« previous next »
Pages: [1]   Go Down

Author Topic: shift lever question..  (Read 1437 times)

0 Members and 1 Guest are viewing this topic.

Offline pddpimp

  • Hot Shot
  • ***
  • Posts: 342
shift lever question..
« on: November 29, 2006, 08:10:10 PM »
Anyone know if the shift lever on the 70's CB750s are the same. I have a problem with my big ol' feet. I'l like to get one that is 1" longer than a stock '77 CB750k has. I could just cut and splice, but I'd rather not.

Thanks..
Logged
When the majority of the United States population get to be 70 years old, they will finally realize what is really important. And by then it'll be too late.


-'77 CB750 Cafe/Muscle bike (early clone)
Soon to have a hopped up 836cc *sold*

-'75 CB750 with a little bit of character

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: shift lever question..
« Reply #1 on: November 29, 2006, 08:47:31 PM »
 Don't know about longer levers but have you tried moving the lever up a notch on the spline shaft? This gives me a bit more room to fit my size 13.
Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline Klark Kent

  • You are in serious trouble if you think I'm an
  • Expert
  • ****
  • Posts: 1,463
  • Our Lady of Blessed Acceleration don't fail me now
Re: shift lever question..
« Reply #2 on: November 29, 2006, 09:11:40 PM »
yeah!
and does anyone know where i can get a cafe seat that can accommodate my enormous balls?
any advice appreciated
-KK
Logged
-KK

75 CB550k
76 Moto Guzzi 850T-3FB LAPD- sold
95 KLR650
www.blindpilotmovie.com

download the shop manual:
http://forums.sohc4.net/index.php?topic=17788.0
you'll feel better.

listen to your spark plugs:
http://www.4secondsflat.com/Spark_plug_reading.html

Offline pddpimp

  • Hot Shot
  • ***
  • Posts: 342
Re: shift lever question..
« Reply #3 on: November 30, 2006, 02:47:27 PM »
Quote from: scondon on November 29, 2006, 08:47:31 PM
Don't know about longer levers but have you tried moving the lever up a notch on the spline shaft? This gives me a bit more room to fit my size 13.

Never even thought about that, I'll give it a try with the size 14s.
Thanks..
Logged
When the majority of the United States population get to be 70 years old, they will finally realize what is really important. And by then it'll be too late.


-'77 CB750 Cafe/Muscle bike (early clone)
Soon to have a hopped up 836cc *sold*

-'75 CB750 with a little bit of character

Offline Jinxracing

  • It's hot shit, not
  • Hot Shot
  • ***
  • Posts: 610
  • '70 CB750 K1
    • The Hairy Nickel
Re: shift lever question..
« Reply #4 on: November 30, 2006, 03:04:58 PM »
Quote from: Klark Kent on November 29, 2006, 09:11:40 PM
yeah!
and does anyone know where i can get a cafe seat that can accommodate my enormous balls?
any advice appreciated
-KK

CR750 seats seem to have a compartment strictly for that purpose:

http://www.cb750cafe.com/bikes.php?cat=1&id=21

Not sure what to call it though..."scrotal satchel" might fit the bill. "Ball-tainer" perhaps? Maybe a "bollocks bowl"?

Seriously...stop me. Seriously.

"Testicle receptacle"?
Logged
"Each of us can find a maggot in our past which will happily devour our futures."

–Captain Horatio Hornblower

www.thehairynickel.com

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: shift lever question..
« Reply #5 on: November 30, 2006, 03:19:59 PM »
When I ride the Harley, I just drag them behind :D
Logged

Offline seaweb11

  • 1st Mate &
  • Really Old Timer ...
  • *******
  • Posts: 6,258
  • Ride & Smile
    • Playground Directory
Re: shift lever question..
« Reply #6 on: November 30, 2006, 09:39:33 PM »
P.S. I don't ride a Harley ::)
Logged
Pages: [1]   Go Up
« previous next »