« previous next »
Pages: 1 ... 20 21 [22] 23 24   Go Down

Author Topic: Cb400f "goldie", Handbuilt show, Bikeexif, and dyno run.  (Read 81016 times)

0 Members and 1 Guest are viewing this topic.

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,532
  • SOHC4 member # 2605
Re: Cb400f Breaking in the motor and adding carbon fiber
« Reply #525 on: August 15, 2017, 03:01:03 PM »
Very nice...so do we get to see these new doodads?
Logged
David- back in the desert SW!

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Breaking in the motor and adding carbon fiber
« Reply #526 on: August 16, 2017, 05:18:04 AM »
Quote from: RAF122S on August 15, 2017, 03:01:03 PM
Very nice...so do we get to see these new doodads?
Just got this today.  Once I get the fender I'll get some sheet carbon to make the front number plate.  Once those are on I'll determine the plan for a rear hugger.  Part of me really likes it being open.  But a hugger would be nice to have


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Breaking in the motor and adding carbon fiber
« Reply #527 on: August 16, 2017, 05:18:26 AM »



Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline riverfever

  • Master
  • *****
  • Posts: 1,769
Re: Cb400f Breaking in the motor and adding carbon fiber
« Reply #528 on: August 16, 2017, 08:17:17 AM »
 :o

I'm sprung.
Logged
http://forums.sohc4.net/index.php?topic=127186.0

"You wouldn't think that out here...a man could simply run clear...out of country but oh my...oh my...nothing but the light." -Ben Nichols

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Re: Cb400f Breaking in the motor and adding carbon fiber
« Reply #529 on: August 16, 2017, 08:36:44 AM »
Hot damn.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Need input on rear hugger!
« Reply #530 on: August 19, 2017, 01:25:37 PM »
 Alright got my fender.  I'm going to get some carbon and make a front number plate.  My question is on a rear hugger.  Do I;
1-not run one
2-do carbon fiber
3-polished aluminum

I like it all open but the sensible side of me says I should run one. 


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Need input on rear hugger!
« Reply #531 on: August 19, 2017, 02:06:02 PM »
Kind of leaning towards painting the fender to match, leave the number plate and either go polished aluminum hugger or no hugger


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,905
Re: Cb400f Need input on rear hugger!
« Reply #532 on: August 19, 2017, 02:48:16 PM »
You gotta do something to keep crap of your air filters and the back of the engine...not doing something just send the message that this bike will not really be used, and that's not a good look no matter how clean it is.
Logged
If it works good, it looks good...

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Need input on rear hugger!
« Reply #533 on: August 19, 2017, 02:55:27 PM »
Agreed.  Leaning towards polished hugger and painting the fender


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Re: Cb400f Need input on rear hugger!
« Reply #534 on: August 19, 2017, 04:46:21 PM »
Carbon hugger. Subtle but enough to keep the dirt and water off your motor, carbs, electronics - and it'll look good and match your front.

Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Need input on rear hugger!
« Reply #535 on: August 23, 2017, 04:09:52 AM »

Put a few more miles on the 400.  Going to change the oil this weekend.  Got some aluminum coming and some carbon to see which looks right for the hugger


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Re: Cb400f Need input on rear hugger!
« Reply #536 on: August 23, 2017, 11:44:40 AM »
Nice Yami 2-stroke.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Need input on rear hugger!
« Reply #537 on: September 03, 2017, 06:31:01 AM »
Quote from: SOHC4 Cafe Racer Fan on August 23, 2017, 11:44:40 AM
Nice Yami 2-stroke.
Thank you! 


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Need input on rear hugger!
« Reply #538 on: September 03, 2017, 06:33:25 AM »
Well got a direction for my rear hugger.  Was considering cutting and polished a piece of aluminum and mounting it to the rear frame rails but I didn't like the idea of covering all that area up.  So decided on a carbon fiber hugger mounted to the swinger.  This is just for an idea.  The new ktm 390's have a hugger very similar that should work for me.  Updates coming soon



Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Re: Cb400f Need input on rear hugger!
« Reply #539 on: September 03, 2017, 03:20:34 PM »
+1
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline rickmoore24

  • Be led by your dreams, not pushed by your problems.
  • Hot Shot
  • ***
  • Posts: 746
  • I <3 SOHC4's
    • Rosenbard Films
Re: Cb400f Need input on rear hugger!
« Reply #540 on: September 04, 2017, 10:37:34 AM »
My input is, I like it.  :)
Logged
1972 CB750 K2 (Daily Runner)
1972 CB750 K2 (Sold)
1973 CB750 K3 (Hardtail 836cc)
1998 CBR F3 - R.I.P., went down on the 101 in Calabasas, Ca.
1995 EG6

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Re: Cb400f Need input on rear hugger!
« Reply #541 on: September 04, 2017, 03:32:02 PM »
If you are making the hugger, you might want to mold a flange of mounting onto the swingarm.  For reference, here are some photos of the hugger I used on my sportbike.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Need input on rear hugger!
« Reply #542 on: September 04, 2017, 04:42:28 PM »
Quote from: SOHC4 Cafe Racer Fan on September 04, 2017, 03:32:02 PM
If you are making the hugger, you might want to mold a flange of mounting onto the swingarm.  For reference, here are some photos of the hugger I used on my sportbike.

Ha I have the same hugger on my rc.  Trying a ktm hugger as it should be perfect for it.  If not then I'm going to make it


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Re: Cb400f Need input on rear hugger!
« Reply #543 on: September 04, 2017, 05:03:02 PM »
Quote from: innovativems on September 04, 2017, 04:42:28 PM
Ha I have the same hugger on my rc. 

Too funny!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Alittle Carbon Fiber then time for a photo shoot
« Reply #544 on: September 17, 2017, 08:28:47 AM »
Alright got my hugger mocked up and shipper out to Tannermatic to make it out of carbon for me.  Changing the oil and rechecking rocker clearance.  Also figured out the issue I was having with my speed hut gauge.  The plug wires weren't shielded and were causing interference. 


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Alittle Carbon Fiber then time for a photo shoot
« Reply #545 on: September 17, 2017, 08:29:37 AM »
Also got the news Goldie was one of 21 bikes selected for the Denton independent motorcycle show next month in Texas!


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline Denver_Larry

  • Enthusiast
  • **
  • Posts: 147
Re: Cb400f Alittle Carbon Fiber then time for a photo shoot
« Reply #546 on: September 17, 2017, 08:41:08 AM »
Quote from: innovativems on September 04, 2017, 04:42:28 PM
Quote from: SOHC4 Cafe Racer Fan on September 04, 2017, 03:32:02 PM
If you are making the hugger, you might want to mold a flange of mounting onto the swingarm.  For reference, here are some photos of the hugger I used on my sportbike.

Ha I have the same hugger on my rc.  Trying a ktm hugger as it should be perfect for it.  If not then I'm going to make it


Sent from my iPhone using Tapatalk

Same here!  Great minds think alike I suppose...  are you guys on the RC forum?
Logged
2005 RC51
1973 CB350F...project

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Alittle Carbon Fiber then time for a photo shoot
« Reply #547 on: September 17, 2017, 12:48:55 PM »
Quote from: Denver_Larry on September 17, 2017, 08:41:08 AM
Quote from: innovativems on September 04, 2017, 04:42:28 PM
Quote from: SOHC4 Cafe Racer Fan on September 04, 2017, 03:32:02 PM
If you are making the hugger, you might want to mold a flange of mounting onto the swingarm.  For reference, here are some photos of the hugger I used on my sportbike.

Ha I have the same hugger on my rc.  Trying a ktm hugger as it should be perfect for it.  If not then I'm going to make it


Sent from my iPhone using Tapatalk

Same here!  Great minds think alike I suppose...  are you guys on the RC forum?
Haha.  Yep I'm over.  Not as active since I'm mostly done with my Rc.  This winter I'll wrap it up.  Going to finally paint it and do 20mm online valving to the front end


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Alittle Carbon Fiber then time for a photo shoot
« Reply #548 on: September 17, 2017, 12:49:26 PM »
Quote from: Denver_Larry on September 17, 2017, 08:41:08 AM
Quote from: innovativems on September 04, 2017, 04:42:28 PM
Quote from: SOHC4 Cafe Racer Fan on September 04, 2017, 03:32:02 PM
If you are making the hugger, you might want to mold a flange of mounting onto the swingarm.  For reference, here are some photos of the hugger I used on my sportbike.

Ha I have the same hugger on my rc.  Trying a ktm hugger as it should be perfect for it.  If not then I'm going to make it


Sent from my iPhone using Tapatalk

Same here!  Great minds think alike I suppose...  are you guys on the RC forum?
Haha.  Yep I'm over.  Not as active since I'm mostly done with my Rc.  This winter I'll wrap it up.  Going to finally paint it and do 20mm online valving to the front end


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline innovativems

  • Expert
  • ****
  • Posts: 1,028
    • Innovative MotoSports
Re: Cb400f Alittle Carbon Fiber then time for a photo shoot
« Reply #549 on: September 17, 2017, 01:19:01 PM »
Quote from: Denver_Larry on September 17, 2017, 08:41:08 AM
Quote from: innovativems on September 04, 2017, 04:42:28 PM
Quote from: SOHC4 Cafe Racer Fan on September 04, 2017, 03:32:02 PM
If you are making the hugger, you might want to mold a flange of mounting onto the swingarm.  For reference, here are some photos of the hugger I used on my sportbike.

Ha I have the same hugger on my rc.  Trying a ktm hugger as it should be perfect for it.  If not then I'm going to make it


Sent from my iPhone using Tapatalk

Same here!  Great minds think alike I suppose...  are you guys on the RC forum?
Haha.  Yep I'm over.  Not as active since I'm mostly done with my Rc.  This winter I'll wrap it up.  Going to finally paint it and do 20mm online valving to the front end


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550
Pages: 1 ... 20 21 [22] 23 24   Go Up
« previous next »