« previous next »
Pages: [1]   Go Down

Author Topic: Certain smell coming from brike  (Read 2765 times)

0 Members and 1 Guest are viewing this topic.

Offline Dos

  • Expert
  • ****
  • Posts: 826
  • Owner of a cb350f
Certain smell coming from brike
« on: October 12, 2016, 12:06:23 PM »
I have noticed on my Cb350f there's a particular smell coming from my engine. My bike runs rich to keep the engine cooler so normally it smells alittle gassy but there's this smell that sort of smells like burning mixed with plastic. I can't really put my finger on it. The smell comes from the upper end of my engine.

Is this just the smell of heat or a gasket maybe?

My bike does have slight weeping coming from the upper cylinder head
« Last Edit: October 12, 2016, 12:08:16 PM by Dos »
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Certain smell coming from brike
« Reply #1 on: October 12, 2016, 12:51:22 PM »
Quote from: Dos on October 12, 2016, 12:06:23 PM
My bike runs rich to keep the engine cooler
Did you set it this way on purpose?  ???

Tune it the way Honda meant it to be and then see if the smell goes away.
If it doesnt, it could just be crank vapor, or that oil burning off....
Maybe your vreg is working overtime  :o
« Last Edit: October 12, 2016, 12:53:25 PM by flybox1 »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Gene

  • Chat enuf you too can be a
  • Master
  • *****
  • Posts: 2,041
  • One bike is enuf, change my mind
Re: Certain smell coming from brike
« Reply #2 on: October 12, 2016, 02:29:00 PM »
Reset to regular, as Fly says.  I'm chiming in because I have noticed that some bikes smell different than others and you have to get used to them to be able to tell if something's off.  A gasket shouldn't be melting - that would be bad.  If you're smelling plastic my first thought would be electrical - or . . . make sure your plug wires aren't leaning on the head.
Logged
*1973 CB750K3 (Bow)

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,006
  • Saver of unloved motorcycles.
Re: Certain smell coming from brike
« Reply #3 on: October 12, 2016, 04:06:59 PM »
 Aftermarket coils? I've melted a couple of those,
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Gene

  • Chat enuf you too can be a
  • Master
  • *****
  • Posts: 2,041
  • One bike is enuf, change my mind
Re: Certain smell coming from brike
« Reply #4 on: October 12, 2016, 04:49:53 PM »
BTW Dos - I've tried that myself - the rich setting to "keep it cooler" in Summer - or so I thought.  It seems like a reasonable idea, especially for a smaller bike (I did it on my ex-360), scientific reasoning blah blah blah - but it's not.:)
Logged
*1973 CB750K3 (Bow)

Offline Dos

  • Expert
  • ****
  • Posts: 826
  • Owner of a cb350f
Re: Certain smell coming from brike
« Reply #5 on: October 12, 2016, 06:07:05 PM »
I thought it would be better to run it rich to keep it cool. So I shouldn't? Won't the bike get hotter with the air screw out more?


Also what is a vreg? My regulator? The smell is coming from the top ensnared of the engine
« Last Edit: October 12, 2016, 06:09:21 PM by Dos »
Logged

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: Certain smell coming from brike
« Reply #6 on: October 12, 2016, 07:35:13 PM »
The Honda engineers were quite capable. You're aware that the hundreds of thousands of motorcycles sold in the 70's throughout the world didn't overheat, right?
Logged

Offline Gene

  • Chat enuf you too can be a
  • Master
  • *****
  • Posts: 2,041
  • One bike is enuf, change my mind
Re: Certain smell coming from brike
« Reply #7 on: October 12, 2016, 08:04:55 PM »
Quote from: Dos on October 12, 2016, 06:07:05 PM
I thought it would be better to run it rich to keep it cool. So I shouldn't? Won't the bike get hotter with the air screw out more?

No - but I get your logic. "If running lean makes it overheat, wouldn't running rich keep it cooler?"

Again, I get it, thought the same thing.  But the science doesn't support it. 1.5 turns out on the screw to start - adjust as necessary to have all 4 running properly.

P.S. - to all reading this, that's part of the trouble-shooting section in the manual re: overheating.
Logged
*1973 CB750K3 (Bow)

Offline Gene

  • Chat enuf you too can be a
  • Master
  • *****
  • Posts: 2,041
  • One bike is enuf, change my mind
Re: Certain smell coming from brike
« Reply #8 on: October 12, 2016, 08:08:03 PM »
Quote from: Dos on October 12, 2016, 06:07:05 PM

Also what is a vreg? My regulator? The smell is coming from the top ensnared of the engine

Voltage Regulator.  If it's not regulating properly - keeping the charging to a reasonable level - it can be doing nasty things. 
Logged
*1973 CB750K3 (Bow)

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Certain smell coming from brike
« Reply #9 on: October 12, 2016, 08:45:19 PM »
Maybe your breather hose off the valvecover came off or split right behind where it mounts..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,854
Re: Certain smell coming from brike
« Reply #10 on: October 13, 2016, 03:25:20 AM »
Is this a new build?  All that new paint and stuff is gonna smell funny for a while until all the chemicals burn off and paint fully cures.
Logged
If it works good, it looks good...

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,110
  • Sunny Central Florida
Re: Certain smell coming from brike
« Reply #11 on: October 13, 2016, 04:18:09 AM »
Do you need a shower?  :o

(sorry, I couldn't resist)  ;)


An overly rich condition can eventually lead to carbon fouling of the plugs, pistons, and valves. In extreme cases this can ultimately lead to pre-detonation if IIRC.
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Certain smell coming from brike
« Reply #12 on: October 13, 2016, 06:46:50 AM »
Quote from: Gene on October 12, 2016, 08:04:55 PM
Quote from: Dos on October 12, 2016, 06:07:05 PM
I thought it would be better to run it rich to keep it cool. So I shouldn't? Won't the bike get hotter with the air screw out more?

No - but I get your logic. "If running lean makes it overheat, wouldn't running rich keep it cooler?"

Again, I get it, thought the same thing.  But the science doesn't support it. 1.5 turns out on the screw to start - adjust as necessary to have all 4 running properly.

P.S. - to all reading this, that's part of the trouble-shooting section in the manual re: overheating.
7/8ths turn out on the air screws is stock.   Start from there.
Honda had their best engineers designing these bikes....they set these values in the manual for a reason. 
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,376
  • Central Texas
Re: Certain smell coming from brike
« Reply #13 on: October 13, 2016, 06:50:30 AM »
New Jersey gets hot?  Or, did you take a trip to Death Valley?!
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Dos

  • Expert
  • ****
  • Posts: 826
  • Owner of a cb350f
Re: Certain smell coming from brike
« Reply #14 on: October 13, 2016, 06:59:19 AM »
Alright alright I get it haha.

I'm going to adjust the air screws

Thank you
Logged

Offline Dos

  • Expert
  • ****
  • Posts: 826
  • Owner of a cb350f
Re: Certain smell coming from brike
« Reply #15 on: October 13, 2016, 10:10:26 AM »
I have been running the bike rich for quite a while maybe it's time to set it back to normal I'm a little confused though I've heard different things with the CB350F and the air screw being at 1.5 turns out or 7/8

I have a 4 into pipe so which one is appropriate? Should I listen and see what sounds "good" but then I run the risk of it being lean and melting into alittle piece of tin foil
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Certain smell coming from brike
« Reply #16 on: October 13, 2016, 10:15:51 AM »
7/8 is for a stock bike.  Start there.
You make further adjustments to each individual carb based on A/F mixture readings, or idle plug (chop) color.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Certain smell coming from brike
« Reply #17 on: October 13, 2016, 10:20:37 AM »
Ride your bike to get it hot.
swap in a set of new D8EA plugs, and let it idle, with a fan on the engine, for 4-5 minutes.
Pull the plugs, and check their insulator color.   Compare to the chart below.
Turn your air screws IN for richer, OUT for leaner based on that carbs need.


Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Sigop

  • Hot Shot
  • ***
  • Posts: 332
Re: Certain smell coming from brike
« Reply #18 on: October 13, 2016, 10:45:33 AM »
Great plug chart.
Logged
CB750 K3  Original Owner and Operator

Offline Dos

  • Expert
  • ****
  • Posts: 826
  • Owner of a cb350f
Re: Certain smell coming from brike
« Reply #19 on: October 13, 2016, 11:30:39 AM »
Thank you for that chart my plugs are definitely foiled I'm going to sync the carbs and adjust the air screw soon.

I'll start at 7/8
Logged

Offline TomsK8resto

  • Enthusiast
  • **
  • Posts: 134
Re: Certain smell coming from brike
« Reply #20 on: October 13, 2016, 05:11:30 PM »
Quote from: 754 on October 12, 2016, 08:45:19 PM
Maybe your breather hose off the valvecover came off or split right behind where it mounts..

I had this happen on my '78 750K bike, the garage always smelled like oil, but no leaks.  I cut the hose and put it back on the fitting and put a decent hose clamp on it.  Problem solved.

Tom
Logged
'69 CB750 long gone
'76 CB750F gone
'78 CB750K in progress.....
'09 H-D Roadglide
Pages: [1]   Go Up
« previous next »