« previous next »
Pages: [1]   Go Down

Author Topic: Kick-start spring?  (Read 468 times)

0 Members and 2 Guests are viewing this topic.

Offline separatist

  • Full Member
  • *
  • Posts: 76
Kick-start spring?
« on: June 05, 2016, 11:24:22 AM »
Assembling my crankcase today and can't seem to figure out how the kick-start spring sits. This seems way loose, obviously. Bad spring, or do I have to wrap it full around to pre load it?



Sent from my SM-G900T using Tapatalk

Logged

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,433
Re: Kick-start spring?
« Reply #1 on: June 05, 2016, 11:29:08 AM »
It's not on. See the left on left side of case. Attaches there
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline drumstyx

  • Hot Shot
  • ***
  • Posts: 729
Re: Kick-start spring?
« Reply #2 on: June 05, 2016, 12:09:09 PM »
Hondaman's book says there are several CB750's that have his blood on them because of that spring. As I recall it is indeed quite a bit preloaded. I don't remember where it mounts, but I do have pictures of every linkage during disassembly somewhere....
Logged

Offline separatist

  • Full Member
  • *
  • Posts: 76
Re: Kick-start spring?
« Reply #3 on: June 05, 2016, 12:22:21 PM »
Sorry, but huh? Not sure what you're saying. There's a lip on the spindle that one side attaches to - I'm assuming that right angle on the spring sits on the crankcase where that ledge sticks out?
Logged

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,141
  • Do not cause harm, nor respond to harm with harm.
Re: Kick-start spring?
« Reply #4 on: June 05, 2016, 12:55:49 PM »
I cheated and compressed it in my bench vise, then tied it up using some wire, installed, then snapped and pulled out the wire.

Not sure if this is much help, but the best pic I could find from my old build, this is how it looks assembled

« Last Edit: June 05, 2016, 12:59:34 PM by edwardmorris »
Logged
Pages: [1]   Go Up
« previous next »