Author Topic: My First CB 750 and rebuild  (Read 4389 times)

0 Members and 1 Guest are viewing this topic.

Offline royinla1

  • Full Member
  • *
  • Posts: 20
Re: My First CB 750 and rebuild
« Reply #25 on: July 29, 2016, 01:01:00 PM »
Help! I am putting my 78 carbs back together and even though I took good photos of the parts as I worked on removing them, The carb choke lever arm that connects the 2nd and 3rd carbs was bent up and not rotating together when I disassembled it. Can anyone provide me a photo of your choke lever assembled - maybe two or three photos in different positions? I've been going through the carb section and projects but haven't found any good pics yet.
Thanks.

Offline Ericcb750

  • Hot Shot
  • ***
  • Posts: 449
Re: My First CB 750 and rebuild
« Reply #26 on: July 29, 2016, 01:48:01 PM »
Hey Buddy, send me your e-mail or cell and I'll send you some photos. I've re-built those darn carbs many times and provided another member the same exact photos.... That choke linkage can be a REAL PAIN. the key ist that dinky little spring that bends if the wind blows too hard.... Let me know buddy. I have a 78K also and if you need any help... just ask

You're in the right place. There's also a member, flybox and harisuluv (re-builds these professionally) and they are a huge wealth of knowledge on getting these PD's nice and clean.
1978 CB750K
1978 CB750F super sport
2005 Sportster 1208