Topic: Need longer swingarm bolt and engine mount bolt for rearset brackets. Any ideas?

[palo86]

I have a 75 CB550F and am trying to make the rearset brackets I purchased from Cognito Moto work.  The main problem I'm running into is that the swingarm/engine mount bolts are too short to mount the brackets.

Does anyone know where I can source longer bolts?

Thanks!

Chris

[flyintiger]

McMaster Carr probably has what you need. http://www.mcmaster.com/#standard-cap-screws/=123hilm

[scunny]

don't know if they are what you are after, the 650 bolts are longer, they are used to mount the footpeg mounts.

[palo86]

These are the brackets.

[palo86]

Thanks for the replies guys.  I'll look mcmaster's and the 650 bolts as well.