« previous next »
Pages: [1]   Go Down

Author Topic: CB750k3 carb sync possible?  (Read 1010 times)

0 Members and 2 Guests are viewing this topic.

Offline Jon T

  • Full Member
  • *
  • Posts: 61
CB750k3 carb sync possible?
« on: July 31, 2016, 05:05:52 PM »
I'm about to fire her up and have been thinking about tuning. A have a 4 line vacuum carb sync tool, but I'm not sure if I can use it. Where would I hook the vacuum lines up?
Logged

Offline Jon T

  • Full Member
  • *
  • Posts: 61
Re: CB750k3 carb sync possible?
« Reply #1 on: July 31, 2016, 07:43:39 PM »
After a lot of research I still cannot figure it out. Any and all help is appreciated


Sent from my iPhone using Tapatalk
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: CB750k3 carb sync possible?
« Reply #2 on: July 31, 2016, 08:13:26 PM »
Its all in the honda shop manual, clymer book, or haynes manual.
the honda sjop manual you can download for free from this site.
follow the 3000mi maintenance procedure.  Vacuum sync comes LAST....
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline greenjeans

  • Industrial strengthed dreamer.
  • Old Timer
  • ******
  • Posts: 2,962
  • 1972 CB750K2
Re: CB750k3 carb sync possible?
« Reply #3 on: August 01, 2016, 05:43:42 AM »
little vacuum ports on the outside of the carbs on the side closest to the engine.  little brass bolts with aluminum crush washers.  Looks like a tiny drain screw.   You will need some adapters if your gauges don't have them.
I have some brass tubing I got at the hardware store that I threaded the same as the screws/bolts.
Logged
Yep, I'm the kid that figured out how to put things back together...eventually.

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: CB750k3 carb sync possible?
« Reply #4 on: August 01, 2016, 08:01:28 AM »
  The bike will run if the carbs are a little off if you did a good bench synch. Maybe just not idle as smooth. If you are just starting it up for the first time I would proceed with that and do the synch later. See if you have any other issues first. Also if the engine has been rebuilt I would want to break it in first before I let it sit idling to long and getting hot etc. Read up as much as you can first before you dig into that.
Logged
Pages: [1]   Go Up
« previous next »