« previous next »
Pages: 1 ... 3 4 [5] 6 7 ... 15   Go Down

Author Topic: Bimota HB1 Clone build  (Read 69213 times)

0 Members and 2 Guests are viewing this topic.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Bimota HB1 Clone build
« Reply #100 on: April 02, 2016, 03:07:12 PM »
Quote from: Artracing on April 02, 2016, 09:38:20 AM
Quote from: Retro Rocket on March 31, 2016, 05:12:01 PM
Very nice, can't wait to see the frame... ;)

Thanks for the link in the Brembo thread about the Airtech oil tank inner fender. I saw that and am considering it. Let say it is on the table.


Rob

No problem... ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #101 on: April 02, 2016, 04:10:14 PM »
Needle bearings in swing arm.
Logged

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #102 on: April 02, 2016, 04:25:44 PM »
Quote from: FunJimmy on April 02, 2016, 12:49:46 PM
Quote from: Artracing on April 02, 2016, 10:24:54 AM
Made a few iconic swing arm frame mounts.  No fun machining 4130. These are the pieces built into the frame as sort of a socket for swing arm to fit into. The swing arm uses two bolts instead of one long axle. The bolt is custom, like a shoulder bolt with disc on the end with holes to match the frame mount. The  cluster of holes in the frame mounts are threaded. The bolt disc fits into the socket and then screwed in. You then attach the nut on the inside to secure the swing arm
It is quite the elaborate design. I have no idea why it was done this way.
Much better way to do it, but this build is all about cloning.

I guess that commits you to building the correct oil tank, Eh!

 

HAHA, I have to brush up on castings 101 first.

Actually, the proto type HB1 didn't have the front oil tank. He actually put the tank at the  rear of engine under the swing arm in pivot in front of the rear wheel. That is something I have pondered. 
Still I'm thinking stealth inner fender oil tank. There is one on this forum that is exactly what I was thinking.
Logged

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #103 on: April 04, 2016, 06:54:57 PM »
Knocked out a pair of mounts for rear sets. Out of respect, I'm using  Italian made Tarozzi rear set.

 
Logged

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #104 on: April 11, 2016, 04:40:21 AM »
Here is photo of real HB1 frame.
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Bimota HB1 Clone build
« Reply #105 on: April 11, 2016, 02:55:38 PM »
The only thing I don't like about the HB1 frame is, the rear tube coming from the swingarm pivot up to the rear shock mount, I would bring that forward so I could run a more modern shock angle..
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #106 on: April 16, 2016, 10:14:19 AM »
Rear Brembo caliper  hanger complete
Logged

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,362
Re: Bimota HB1 Clone build
« Reply #107 on: April 16, 2016, 01:41:32 PM »
Looking very tidy. Well done.
Logged
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Bimota HB1 Clone build
« Reply #108 on: April 16, 2016, 03:20:11 PM »
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #109 on: April 16, 2016, 04:37:34 PM »
Engine complete.  Nothing special. Megacycle cam and electronic ignition.
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: Bimota HB1 Clone build
« Reply #110 on: April 16, 2016, 09:27:34 PM »
The motor looks very tidy and I like that rear caliper hanger!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #111 on: April 17, 2016, 10:59:10 AM »
Quote from: CB750 Cafe Racer Fan on April 16, 2016, 09:27:34 PM
The motor looks very tidy and I like that rear caliper hanger!

Thank you. I hope it runs. The hanger is simple but functional.
Logged

Offline simon#42

  • Old Timer
  • ******
  • Posts: 2,629
  • liverpool
Re: Bimota HB1 Clone build
« Reply #112 on: April 21, 2016, 01:08:02 PM »
some nice work going on here .
Logged

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #113 on: June 27, 2016, 07:19:19 PM »
I'm back. It's been busy.
Frame to be completed next week.
Here some eye candy


Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Bimota HB1 Clone build
« Reply #114 on: June 27, 2016, 07:45:30 PM »
Looking good Art... ;)  If you need someone to test it.... ;D ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: Bimota HB1 Clone build
« Reply #115 on: June 27, 2016, 08:44:03 PM »
Art,

The frame is coming along nicely.  Enjoying following this build.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #116 on: July 07, 2016, 02:38:03 AM »
Now the fun starts
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Bimota HB1 Clone build
« Reply #117 on: July 07, 2016, 03:24:28 AM »
Curious if you have a weight of the frame, and the swing arm?
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #118 on: July 07, 2016, 03:35:47 AM »
Something I need to work on.
It's heavy 36lbs
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Bimota HB1 Clone build
« Reply #119 on: July 07, 2016, 03:56:44 AM »
May I ask, what tubing spec did you use for the frame and for the swing arm? Curious as to there the weight came from is why I ask-
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: Bimota HB1 Clone build
« Reply #120 on: July 07, 2016, 02:06:16 PM »
The frame looks pretty good.  If you used chrome-moly, I'm surprised it's not lighter.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #121 on: July 07, 2016, 03:17:11 PM »
Chromo Moly
Most of the weight is in the swing arm. Need to
Trim the fat
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: Bimota HB1 Clone build
« Reply #122 on: July 07, 2016, 04:22:23 PM »
Quote from: Artracing on July 07, 2016, 03:17:11 PM
Chromo Moly
Most of the weight is in the swing arm. Need to
Trim the fat

Is the swingarm mild steel?
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Artracing

  • Enthusiast
  • **
  • Posts: 169
Re: Bimota HB1 Clone build
« Reply #123 on: July 07, 2016, 04:33:11 PM »
It's all moly.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Bimota HB1 Clone build
« Reply #124 on: July 07, 2016, 10:17:26 PM »
I suspect may still be lighter than stock.
 What really matters. Is what are you gaining, and in that respect, even heavier (or more reliable ), is still worth it..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way
Pages: 1 ... 3 4 [5] 6 7 ... 15   Go Up
« previous next »