Author Topic: Manufactures cup: Valdosta- April 8-10, 2016  (Read 11540 times)

0 Members and 2 Guests are viewing this topic.

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,724
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #75 on: April 14, 2016, 04:17:46 am »
Congratulations to all, we all had big fun. It is 1062cc, stroker crank would be next plateau, I ain't climbed this one yet! Yes to stock advancer, springs are light,  in the process of checking it out. We'll see what we find. We will be in the lanes next to Frank on sumpin. ......cause its just too much fun not to be! K. POP's,  keep up the dialogue,  we all benefit,  even if does sting at times! LMAO.  Who's going be at the Rock, the clown show goes on!  You ain't seen nuttin yet!  May your lights be green and your rounds be wins!  C'mon and play, Bill
These are what's inside it now. ;D Old pic as they came out of the old Cobra motor.
« Last Edit: April 14, 2016, 04:20:36 am by Bill/BentON Racing »
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline Ratbikemike

  • Full Member
  • *
  • Posts: 6
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #76 on: April 14, 2016, 08:00:45 am »
 8).  It was good hanging out in the pits with you guys. Got my eyes out for a sohc, but doubt that i could find a bike and have it sorted out by Rockingham. Will likely ride the st1100 and camp most nights with a motel every few days. The St1100 did nothing wrong all weekend woohoo!!   I, personally, went through major changes in starting line details.....    I will be at all the t&t that i can for a while....that and cruising craigslist for a sohc that needs a good home....   Thank you guys for being around....   Mike

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,079
  • Sunny Central Florida
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #77 on: April 14, 2016, 01:38:03 pm »
8).  It was good hanging out in the pits with you guys. Got my eyes out for a sohc, but doubt that i could find a bike and have it sorted out by Rockingham. Will likely ride the st1100 and camp most nights with a motel every few days. The St1100 did nothing wrong all weekend woohoo!!   I, personally, went through major changes in starting line details.....    I will be at all the t&t that i can for a while....that and cruising craigslist for a sohc that needs a good home....   Thank you guys for being around....   Mike

Welcome aboard! We definitely had a good time at Valdosta. Drag racing is a blast!  8)
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,070
  • CB750F Dragbike
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #78 on: April 14, 2016, 04:07:16 pm »
8).  It was good hanging out in the pits with you guys. Got my eyes out for a sohc, but doubt that i could find a bike and have it sorted out by Rockingham. Will likely ride the st1100 and camp most nights with a motel every few days. The St1100 did nothing wrong all weekend woohoo!!   I, personally, went through major changes in starting line details.....    I will be at all the t&t that i can for a while....that and cruising craigslist for a sohc that needs a good home....   Thank you guys for being around....   Mike

Welcome to the " circus". Glad you had a great time and we're looking forward to seeing you at the Rock.

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,724
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #79 on: April 14, 2016, 05:28:09 pm »
Yep,  welcome to the best forum and people ever! Got my 24 volt starter system done. Yes TnT will help, but you did well, congratulations and glad you're on board, Bill
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,079
  • Sunny Central Florida
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #80 on: April 15, 2016, 02:16:40 pm »
PhotoPhil got a nice shot of my front tire reaching for the sky Saturday:




 8)  8)  8)
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,566
  • Gusto mo titi ko?
    • project
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #81 on: April 15, 2016, 02:43:38 pm »
that is a great shot wilbur!  will you be making it out to memphis?

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #82 on: April 15, 2016, 03:32:49 pm »
Nice shot Wilbur.  Sounds like you did very well at Valdosta.  Especially considering you aren't using all the fancy whistles and bells that make consistency easier to attain.  Good for you friend... 8)

George

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 20,960
  • I refuse...
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #83 on: April 15, 2016, 05:25:38 pm »
Take the wallet out of your pants pocket next time; you'll go faster, MoneyBags!  ;D
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,890
  • Bought her new 4/75
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #84 on: April 15, 2016, 05:38:46 pm »
Some extra cc's and experience always help.

What's the ET cutoff for full leathers etc?
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #85 on: April 15, 2016, 05:42:09 pm »
That is a great shot Wilbur. Wish I could have made it.

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,079
  • Sunny Central Florida
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #86 on: April 15, 2016, 05:45:05 pm »
Take the wallet out of your pants pocket next time; you'll go faster, MoneyBags!  ;D

That's not my wallet... I was just happy to be there!  :o  ;)  ;D
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,079
  • Sunny Central Florida
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #87 on: April 15, 2016, 05:47:03 pm »
What's the ET cutoff for full leathers etc?

Faster than 10.99 requires leather pants too. Jacket and pants do not have to fasten together.
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,070
  • CB750F Dragbike
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #88 on: April 15, 2016, 06:45:21 pm »
I found a few pictures from the race and took cell phone screen shots to illustrate two diverse styles of launching a bike. Wilbur leaves sitting almost straight up due to the high handle bars on his bike. His body position lends itself to making the bike easier to wheelie off the line as shown in his post above. Moving your weight as far forward as possible changes the dynamics of weight transfer and inhibits the frontend from rising. Also notice the center of gravity on the stock bike. Very high- not good for dragracing. Look at the rear of the bike- no squat. You need squat on the rear to keep the bike from wheelying but if the frontend is rising up as the forks extend, eventually it'll yank the fronend off the ground in a wheelie. Down track, Wilburs bars make it hard for him to lean over and "tuck in" to cut down on wind resistance. ET is lost but more so MPH is cut as a result.


Okay, now notice my body position on launch. My arms are stretched out in front of me due to the flat drag bars on my bike and my body is leaning forward over the engine. This helps keep the frontend down. Notice my forks are not extended as they've been stiffened and lowered.  Look at the rear of the bike and  you can see the squat to help with proper weight transfer. The rear of the bike is going down but the bike is moving forward and not upward. I leave with my feet on the pegs also to help control the bike and keep me planted on the seat when i leave the line at high rpm.  Because my body is leaning into the wind and down low, the resistance is cut considerably. I'm able to tuck behind the small fairing to create a wind tunnel effect around my body, This helps to lower ET and increase MPH.

In conclusion fellas, get some flat bars and forward Z bars and get your body down as low as possible on launch. This will aid you down track to cut wind resistance resulting automatically in a lower ET and high MPH. 

Just a little something to think about when you decide to get serious about this drag racing game.

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,070
  • CB750F Dragbike
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #89 on: April 15, 2016, 06:53:23 pm »
Nice shot Wilbur.  Sounds like you did very well at Valdosta.  Especially considering you aren't using all the fancy whistles and bells that make consistency easier to attain.  Good for you friend... 8)

George

George,

You are absolutely correct. Wilbur did damn good on sunday. More seat time and some other changes to the bike and i expect great things from Wilbur this season.

Offline POPS 911

  • Expert
  • ****
  • Posts: 926
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #90 on: April 16, 2016, 04:18:03 am »
FAST FRANK: I will make Wilber a tie downs for the front = made many sets and a sewing machine to make parachutes..... soon you might need a chute to stop that SOHC on a short track. If FRANKS forks is still in business pull them out and send them for a hair cut and rebuild = they had years doing that for many drag racers.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,542
  • Big ideas....
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #91 on: April 16, 2016, 05:01:44 am »
FAST FRANK: I will make Wilber a tie downs for the front = made many sets and a sewing machine to make parachutes..... soon you might need a chute to stop that SOHC on a short track. If FRANKS forks is still in business pull them out and send them for a hair cut and rebuild = they had years doing that for many drag racers.
I have been wondering that myself as I (we) need some small OD tubes. Anybody know????
Owner of the "Million Dollar CB"

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,566
  • Gusto mo titi ko?
    • project
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #92 on: April 16, 2016, 05:41:17 am »
yes, franks is still in business

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,542
  • Big ideas....
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #93 on: April 16, 2016, 06:07:22 am »
yes, franks is still in business
Great...thanks. ;)
Owner of the "Million Dollar CB"

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #94 on: April 16, 2016, 10:20:46 am »
 Should be no need to cut down forks with 77/78 triple trees, they can slide up 4 inches... I got a pic around of that...
Sure Wilbur can trim some time but it is a street bike, not a track bike... and lower et means what ? in bracket racing..
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,890
  • Bought her new 4/75
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #95 on: April 16, 2016, 10:27:17 am »
Lower ET means accomplishment and pride, not wins though. Get the most out of what you got. That means consistency = wins.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,070
  • CB750F Dragbike
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #96 on: April 16, 2016, 03:51:37 pm »
Hold up guys, I think you're missing the whole point of the post. It wasn't a direct reflection on Wilbur, I simply used his bike and mine as examples of different styles of bikes. What I was trying to portrait is if a stock street bike, with basic changes can make it easier to launch, thereby allowing the rider to concentrate more on cutting a good light, trying to be consistent in the 60' because your mind isn't clouded by thought of the bike wheeling cause the rpms are to high or bogging cause they're too low.  Racing is a mental sport, take away as many distractions as possible and it increases your chances if winning. A by-product of what I explained in the earlier post is lower ET and higher mph. Using Wilbur specifically, I can tell you from our conversations that he's hooked and his goal is to make rounds. He's not just there to gave fun with the guys at this juncture. The fact that he installed the 836 kit in this engine and is building another motor verifies his seriousness in doing well.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,542
  • Big ideas....
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #97 on: April 16, 2016, 04:19:55 pm »
Hold up guys, I think you're missing the whole point of the post. It wasn't a direct reflection on Wilbur, I simply used his bike and mine as examples of different styles of bikes. What I was trying to portrait is if a stock street bike, with basic changes can make it easier to launch, thereby allowing the rider to concentrate more on cutting a good light, trying to be consistent in the 60' because your mind isn't clouded by thought of the bike wheeling cause the rpms are to high or bogging cause they're too low.  Racing is a mental sport, take away as many distractions as possible and it increases your chances if winning. A by-product of what I explained in the earlier post is lower ET and higher mph. Using Wilbur specifically, I can tell you from our conversations that he's hooked and his goal is to make rounds. He's not just there to gave fun with the guys at this juncture. The fact that he installed the 836 kit in this engine and is building another motor verifies his seriousness in doing well.
That's the way I understood it Frank.....just some helpful advice ;) And you know what....constructive criticism is OK too......I hope we are all adult enough to handle that when it comes around. ;D
« Last Edit: April 16, 2016, 04:23:32 pm by MRieck »
Owner of the "Million Dollar CB"

Offline BPellerine

  • Master
  • *****
  • Posts: 2,222
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #98 on: April 16, 2016, 05:30:09 pm »
PhotoPhil got a nice shot of my front tire reaching for the sky Saturday:




 8)  8)  8)
good shot of a street bike drag racing,shows that it is able to be done by most folks with an interest,on a stock bike.bill
1978 CB 750K ard and webers
another anfob

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,890
  • Bought her new 4/75
Re: Manufactures cup: Valdosta- April 8-10, 2016
« Reply #99 on: April 16, 2016, 05:37:17 pm »
Wilbur is opening the door for all those others that are skeptical about trying. And being successful. Bring em out boys!
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)