Author Topic: RE: cb750 stainless Delkevic Header & ConeEng stainless Megaphone (Read 4462 times)

chewbacca5000 · « **on:** June 21, 2016, 11:55:46 AM »

Stainless Header cost $237
Stainless Muffler $160
Stainless clamp freebie (Thanks Don!)
Total: $397

People have asked me numerous times how I like the Delkevic header, and until now I could not give a good response.

After having mounted it up on the bike I got to say I am quite pleased. The fitment is great which is one of the features I like most. You can buy the full exhaust with the Delkevic muffler for only $100 more.

I opted to go with the reverse shorty cone from cone engineering. Now before my bike was pretty bad ass with the exhaust it had. Now the thing rumbles like a true race bike.

It is loud for sure, but not ear piercing. It was a fairly easy job with a 2 1/2" clamp and a left over saddle bag piece which I used to mount to the rear foot peg. Barley visible.

Here some pics. Video will follow in a week or so.

flybox1 · « **Reply #1 on:** June 21, 2016, 12:12:54 PM »

I see CONE's prices have gone up 60% since bought mine

Looks great chewie!

Tews19 · « **Reply #2 on:** June 21, 2016, 12:17:30 PM »

Man you seriously make this post and tell us it will be a week or so for a video? This is the setup I'm looking to do. Please post sooner?

!!!!

chewbacca5000 · « **Reply #3 on:** June 21, 2016, 12:44:52 PM »

Quote from: flybox1 on June 21, 2016, 12:12:54 PM

I see CONE's prices have gone up 60% since bought mine

Looks great chewie!

Thanks pretty happy with the way it turned out. Having that 2 1/2" stainless clamp / bracket really made the whole thing work. It was originally supposed to be for 400f.

I noticed the prices were a bit higher too. O well. Word gets around.

chewbacca5000 · « **Reply #4 on:** June 21, 2016, 12:48:09 PM »

Sorry got to figure out how to safely ship a 400f engine to Texas.

It is really mean. I noticed that the same exhaust sounds different on two differnt CB750s. I never knew the engine itself makes a difference for the sound made.

It is not just the exhaust. I will try to make two video what is sounds like my souped up cb750 and a normal cb750.'

There is a big difference in overall noise factor.

greenjeans · « **Reply #5 on:** June 21, 2016, 12:57:06 PM »

That is easily one of the best looking frankenstein exhausts I've ever seen. Looks right.

Tews19 · « **Reply #6 on:** June 21, 2016, 01:00:19 PM »

But overall you advise to get the CE over the stock muffler Delkevic sells?

Stev-o · « **Reply #7 on:** June 21, 2016, 03:59:24 PM »

Quote from: chewbacca5000 on June 21, 2016, 12:48:09 PM

Sorry got to figure out how to safely ship a 400f engine to Texas.

Go to landscape dept at the big box store and see if they have any small pallets

chewbacca5000 · « **Reply #8 on:** June 21, 2016, 08:11:31 PM »

Quote from: Tews19 on June 21, 2016, 01:00:19 PM

But overall you advise to get the CE over the stock muffler Delkevic sells?

I like the reverse megaphone myself. For cost and ease of install buy it with the muffler for $100 more. That is a nice clamp with some trick tig welding too.

I saw the muffler on a gs1000 and that looks good too, but not as nice as CE.

flatlander · « **Reply #9 on:** June 21, 2016, 11:04:10 PM »

looks very good. now impatiently awaiting the video!

Mr Freeze · « **Reply #10 on:** June 22, 2016, 07:53:49 AM »

I have been running that same Cone 12" megaphone on a Cycle X Tri Y exhaust for a few years. It definitely sounds great, but I got a inkling to try their 18" Quieter Core muffler and see what that does.

Tews19 · « **Reply #11 on:** June 22, 2016, 09:26:57 AM »

Chewy hate to keep bothering you on the video but today is my BDAY. My wife called me up and said I can get the exhaust for my bday. But if I don't order the offer is off the table since she got my the 74 750 for my bday...No pressure bud

Stev-o · « **Reply #12 on:** June 22, 2016, 07:39:34 PM »

Quote from: Tews19 on June 22, 2016, 09:26:57 AM

Chewy hate to keep bothering you on the video but today is my BDAY. My wife called me up and said I can get the exhaust for my bday. But if I don't order the offer is off the table since she got my the 74 750 for my bday...No pressure bud

Happy BDay Tews! Order it!!

Tews19 · « **Reply #13 on:** June 22, 2016, 07:41:05 PM »

Thanks Stev-o! I did and ordered a new seat

Stev-o · « **Reply #14 on:** June 22, 2016, 08:48:34 PM »

Quote from: Tews19 on June 22, 2016, 07:41:05 PM

Thanks Stev-o! I did and ordered a new seat

You have the best wife!

chewbacca5000 · « **Reply #15 on:** June 23, 2016, 06:59:23 AM »

Forgot to mention that with the 12" reverse shorty mounted I will gain some ground clearance too. I will be able to mount the c-stand stop up higher.

This the exact opposite of a Kerker where you loose clearance due to the C-stand stop.

I normal don't run with the C-stand on, but for those who must or like it something to consider.

flatlander · « **Reply #16 on:** June 23, 2016, 08:25:55 AM »

that's excellent info, thanks. centre stand is very important to me, good to be aware of this option.

luvmy71 · « **Reply #17 on:** June 23, 2016, 08:32:37 AM »

This is the exact type of setup I am looking to put on my 750. Do you have the part number for the reverse shorty cone from Cone engineering you can share?

Thanks.

chewbacca5000 · « **Reply #18 on:** June 23, 2016, 10:12:57 AM »

It is the 2 1/2" cone. I ordered through DCC as the price seemed about the same and was easier to use their website than make the phone call.

luvmy71 · « **Reply #19 on:** June 23, 2016, 10:36:58 AM »

Sorry, but who is DCC? Googled it but only found a circuit board company.

Thanks for your help. Love the system and price seems very reasonable.

CarbonK · « **Reply #20 on:** June 23, 2016, 10:41:50 AM »

Quote from: luvmy71 on June 23, 2016, 10:36:58 AM

Sorry, but who is DCC? Googled it but only found a circuit board company.

Thanks for your help. Love the system and price seems very reasonable.

http://www.dimecitycycles.com

luvmy71 · « **Reply #21 on:** June 23, 2016, 10:42:57 AM »

Thanks Carbon. Love how helpful everyone is on this board!

Dofilus · « **Reply #22 on:** June 24, 2016, 12:55:41 PM »

It can look like this in sweden

Tews19 · « **Reply #23 on:** June 25, 2016, 07:52:00 PM »

No rejetting if you use the entire delkevic set up.

News:

Author Topic: RE: cb750 stainless Delkevic Header & ConeEng stainless Megaphone (Read 4462 times)