Author Topic: Cycle X Drag Bike - Sneak Peak! (Read 56653 times)

Bill/BentON Racing · « **Reply #250 on:** May 31, 2015, 02:41:44 PM »

He didn't run that, it's my goal to start with! Lol, Bill

POPS 911 · « **Reply #251 on:** June 01, 2015, 06:20:42 AM »

FRANK : Maybe a special built converter with a 10,000rpm stall and a line lock you leave off a button...... no slider and a turbo have I seen in 25 years = watching.
A special dump gate that has a timer

?? = have to ask TURBO MAN about this question he is building a HONDAMATIC ? Would be a fun bike to own and ride on the street, but let's no forget the fear the KAWASAKI ZIR factory TURBO gave you when the boost came on and the frame flexed so bad it put you in the next lane over at speed better not be on a two lane road = the ditch or a head on, all bad.

dragracer · « **Reply #252 on:** October 17, 2016, 05:35:55 PM »

This thread hasn't had a post sine June of last year, any updates on the Cycle Ex dragbike project or did our friend Kenny move on to other ventures. I was really looking forward to seeing what was shaping up to be an awesome project.

Anybody out there privy to the current status of this monster??? I think a broken crank was the initial piece that sidelined its debut.

Bill/BentON Racing · « **Reply #253 on:** October 17, 2016, 06:59:26 PM »

I gotta call this week. I'll ask, Bill

dragracer · « **Reply #254 on:** October 17, 2016, 11:03:32 PM »

I need to call about some oversized valves myself. One of my friends promised to handle it for me himself but he left me hanging. He will go unnamed. Lol.

Bill/BentON Racing · « **Reply #255 on:** October 18, 2016, 04:24:50 AM »

I resemble that remark! Lol, I'll check on those also.

, Bill

Big Jay · « **Reply #256 on:** November 01, 2016, 10:46:48 PM »

Bill knows where to get the best valves.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #257 on:** November 02, 2016, 09:12:36 AM »

Jay, will you deliver to Frank at Man Cup?!

Big Jay · « **Reply #258 on:** November 05, 2016, 09:04:35 PM »

Not bringing anything that TSA might take away from me.

Bill, did you get the valves?

Bill/BentON Racing · « **Reply #259 on:** November 06, 2016, 04:06:25 AM »

Yes, thanks, I'll get them out to Frank tomorrow. Thanks again for your help. I also have news on Kenny's race bike! I'll post info when I get back from Caffeine and Octane! Bill

dragracer · « **Reply #260 on:** November 06, 2016, 11:52:35 AM »

Quote from: Bill/BentON Racing on November 06, 2016, 04:06:25 AM

Yes, thanks, I'll get them out to Frank tomorrow. Thanks again for your help. I also have news on Kenny's race bike! I'll post info when I get back from Caffeine and Octane! Bill

Thank Jay and Bill. Need to get some Benton Racing and more APE stickers to put on the new build when it gets done. Shameless plugs for those who help me.

Medyo Bastos · « **Reply #261 on:** November 06, 2016, 02:06:37 PM »

Need to get some Benton Racing and more APE stickers to put on the new build when it gets done. Shameless plugs for those who help me.
[/quote]

Me too, along with a Sam Green racing one too!

Sent from my iPhone using Tapatalk

dragracer · « **Reply #262 on:** November 06, 2016, 03:16:28 PM »

I never had a Sam Green sticker but I've got a Team Sam Green racing shirt.

Bill/BentON Racing · « **Reply #263 on:** November 06, 2016, 04:00:03 PM »

I've been trying to sync these all day! LOL

, Bill

Don R · « **Reply #264 on:** November 06, 2016, 08:15:50 PM »

cbr954 · « **Reply #265 on:** November 07, 2016, 12:29:49 PM »

Where is Kennys race bike news???

Dont keep us hangin lol

Bill/BentON Racing · « **Reply #266 on:** November 07, 2016, 01:11:47 PM »

OK, he's been back at it.....Life kept getting in the way! Anyway it's bigger and better! Has titanium rods now,....$3500.00, etc. He's trying hard to find time, but it's making progress! Bill

madmtnmotors · « **Reply #267 on:** November 07, 2016, 01:22:54 PM »

Titanium rods??!! Holly cow!

Didn't they break a crank? Is it sporting a matching titanium crank?

dragracer · « **Reply #268 on:** November 07, 2016, 02:10:49 PM »

Quote from: Bill/BentON Racing on November 07, 2016, 01:11:47 PM

OK, he's been back at it.....Life kept getting in the way! Anyway it's bigger and better! Has titanium rods now,....$3500.00, etc. He's trying hard to find time, but it's making progress! Bill

That going to be one expensive record breaking motorcycle when he's done. Takes money and good parts to go fast- I found that out myself :-(

kmb69 · « **Reply #269 on:** December 03, 2016, 09:02:26 PM »

Uh oh! This just showed up on the Cycle X Global Headquarters webpage.

http://www.cyclexchange.net/Cycle%20X%20Honda%20Drag%20Bike.htm

What the hell is Kenny up to now?

dragracer · « **Reply #270 on:** December 03, 2016, 11:31:07 PM »

Quote from: kmb69 on December 03, 2016, 09:02:26 PM

Uh oh! This just showed up on the Cycle X Global Headquarters webpage.

http://www.cyclexchange.net/Cycle%20X%20Honda%20Drag%20Bike.htm

What the hell is Kenny up to now?

Looks like another teaser to me. 👀

PeWe · « **Reply #271 on:** December 04, 2016, 01:32:55 AM »

"Top secret" make all of us very curious?

News:

Author Topic: Cycle X Drag Bike - Sneak Peak! (Read 56653 times)