« previous next »
Pages: 1 2 3 [4]   Go Down

Author Topic: Gaskets and seals  (Read 26365 times)

0 Members and 1 Guest are viewing this topic.

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: Gaskets and seals
« Reply #75 on: August 20, 2012, 04:07:41 PM »
Got the O-rings ready to bag and as soon as I get the gaskets in we can start to ship



This is the stock set that Johnnycakes sent (Thanks again)
as you can see, the starter cover gasket is different than the stock one so
this has to go back to the laser cutter and re-do the radius on the corners
The stock one is on the left and the laser cut is on the right



should have everything ready to go in a week or so

thanks for your patience.

Jim French
call me if you have any questions at 770-367-7320
« Last Edit: August 21, 2012, 08:20:21 AM by SamCR750A »
Logged
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Offline LT

  • Full Member
  • *
  • Posts: 1
Re: Gaskets and seals
« Reply #76 on: September 14, 2012, 04:33:53 PM »
Are there any of the gasket and o-ring sets still available?
Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Gaskets and seals
« Reply #77 on: September 20, 2012, 02:02:26 AM »
We are still waiting on the first batch.

Sam.
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline zipper421

  • Full Member
  • *
  • Posts: 3
Re: Gaskets and seals
« Reply #78 on: September 20, 2012, 08:43:13 AM »
could you put me down for a set
thanks
Logged

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: Gaskets and seals
« Reply #79 on: September 24, 2012, 10:44:48 AM »
ok guys
I just got 10 sets of gaskets in this morning and the other 15 sets should be here by mid week
please PM me with your address so I can get your set to you
the price is $70.00 plus shipping
let me know if your going to pay by pay-pal or check..........

thanks
Jim French
770-367-7320
call if you have any questions
Logged
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Gaskets and seals
« Reply #80 on: September 25, 2012, 02:54:32 AM »
Jimmy, I've sent PMs to all parties including the last two (LT and zipper421)

I think Jonnycakes knows (Kate cycle one and Vince08859) can he let them know the sets are ready.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: Gaskets and seals
« Reply #81 on: October 01, 2012, 11:52:19 AM »
I am shipping out 7 sets today (Very busy at my business and just not enough time to get everyone today)
and the rest will be tomorrow

If you haven't sent me an e-mail to jfrench815@gmail.com about a set please do

we can make as many as needed and the O rings also

the sets are $70.00 a set and what ever shipping is going to be

let me know
Jim

770-367-7320
www.jmfmicroweld.com
Logged
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: Gaskets and seals
« Reply #82 on: October 10, 2012, 07:47:44 AM »
If anyone on this list needs some gaskets I need your address to ship to.

Me...........................................................x2
POPS 911................................................X2
Kandrtech................................................X1
JWEEKS...................................................X2
Jonnycakes..............................................X1
Ndstrylgrnrngr.........................................X2
Vince08859 @ Hondachopper.................X1
MRieck.....................................................X1
05c50......................................................X1
tomsweb1...............................................X1
Charliedontsurf.......................................X1
Kate, Cycle One......................................X3 = 18 wanted

Some on this list have there's already shipped
Mike R,s set is going to today

Please call or e-mail me at jfrench815@gmail.com
or call at 770-367-7320

Thanks
Jim
Logged
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Offline Stan-2

  • Full Member
  • *
  • Posts: 4
Re: Gaskets and seals
« Reply #83 on: October 11, 2012, 10:29:46 AM »
Jim, Is the 88x2.2 clutch piston o-ring in this kits?
Thanks, Stan
Logged

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: Gaskets and seals
« Reply #84 on: October 13, 2012, 01:30:40 PM »
Hi Stan
If it wasn't in the original bottom end kit then no
I went back and check all of the O-rings and the closest thing That I have is an 88 by 4

I could probably get this but will have to call and see how many and how much

Jim
Logged
2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Offline shar001

  • Full Member
  • *
  • Posts: 20
Re: Gaskets and seals
« Reply #85 on: April 05, 2013, 09:29:16 PM »
do u guys still have a cb750A gasket kit left, so i can buy or anybody would recommended a good deal online. i'm looking a kit with oil seals. 
Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Gaskets and seals
« Reply #86 on: April 06, 2013, 01:16:33 PM »
Send a PM to Jim F.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline chickenman_26

  • Hot Shot
  • ***
  • Posts: 598
    • Motorcycle Consumer News
Re: Gaskets and seals - countershaft seal
« Reply #87 on: May 01, 2013, 08:35:59 AM »
Logged
MCN DTF

Offline sammon287

  • Full Member
  • *
  • Posts: 70
Re: Gaskets and seals
« Reply #88 on: April 25, 2018, 03:37:05 PM »
  I read through the gasket and seal sticky and it hasn't been updated in five years. I'm starting a rebuild of a '76 750A. Years ago, I made a valve cover gasket and oil pan gasket for it and they held up leak free. I really don't want to try to make a gasket for the left side case/oil pump and other "A" specific gaskets. I need recommendations for the most cost effective way to get the "A" specific gaskets/seals I will need. Would the following two kits cover most of what I need minus the seals? Any ideas on a substitute for the seemingly unavailable counter-shaft seal? There is an NOS/OEM kit on Ebay, but I don't think I want to use forty plus year old gaskets on my project. Any tips are appreciated. This is my first restoration, so this is probably the first of many questions. And before anyone suggests it, I did PM Jim F and am eagerly awaiting his expertise, but thought this thread needs an update.

https://www.gasketking.com/product/honda-cb750a-gaskets-1976-78/
https://www.ebay.com/i/401347819459?chn=ps
« Last Edit: April 25, 2018, 08:29:37 PM by sammon287 »
Logged
1976 CB750A

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,599
  • Gusto mo titi ko?
    • project
Re: Gaskets and seals
« Reply #89 on: April 25, 2018, 05:51:33 PM »
Jim F is the way to go


Sent from my iPhone using Tapatalk
Logged
Pages: 1 2 3 [4]   Go Up
« previous next »