« previous next »
Pages: 1 [2] 3 4 ... 15   Go Down

Author Topic: Bimota HB1 Clone build  (Read 68102 times)

0 Members and 3 Guests are viewing this topic.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,562
  • Big ideas....
Re: Bimota HB1 Clone build
« Reply #25 on: February 22, 2016, 06:16:03 PM »
Quote from: Artracing on February 21, 2016, 08:26:18 AM
Quote from: MRieck on February 21, 2016, 07:18:51 AM
How did you fellas manufacture that oil reservoir which mounts in the filter position?

Mike, You hit on the one thing that I can not do at this time. It would be pretty costly , but it's on the drawing table.
I would prefer to build the bike first to engineer it.

Rob
Boy I believe that! ;D Casting it or making sections from billet would/will be a very time consuming and costly I figure. Page 86 and 87 of the book  "Bimota 25 Years of Excelence" have decent pics of the unit.....it's pretty massive. Sold for 280,000 Lire in 74/75. About 160.00 40 years ago. I'm sure Bimota has a couple of spares on hand. ;) ;D ;D
Logged
Owner of the "Million Dollar CB"

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Bimota HB1 Clone build
« Reply #26 on: February 22, 2016, 06:59:10 PM »
Quote from: Artracing on February 22, 2016, 01:52:21 PM
Here we have the Dual Brembo F08 installed to CB750 front hub. Does require wider triple tree.

Rob

that is a lot of leverage from caliper to mount, may need to tie into the fender mount..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #27 on: February 23, 2016, 05:37:39 PM »
Quote from: MRieck on February 22, 2016, 06:16:03 PM
Quote from: Artracing on February 21, 2016, 08:26:18 AM
Quote from: MRieck on February 21, 2016, 07:18:51 AM
How did you fellas manufacture that oil reservoir which mounts in the filter position?

Mike, You hit on the one thing that I can not do at this time. It would be pretty costly , but it's on the drawing table.
I would prefer to build the bike first to engineer it.

Rob
Boy I believe that! ;D Casting it or making sections from billet would/will be a very time consuming and costly I figure. Page 86 and 87 of the book  "Bimota 25 Years of Excelence" have decent pics of the unit.....it's pretty massive. Sold for 280,000 Lire in 74/75. About 160.00 40 years ago. I'm sure Bimota has a couple of spares on hand. ;) ;D ;D

I would love to get my hands on one. Ill have to get that book.
Thanks for the heads up.
Logged

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #28 on: February 23, 2016, 05:41:56 PM »
Quote from: 754 on February 22, 2016, 06:59:10 PM
Quote from: Artracing on February 22, 2016, 01:52:21 PM
Here we have the Dual Brembo F08 installed to CB750 front hub. Does require wider triple tree.

Rob

that is a lot of leverage from caliper to mount, may need to tie into the fender mount..

Here is the front end with carbon fiber fender. I made  a set of beefy triple clamps. They are only 35mm thick  and could make a thicker triple.
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,309
  • Central Texas
Re: Bimota HB1 Clone build
« Reply #29 on: February 23, 2016, 06:02:01 PM »
Quote from: Artracing on February 23, 2016, 05:37:39 PM
Quote from: MRieck on February 22, 2016, 06:16:03 PM
Quote from: Artracing on February 21, 2016, 08:26:18 AM
Quote from: MRieck on February 21, 2016, 07:18:51 AM
How did you fellas manufacture that oil reservoir which mounts in the filter position?

Mike, You hit on the one thing that I can not do at this time. It would be pretty costly , but it's on the drawing table.
I would prefer to build the bike first to engineer it.

Rob
Boy I believe that! ;D Casting it or making sections from billet would/will be a very time consuming and costly I figure. Page 86 and 87 of the book  "Bimota 25 Years of Excelence" have decent pics of the unit.....it's pretty massive. Sold for 280,000 Lire in 74/75. About 160.00 40 years ago. I'm sure Bimota has a couple of spares on hand. ;) ;D ;D

Ill have to get that book.



Here ya go....


http://www.amazon.com/gp/offer-listing/8879111981/ref=tmm_other_meta_binding_used_olp_sr?ie=UTF8&condition=used&qid=&sr=
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #30 on: February 23, 2016, 06:25:14 PM »
Quote from: Stev-o on February 23, 2016, 06:02:01 PM
Quote from: Artracing on February 23, 2016, 05:37:39 PM
Quote from: MRieck on February 22, 2016, 06:16:03 PM
Quote from: Artracing on February 21, 2016, 08:26:18 AM
Quote from: MRieck on February 21, 2016, 07:18:51 AM
How did you fellas manufacture that oil reservoir which mounts in the filter position?

Mike, You hit on the one thing that I can not do at this time. It would be pretty costly , but it's on the drawing table.
I would prefer to build the bike first to engineer it.

Rob
Boy I believe that! ;D Casting it or making sections from billet would/will be a very time consuming and costly I figure. Page 86 and 87 of the book  "Bimota 25 Years of Excelence" have decent pics of the unit.....it's pretty massive. Sold for 280,000 Lire in 74/75. About 160.00 40 years ago. I'm sure Bimota has a couple of spares on hand. ;) ;D ;D

Ill have to get that book.



Here ya go....


http://www.amazon.com/gp/offer-listing/8879111981/ref=tmm_other_meta_binding_used_olp_sr?ie=UTF8&condition=used&qid=&sr=

Wow, thanks for that, I'll have to put that in the oil tank budget. Pricey little thing.
Logged

Offline sbeckman7

  • Glutton For Punishment And/Or
  • Hot Shot
  • ***
  • Posts: 304
  • Slow and steady
Re: Bimota HB1 Clone build
« Reply #31 on: February 23, 2016, 10:38:00 PM »
This is incredible work.  I just learned about the HB1 today!  Looking forward to the build :)  Tell me you're keeping the carbon work visible?
Logged

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #32 on: February 24, 2016, 04:13:24 AM »
Quote from: sbeckman7 on February 23, 2016, 10:38:00 PM
This is incredible work.  I just learned about the HB1 today!  Looking forward to the build :)  Tell me you're keeping the carbon work visible?

I was wondering when someone was going to ask. I'll build the bike with carbon unpainted and then, as I bite my knuckles, paint to original. I will have plenty of photos. Unless I have overwhelming response I'll eventually paint.
Logged

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #33 on: February 24, 2016, 04:42:34 PM »
I got these custom made out of Japan for the HB1. I still don't how they rolled it and bent the curve.


Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Bimota HB1 Clone build
« Reply #34 on: February 24, 2016, 04:51:38 PM »
Quote from: Artracing on February 24, 2016, 04:42:34 PM
I got these custom made out of Japan for the HB1. I still don't how they rolled it and bent the curve.

Pretty!  ;D
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: Bimota HB1 Clone build
« Reply #35 on: February 24, 2016, 06:14:14 PM »
Now those are very sexy.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Bimota HB1 Clone build
« Reply #36 on: February 24, 2016, 07:05:02 PM »
 nice maybe explosion formed..... how much......
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,033
  • I refuse...
Re: Bimota HB1 Clone build
« Reply #37 on: February 25, 2016, 01:54:55 AM »
Quote from: bwaller on February 24, 2016, 06:14:14 PM
Now those are very sexy.
Get out of my head, Brent!!!!

I think I just broke a Commandment  :-[
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: Bimota HB1 Clone build
« Reply #38 on: February 25, 2016, 04:07:15 AM »
Ah, live a little Cal!
Logged

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #39 on: February 25, 2016, 04:25:16 AM »
Quote from: 754 on February 24, 2016, 07:05:02 PM
nice maybe explosion formed..... how much......

With no silencer inserts. Just the shell.$600 for the set
I was planning to make some similar myself.
Saw the price and couldn't pass them up.
Logged

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,362
Re: Bimota HB1 Clone build
« Reply #40 on: February 25, 2016, 08:43:48 AM »
Got a link to the megga bodies? Those would be pure sex on my Rickman redo. I have been kicking around using a RC 4-1 but the extra weight of that much sex is worth it.
Logged
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline sbeckman7

  • Glutton For Punishment And/Or
  • Hot Shot
  • ***
  • Posts: 304
  • Slow and steady
Re: Bimota HB1 Clone build
« Reply #41 on: February 25, 2016, 10:51:57 AM »
That seems like an awesome price for 4 totally custom-made silencer bodies.  And they look amazing.  I understand with the carbon paint choice, but oh it will be a sad day!!
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,033
  • I refuse...
Re: Bimota HB1 Clone build
« Reply #42 on: February 25, 2016, 12:53:23 PM »
Quote from: bwaller on February 25, 2016, 04:07:15 AM
Ah, live a little Cal!
I will be living in sin for coveting those beauties. That's among the nicest and best executed custom pieces I've seen. Love this bike!
« Last Edit: February 25, 2016, 03:17:10 PM by calj737 »
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #43 on: February 25, 2016, 01:32:50 PM »
I was originally going with Ceriani style Triple Clamps, but needed a wider set, because of the Brembo calipers needed more room.
So I machined these up, but added the adjustable offset bushing. 45mm Offset with 2.5mm and 5mm offset bushing for 40-50mm range.



Logged

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,763
Re: Bimota HB1 Clone build
« Reply #44 on: February 25, 2016, 03:16:40 PM »
Sounds like a cool project!
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Bimota HB1 Clone build
« Reply #45 on: February 25, 2016, 07:08:29 PM »
Quote from: Artracing on February 25, 2016, 01:32:50 PM
I was originally going with Ceriani style Triple Clamps, but needed a wider set, because of the Brembo calipers needed more room.
So I machined these up, but added the adjustable offset bushing. 45mm Offset with 2.5mm and 5mm offset bushing for 40-50mm range.

So are you machining spacers for the hub to calipers to accommodate for the wider fork spacing?
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Bootsey

  • Hot Shot
  • ***
  • Posts: 383
Re: Bimota HB1 Clone build
« Reply #46 on: February 25, 2016, 08:39:49 PM »
Following- looks like the makings of an awesome build.
Logged

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: Bimota HB1 Clone build
« Reply #47 on: February 26, 2016, 07:44:44 AM »
#$%*e Art, very cool work. Will you be my daddy?
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Bimota HB1 Clone build
« Reply #48 on: February 26, 2016, 03:00:22 PM »
Quote from: bwaller on February 26, 2016, 07:44:44 AM
#$%*e Art, very cool work. Will you be my daddy?

That sounded seriously kinky Brent, who's your Daddy.... ;D ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,033
  • I refuse...
Re: Bimota HB1 Clone build
« Reply #49 on: February 26, 2016, 03:00:57 PM »
Quote from: Retro Rocket on February 26, 2016, 03:00:22 PM

That sounded seriously kinky Brent, who's yer Daddy.... ;D ;)
FTFY
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis
Pages: 1 [2] 3 4 ... 15   Go Up
« previous next »