« previous next »
Pages: [1]   Go Down

Author Topic: Front brake switch wiring CB 750.  (Read 814 times)

0 Members and 1 Guest are viewing this topic.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,046
Front brake switch wiring CB 750.
« on: March 31, 2016, 09:03:58 PM »
The two wire that go to front brake pressure switch on a 74 CB 750;
 Sre they part of main harness or do they have connectors betewwn switch and harness ?
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,106
  • Rhonda the Basket Case
Re: Front brake switch wiring CB 750.
« Reply #1 on: April 01, 2016, 05:38:05 AM »
far as I can tell on mine they are part of the harness.

I just changed to a banjo-bolt switch//
Logged
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

DH

  • Guest
Re: Front brake switch wiring CB 750.
« Reply #2 on: April 01, 2016, 02:27:39 PM »
The last thing to branch out of the front main harness, vicinity of the ign coil area. Black wire and green/yellow wire.
Logged
Pages: [1]   Go Up
« previous next »