« previous next »
Pages: [1]   Go Down

Author Topic: Fork Seal Driver for CB400F  (Read 1246 times)

0 Members and 1 Guest are viewing this topic.

Offline Bristledisk

  • Enthusiast
  • **
  • Posts: 118
Fork Seal Driver for CB400F
« on: November 11, 2015, 10:42:58 AM »
What is the correct size fork seal driver for my CB400F? The Shop Manual states tool No. 07054-33301
Logged
1977 CB400F, 1976 CB750F1, 1974 CB550K, 1975 CB550K, 1976 CB550K2, 1973 CB350F

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,489
Re: Fork Seal Driver for CB400F
« Reply #1 on: November 11, 2015, 12:09:37 PM »
You can buy a seal driver kit fairly cheaply,it will have something you can use
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Fork Seal Driver for CB400F
« Reply #2 on: November 13, 2015, 04:51:12 PM »
Why get a special tool for something you're going to use once every couple of decades? I stated in another thread if you have 35mm forks, a piece of 1 1/2" abs pipe works perfect. Just cut the end square and you're gold. Spend the money on something important like carb kits or tune up parts.
Logged
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline Redline it

  • Hot Shot
  • ***
  • Posts: 561
  • thread killer
Re: Fork Seal Driver for CB400F
« Reply #3 on: November 14, 2015, 09:46:06 AM »
I've always just used a socket. 
Logged

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Fork Seal Driver for CB400F
« Reply #4 on: November 14, 2015, 10:01:34 AM »
Get a PVC adapter from the hardware store or Home Depot and just tap it down.
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline CycleRanger

  • No comment about being an
  • Really Old Timer ...
  • *******
  • Posts: 5,449
  • Central Texas Shop Manual Advocate
Re: Fork Seal Driver for CB400F
« Reply #5 on: November 14, 2015, 11:09:53 AM »
Quote from: BobbyR on November 14, 2015, 10:01:34 AM
Get a PVC adapter from the hardware store or Home Depot and just tap it down.

^^
This!
Works for seals, bearings, etc.
Logged
Do you have a copy of the Honda Shop Manual or Parts List for your bike? Get one here:
https://www.honda4fun.com/materiale/documentazione-tecnica
CB750K5        '79 XL250s     CL350K3
CB750K3        '76 XS650      '76 CJ360T

Offline Redline it

  • Hot Shot
  • ***
  • Posts: 561
  • thread killer
Re: Fork Seal Driver for CB400F
« Reply #6 on: November 14, 2015, 08:47:58 PM »
sockets already come pre cut and square,
Logged

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Fork Seal Driver for CB400F
« Reply #7 on: November 14, 2015, 09:16:24 PM »
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?
Pages: [1]   Go Up
« previous next »