Topic: OEM t/y connector barb

[ChopSticks]

For tanks with one petcock outlet was there ever an OEM t/y connector/barb to split the fuel to the two fuel hoses of the carbs? Can't seem to find the OEM part number anywhere

[mystic_1]

Looks like the F models used 16235-657-000, Joint, Fuel.



mystic_1

[ChopSticks]

Thanks so much! Exactly what I was looking for!

[mystic_1]

I've also successfully used brass 1/4" tees from the hardware or auto parts store.  Cheaper and easier to find.





mystic_1

[ChopSticks]

only wish that was the case around here, tried two home depots and two local hardware stores to no avail. smallest I found was a 1/4 connector (female) and had to get 3 individual 3/16-1/4 straight barbs (~$15) to fit in each one which I felt was a bit ridiculous

[RevDoc]

only wish that was the case around here, tried two home depots and two local hardware stores to no avail. smallest I found was a 1/4 connector (female) and had to get 3 individual 3/16-1/4 straight barbs (~$15) to fit in each one which I felt was a bit ridiculous

You don't show on your profile where "around here" is but, I've never had a problem locating brass fittings like that in Home Depot or Lowes. If not in plumbing look where tubing and fittings  for refrigerator ice maker/cold water supply are. Also readily found in auto parts stores.

[ChopSticks]

I'm in NYC so our hardware stores are not as big/extensive as outside the city

[dusterdude]

Local auto parts store,ask for motormite,they make that tee