« previous next »
Pages: [1]   Go Down

Author Topic: Battery ground cable/wire  (Read 673 times)

0 Members and 1 Guest are viewing this topic.

Offline greenjeans

  • Industrial strengthed dreamer.
  • Old Timer
  • ******
  • Posts: 2,962
  • 1972 CB750K2
Battery ground cable/wire
« on: September 22, 2016, 06:58:36 am »
1970 CB750K

relocating battery under tail section.  Is there any reason why I couldn't just weld a bung to the frame closer to the battery ?    Or, is there a reason that it is on one of the motor mount bolts ?   Probably overthinking things.
Logged
Yep, I'm the kid that figured out how to put things back together...eventually.

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case
Re: Battery ground cable/wire
« Reply #1 on: September 22, 2016, 09:20:36 am »
So long as the mount is clean of paint, you'll be OK.


You should also have a harness ground.
Logged
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: Battery ground cable/wire
« Reply #2 on: September 22, 2016, 12:24:11 pm »
I like to clean all ground connections of paint and powdercoat, and use conductive grease on the connector and frame.
Logged
Pages: [1]   Go Up
« previous next »