Topic: spark plug wire replacement on '75 CB750F

[cvs750]

HEY FELLOW RIDERS AND 750 FANATICS. I NEED TO REPLACE THE SPARK PLUG WIRES AND WANT TO KNOW IF THE WIRES JUST PULL DIRECTLY OUT OF THE COILS BECAUSE THERE ARE NO CAPS ON THESE MODELS. THANKS   

[Mikeshonda750F]

The wires are part of the coils and cannot be replaced. Some guys solder on new wires and whatnot.. but I tried a trick on my K6 that worked out well. Take a screw and snap the head of it off. Thread one end into the old wire and the other into the new wire and complete the job with some heatshrink. As long as you use a good conductive material that will bite into the old and new wires, your golden.

[dusterdude]

also,ngk makes real nice plug wire splicers

[cvs750]

The wires are part of the coils and cannot be replaced. Some guys solder on new wires and whatnot.. but I tried a trick on my K6 that worked out well. Take a screw and snap the head of it off. Thread one end into the old wire and the other into the new wire and complete the job with some heatshrink. As long as you use a good conductive material that will bite into the old and new wires, your golden.

Thanks,,  i'll try this first since i've found the NGK wire splicers to be a little on the expensive side. HAVE A GOOD ONE 

[hymodyne]

I did the same thing as mikeshonda with good results.

hym

[cben750f0]

go the plug splicers... J-1 is the part number..peace