Topic: Turbo Hondamatic

[POPS 911]

BILL: What are you doing with that Yellow Turbo Hondamatic = I'm looking for a 10 anything on 1320' as some claim a 750 matic ran 10's but I want to be their to see this rare bike put that number on the board.          400' yea

[Bill/BentON Racing]

Well, it's sitting in the living room,  but I'm working on a big one rt now,  Bottom end is together. Think I'll make it by April/Valdosta. 

[Jerry Rxman Griffin aka MuthaF'er]

Bill, you have too many bikes to ride. Doesn't Pops like to ride autos?!

[MRieck]

I have been lagging on the 750 auto engine. Big problem is other work and than the other one is wanting to make the engine visually nice...the cases looked like sh!t.

[Medyo Bastos]

Well, it's sitting in the living room,  but I'm working on a big one rt now

last time i saw it, it was on the dining room table


...Save a tree, eat a beaver...

[POPS 911]

BILL: To see these old heavy SOHC 750 based Matics would be a joy to my eyes, maybe by FALL 2017 yours will be ready....... only one shift by foot and your in top gear spooling UP.  AND WITH A 10 ANYTHING ON THE BOARDS = YOU BE THE man !

[Bill/BentON Racing]

POP'S,  it's the next one I'm doing. I'm trying. Had to take a little break,  worked from November finals til Memphis shooting for the 10's!  Working tonight on Purple Rain.

[POPS 911]

QUESTION ? : How do you spool up a TURBO HONDAMATIC with out a clutch to leave on ?? Would not the stall lock up pull you thru the lights ? My fix will be a two step as most [ some ] of the ST/ET bikes = BUSA already run a two step and auto shifts ........ another stupid NHRA rule they have, Is not a AIR SHIFTER ran by electronics [ ask Bill about hooking the wires up !!! ] thanks FRANK SEL record setter.

[dragracer]

Pops, I may not hold that record after November if Bill has anything to do with it.

[Medyo Bastos]

Pops, I may not hold that record after November if Bill has anything to do with it.

no pressure, right frankie???


...Save a tree, eat a beaver...

[Jim F]

QUESTION ? : How do you spool up a TURBO HONDAMATIC with out a clutch to leave on ?? Would not the stall lock up pull you thru the lights ? My fix will be a two step as most [ some ] of the ST/ET bikes = BUSA already run a two step and auto shifts ........ another stupid NHRA rule they have, Is not a AIR SHIFTER ran by electronics [ ask Bill about hooking the wires up !!! ] thanks FRANK SEL record setter.

I would leave on at hit of nitrous untill you get the turbo spooled then hold on
I think the highest stall we got with SAMs bike 5500? Stall speed
Just my .000002 cents worth
Jim

[Don R]

 I was thinking Coan has done crace onverters for the 750A's.

[Bill/BentON Racing]

Best stall so far for us , 3500 rpms,  Jon,  6000!

[POPS 911]

JON ? is not a TURBO-MATIC = right   I would think spooling up a TURBO HONDAMATIC would have high RPMS and pull thru the stall.  Turbo-man has built a MATIC that he said blowed the rear tire away on the HIT on the leave, that would be a REAL THRILL then shifting into D [DRIVE ] and maybe spinning again.....

[Bill/BentON Racing]

Well,  we going find out next year.....I'll race Russ Jr ,see who finishes the build first!

[POPS 911]

Russ Jr. lives on the WEST COAST right ?? So you BILL can be the EAST COAST TURBO SOHC 750 HONDAMATIC 10second record holder at MAN CUP in SEL CLASS ?  2017 I'll be there to watch that board light up....