Author Topic: Super eliminator- A little ink for Bill and Frank (Read 3041 times)

dragracer · « **on:** November 22, 2016, 06:59:22 PM »

Well now, looks like Bill and I got a little press from our record setting passes in super eliminator. Follow the link:

http://www.dragbike.com/super-eliminator-2016-wrap/

Jerry Rxman Griffin aka MuthaF'er · « **Reply #1 on:** November 22, 2016, 08:00:23 PM »

And well done

Deserved ink.

Bill/BentON Racing · « **Reply #2 on:** November 22, 2016, 08:12:52 PM »

K, way to go Frank, Top Ten!

RAFster122s · « **Reply #3 on:** November 22, 2016, 11:01:54 PM »

Congrats Bill and Frank!
David

dragracer · « **Reply #4 on:** November 22, 2016, 11:13:37 PM »

I was a bit surprised to see the top ten finish. I only entered one race this season. I think lowering the record helped along with making rounds down to the semis made up the points.

Bill/BentON Racing · « **Reply #5 on:** November 23, 2016, 10:02:23 AM »

Yep and congratulations to David, took down a heavy hitter in Pro ET or Super Comp, and finished 2nd at Commerce for the year in Pro class....led it most of the year, congrats to you and Jim, Bill

dragracer · « **Reply #6 on:** November 27, 2016, 10:59:24 PM »

Picture of the emailed national record certificate. It's official so now I can say i
lowered my own record.

. Stay tuned for next season. I'm trying something a little different.

SBR-CB400F · « **Reply #7 on:** November 28, 2016, 01:41:38 AM »

Well done guys, congratulations to both of you. I'm jealous lol
CB/SS what does that stand for exactly?

RAFster122s · « **Reply #8 on:** November 28, 2016, 02:12:30 AM »

Congratulations again Frank! Very cool! Should look great on the trophy room wall.
David

Fastbike · « **Reply #9 on:** November 28, 2016, 05:08:26 PM »

Thanks Bill for the shout out. It was Mike Konapacki in ProET on Saturday, 16 time national champion. I stunk in Super Comp, 1st round runnerup! Let a throttle stop fool me instead of running my own race. Hopefully we will all do better next year. Jim and I are planning on 4 out of the 5 ManCup races. Congrats to you and Frank for your records.

Fastbike · « **Reply #10 on:** November 28, 2016, 05:09:40 PM »

Oh, Bill, a little birdie told me you have something new to play with.

dragracer · « **Reply #11 on:** November 28, 2016, 06:47:30 PM »

Quote from: Fastbike on November 28, 2016, 05:09:40 PM

Oh, Bill, a little birdie told me you have something new to play with.

Ahh, so Bill is holding back on his friends?? I suppose that's Nothing new. Lol.

Thanks Dave. I watched you take out the Pack- and it was a thrill. Lol

Glad you guys plan to make most of the races next season. We'll try to hang out more between rounds and grab a bite to eat together afterwards.

Bill/BentON Racing · « **Reply #12 on:** November 28, 2016, 07:21:41 PM »

Well I did find my replacement cases...with this inside! Lol.I'm thinking I build two engines, the MRieck cylinder one, 12.5 JE's but it's going take some time and $. The other one is a sweep the floor bike! But no ltwt pins!

dragracer · « **Reply #13 on:** November 28, 2016, 09:55:40 PM »

Quote from: Bill/BentON Racing on November 28, 2016, 07:21:41 PM

Well I did find my replacement cases...with this inside! Lol.I'm thinking I build two engines, the MRieck cylinder one, 12.5 JE's but it's going take some time and $. The other one is a sweep the floor bike! But no ltwt pins!
[/quote
Quote from: Bill/BentON Racing on November 28, 2016, 07:21:41 PM
Well I did find my replacement cases...with this inside! Lol.I'm thinking I build two engines, the MRieck cylinder one, 12.5 JE's but it's going take some time and $. The other one is a sweep the floor bike! But no ltwt pins!

Live the dream Bill. I'll just have to standby for this one and look from the outside in. My pockets won't allow me to go down that hole with you my friend.

Bill/BentON Racing · « **Reply #14 on:** November 29, 2016, 04:32:16 AM »

Oh no, you don't get off that easy....I got parts for you too! I'm sweeping deep.....lol , anyone recognize the rods?

dragracer · « **Reply #15 on:** November 29, 2016, 02:49:44 PM »

Quote from: Bill/BentON Racing on November 29, 2016, 04:32:16 AM

Oh no, you don't get off that easy....I got parts for you too! I'm sweeping deep.....lol , anyone recognize the rods?

Well thanks for looking out for a fellow racer. I don't have the resources that you have to go any quicker N/A. I am still planning to pursue the high compression, hybrid Honda/Kaw top end/1100 rods. If this works out, I'll once again begin looking at the 900 crank to complete the package. I haven't forgotten the Aussie solution either. Yeah, i know i could have some custom pistons made for the F2 head but i want to see if my theory can be put into play. But, if all else fails.... I do know how to find horsepower in a blue bottle 😁 safely and effectively. Stay tuned, I'm not conceding to you just yet. Lol.

I'm also giving some serious thoughts to setting up a bike to run the 4.60 index class next season so the Honda projects will be a very slow process for 2017.

Bill/BentON Racing · « **Reply #16 on:** November 29, 2016, 05:42:15 PM »

4.60 wow, and I just want a Honda V twin! If I can find a cheap one, I'm going run V twin in 2017 also, look what you've done to me! Lol, Bill

dragracer · « **Reply #17 on:** November 29, 2016, 05:57:08 PM »

Quote from: Bill/BentON Racing on November 29, 2016, 05:42:15 PM

4.60 wow, and I just want a Honda V twin! If I can find a cheap one, I'm going run V twin in 2017 also, look what you've done to me! Lol, Bill

V twin?? Wait a darn minute. I thought we were going to start setting up the stock chassis wheelie bar bike so you could compete in pro ET on an SOHC!!! Don't bail out on me now.

Bill/BentON Racing · « **Reply #18 on:** November 30, 2016, 04:02:07 AM »

LMAO, just a test to see if you were still in! Lol. Pro ET it is!

dragracer · « **Reply #19 on:** November 30, 2016, 07:25:07 AM »

Post another picture of that bike. The only way I saw was on the bed of your truck.

News:

Author Topic: Super eliminator- A little ink for Bill and Frank (Read 3041 times)