« previous next »
Pages: [1]   Go Down

Author Topic: Honda CB360 kick start shaft spares  (Read 416 times)

0 Members and 1 Guest are viewing this topic.

Offline CafeMonkey

  • Full Member
  • *
  • Posts: 1
Honda CB360 kick start shaft spares
« on: June 23, 2016, 05:43:47 AM »
I'm rebuilding the engine on my 74 CB360 and I've lost the Circlip that fits on the end of the kick start shaft.  I've searched the net for a replacement but I can't seem to find the part listed.

Does anyone know where I could buy one?


Sent from my D6603 using Tapatalk

Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: Honda CB360 kick start shaft spares
« Reply #1 on: June 23, 2016, 06:35:30 AM »
http://www.cmsnl.com/honda-cb360g-1974-usa_model1008/partslist/

Might also want to move this over to the Other Bikes page of the forum  ;)
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,508
  • To many bikes-but lookin' for more
Re: Honda CB360 kick start shaft spares
« Reply #2 on: June 23, 2016, 06:39:27 AM »
  Have you tried sourcing one at a good hardware store or a NAPA ?   Local Honda dealer should be able to get that also, see #3 on the fische is 1.50 pounds . Does not look like a rare part.
« Last Edit: June 23, 2016, 06:42:51 AM by ekpent »
Logged
Pages: [1]   Go Up
« previous next »