Author Topic: Help with evaluating bike  (Read 1136 times)

0 Members and 1 Guest are viewing this topic.

Offline rocs

  • Hot Shot
  • ***
  • Posts: 468
Help with evaluating bike
« on: September 14, 2016, 09:06:27 AM »
Wanted to know if it was priced right.

The frame plate says 11/1969. It was titled in 1970 (yes, title comes with bike)

It has a wrinkle tank on it. I know its missing a lot to make it an original bike.

The asking price is $3,500

What do you guys think?

Edit: this is not a sandcast.
« Last Edit: September 14, 2016, 09:14:08 AM by rocs »
1975 CB550k's

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,090
  • Sunny Central Florida
Re: Help with evaluating bike
« Reply #1 on: September 14, 2016, 09:16:40 AM »
Waaayyyy overpriced. Have you heard it run? For an incomplete non runner I would not pay more than $800, preferably no more than $500. I could not garner any interest in a complete, running, almost completely stock, well tuned CB750 with new tires/tubes/brakes/battery/chain/sprockets/tune up/seat upholstery/seals/gaskets/clutch/etc. for $3200...
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline harisuluv

  • Master
  • *****
  • Posts: 2,009
Re: Help with evaluating bike
« Reply #2 on: September 14, 2016, 09:23:11 AM »
Yeah that's just a ridiculous price. 

Not only are many pieces missing, but many have been replaced with non K0 parts.  I.E. carbs, airbox, maybe front fender.  Engine fins are damaged.  Might not even be a K0 engine, nevermind the sandcast thing.

Offline rocs

  • Hot Shot
  • ***
  • Posts: 468
Re: Help with evaluating bike
« Reply #3 on: September 14, 2016, 09:26:21 AM »
Perfect. Just what I wante dto hear

Haris, any luck with the CB550 seats? Ill take a basic seat at this point. Just trying to get this project rolling before the winter weather hits.
1975 CB550k's

Offline sweatshirtolympics

  • Enthusiast
  • **
  • Posts: 132
Re: Help with evaluating bike
« Reply #4 on: September 14, 2016, 09:59:21 AM »
I'm with the rest on this, I paid $400 for my K0. But yeah man you know that thing is broken.

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: Help with evaluating bike
« Reply #5 on: September 14, 2016, 10:49:28 AM »
I wouldn't pay any more than $300 for that.


1974 CB450, 2006 CBR1000RR

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,412
  • Dr. Bovinestein iBa#80333
Re: Help with evaluating bike
« Reply #6 on: September 14, 2016, 11:11:26 AM »
But c'mon guys, it'll almost triple in value if you put a $250 brat seat and $30 clubmans on it!  Then you can flip it for 9 grand!  Or trade it for a gsxr!  Think about it!
What an investment opportunity!


Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: Help with evaluating bike
« Reply #7 on: September 14, 2016, 12:02:19 PM »
 Later model oil tank yada yada- I agree with  the rest too much money for whats there.

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Help with evaluating bike
« Reply #8 on: September 14, 2016, 12:58:50 PM »
At that price you will go broke getting it right. You have a lot of expensive pieces missing.
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline SKOL

  • Hot Shot
  • ***
  • Posts: 271
Re: Help with evaluating bike
« Reply #9 on: September 15, 2016, 10:37:26 AM »
I got a complete k6, wasn't running, didn't have original paint. But was the complete bike, for $700.00. It was in about as good of shape, cosmetic wise, as this bike.

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,625
  • Endeavor to persevere
Re: Help with evaluating bike
« Reply #10 on: September 15, 2016, 01:16:16 PM »
Correct me if I'm wrong, but isn't the wrinkle tank worth about $500 by itself?
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,412
  • Dr. Bovinestein iBa#80333
Re: Help with evaluating bike
« Reply #11 on: September 15, 2016, 01:43:37 PM »
Correct me if I'm wrong, but isn't the wrinkle tank worth about $500 by itself?

Only worth that to someone who knows it and absolutely has to have it.

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,625
  • Endeavor to persevere
Re: Help with evaluating bike
« Reply #12 on: September 15, 2016, 01:49:31 PM »
Right, but if you have a sandcast it's the correct tank, and they don't turn up for sale often.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: Help with evaluating bike
« Reply #13 on: September 15, 2016, 03:58:04 PM »
Correct me if I'm wrong, but isn't the wrinkle tank worth about $500 by itself?

Only worth that to someone who knows it and absolutely has to have it.
I have not checked ebay lately but the price of run of the mill wrinkle tanks was lower than in the past due to the fact they are reproducing them now new. Nice original paint ones are probably holding up well in the market.
« Last Edit: September 16, 2016, 02:29:34 PM by ekpent »

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,625
  • Endeavor to persevere
Re: Help with evaluating bike
« Reply #14 on: September 15, 2016, 04:04:29 PM »
I just saw Don's post about his Yamiya wrinkle tank. I didn't know they were reproducing them. That obviously makes a big difference in value, especially for ones like the tank on this bike that doesn't have original paint.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Help with evaluating bike
« Reply #15 on: September 16, 2016, 08:36:36 AM »
Correct me if I'm wrong, but isn't the wrinkle tank worth about $500 by itself?

Only worth that to someone who knows it and absolutely has to have it.
Perfect bike to cafe if you can get it for under a grand.   Make it your own.  Plan to sell the tank to those sandcast guys. 
Net cost for a titled bike $400-600.  Not bad in my book.   
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Help with evaluating bike
« Reply #16 on: September 16, 2016, 09:13:37 AM »
I just saw Don's post about his Yamiya wrinkle tank. I didn't know they were reproducing them. That obviously makes a big difference in value, especially for ones like the tank on this bike that doesn't have original paint.
Wrinkle tanks usually only bring higher dollars if in stock paint, once the emblems are filled and tank repainted, hard to tell what you really have... Thus that is a higher risk and folks pay less anticipating extra bodywork and expense.
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Help with evaluating bike
« Reply #17 on: September 16, 2016, 01:34:44 PM »
Post the serial number, can leave off last two..off the engine..
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way