it that way for a while. You can always paint it later.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis
Pages: 1 2 3 [4] 5 6 ... 10   Go Up
« previous next »