Author Topic: Cobra motor disassembly and rebuild (Read 107690 times)

gschuld · « **Reply #325 on:** April 29, 2016, 01:49:30 PM »

Gotta keep you in line....

George

BPellerine · « **Reply #326 on:** April 29, 2016, 05:16:08 PM »

Quote from: Bill/BentON Racing on April 28, 2016, 08:18:31 PM

LMAO, about what I expected, lol! You go Frank! K. I have a plan....hehe! You got mo work! Coming your way! Bill

well it sure looks interesting!billp

Bill/BentON Racing · « **Reply #327 on:** April 30, 2016, 03:04:30 PM »

Copper on top and bottom, both Cometic, I recommend, that base gasket is a work of art! Show em George and thanks again for the overnighter and Saturday delivery! Bill

Medyo Bastos · « **Reply #328 on:** April 30, 2016, 03:42:05 PM »

thickness on those orange gaskets? i need a set of both. yes, it is a work of art. never seen one done like that.

Bill/BentON Racing · « **Reply #329 on:** April 30, 2016, 05:06:28 PM »

.020 base, .050 head

gschuld · « **Reply #330 on:** April 30, 2016, 06:54:50 PM »

Medyo,

They are made to order Cometic copper gaskets, ordered through Dynoman. Typical delivery time is about a week or less. Cometic ships directly to buyer. I've ordered Cometic copper gaskets from Dynoman 3 times in the last 2 months(I keep "losing" mine

) and got them fast every time.

Just send Buzz an email with what you want and what thickness for each, and he will send you an invoice by email. PayPal the amount given, and the order is in right away. Easy.

George

Medyo Bastos · « **Reply #331 on:** April 30, 2016, 08:00:45 PM »

real cool

Bill/BentON Racing · « **Reply #332 on:** May 03, 2016, 08:43:51 PM »

Hehe, stiffer and lower!

dragracer · « **Reply #333 on:** May 03, 2016, 09:23:20 PM »

You're getting there Bill. The small details are what'll get you the numbers you desire. Then its going to be about seat time. Lots of seat time.

Bill/BentON Racing · « **Reply #334 on:** May 03, 2016, 11:03:17 PM »

Yes sir, you right as usual! Lol

gschuld · « **Reply #335 on:** May 04, 2016, 07:10:05 AM »

That's quite a command center you got there Billy...

Anti old school, but useful I'm sure.

George

dragracer · « **Reply #336 on:** May 04, 2016, 02:03:59 PM »

Quote from: gschuld on May 04, 2016, 07:10:05 AM

That's quite a command center you got there Billy... Anti old school, but useful I'm sure.

George

I don't think Larry( Spiderman) McBride has that many gadgets on his top fuel bike. Wow. I guess that's what it takes to go fast.

Bill/BentON Racing · « **Reply #337 on:** May 04, 2016, 02:30:29 PM »

LMAO, I did think sumpin I won't print! I ain't done yet! SMH.

gschuld · « **Reply #338 on:** May 04, 2016, 02:53:55 PM »

Your bike even tells time....

.

Is there an alarm clock function? You can use it to wake yourself up in the morning(running and ducking)

George

Bill/BentON Racing · « **Reply #339 on:** May 06, 2016, 01:58:52 PM »

Where I left off last night.

dragracer · « **Reply #340 on:** May 06, 2016, 04:21:18 PM »

Keep working Bill. It'll be less on your mind come race day. Distractions affect our performance so we need clear minds when going for the win. Racing is 99% mental.

gschuld · « **Reply #341 on:** May 06, 2016, 04:45:11 PM »

Quote from: dragracer on May 06, 2016, 04:21:18 PM

Racing is 99% mental.

That's convenient, lots of people think I'm totally mental.

George

Jerry Rxman Griffin aka MuthaF'er · « **Reply #342 on:** May 06, 2016, 05:49:14 PM »

Quote from: gschuld on May 04, 2016, 02:53:55 PM

Your bike even tells time.... .

Is there an alarm clock function? You can use it to wake yourself up in the morning(running and ducking)

George

#$%* George, Bill doesn't sleep!

Bill/BentON Racing · « **Reply #343 on:** May 07, 2016, 11:58:14 AM »

As y'all probably know, Rick Stetson does a lot of machining work on my stuff through Mike Rieck. Wow, just found out, he invented the 2 step, way cool. Smart, talented man he is!
Way to go Rick !!!!, Bill

Bill/BentON Racing · « **Reply #344 on:** May 08, 2016, 06:13:23 PM »

Lighter, lower, leaner, meaner, cleaner, thanks to Frank who always kept after me to build a purpose built dragbike. Well, Frank, here you go, hope it runs as well as your's! Thanks for the advice and help, thanks to all who have helped. Grips and mount new front fender, oh and c/guard and we ready to go racing! Yippee Kai Yeah, Bill
It's so low, 2.5 inches, maybe 3/4, I can sit on it on the lift and put my feet flat footed on the floor! K.

MRieck · « **Reply #345 on:** May 08, 2016, 07:28:26 PM »

I don't think you need the oil temp and voltage gauges Bill seeing how you are taking all non necessary stuff off. How hot can the oil get and how much voltage drop can there be 1/4 mile at a time? Seriously....just invites an electrical problem.

754 · « **Reply #346 on:** May 08, 2016, 07:44:51 PM »

Is that stock dash functional ? looking at the red bolts holding it.. I know where the Billy Bling came from..

calj737 · « **Reply #347 on:** May 08, 2016, 07:47:00 PM »

Quote from: 754 on May 08, 2016, 07:44:51 PM

looking at the red bolts holding it.. I know where the Billy Bling came from..

Forest for the trees, Frank

dragracer · « **Reply #348 on:** May 08, 2016, 10:03:45 PM »

Glad to see you've lowered it and have a stiffer frontend. More items checked off a long list to the path of racing success.

Word of caution, right hand turns will now be much more tricky. That pipe WILL get scrapped up no matter how slow you make right hand turns. Valdosta and Rockingham have right side turn offs to the return road so be cautious. Memphis isn't an issue since you will lean right through the sweeping portion of their road course on the way to the ticket both.

Guys, as much as it pains us to see the bling and unnecessary items on Bill's bike, I say: Get used to it cause in all likelihood, he's not taking any of that excess baggage off in my opinion.

MRieck · « **Reply #349 on:** May 09, 2016, 04:30:14 AM »

Quote from: dragracer on May 08, 2016, 10:03:45 PM

Glad to see you've lowered it and have a stiffer frontend. More items checked off a long list to the path of racing success.

Word of caution, right hand turns will now be much more tricky. That pipe WILL get scrapped up no matter how slow you make right hand turns. Valdosta and Rockingham have right side turn offs to the return road so be cautious. Memphis isn't an issue since you will lean right through the sweeping portion of their road course on the way to the ticket both.

Guys, as much as it pains us to see the bling and unnecessary items on Bill's bike, I say: Get used to it cause in all likelihood, he's not taking any of that excess baggage off in my opinion.

Hope springs eternal Frank.

News:

Author Topic: Cobra motor disassembly and rebuild (Read 107690 times)