Topic: CB750 Automatic kickstart lock nut

[hondamad]

Anyone with a picture or drawing for the lock nut on the kickstart lever?


Sent from my iPad using Tapatalk

[jonnycakes]

Its a bolt with a spring loaded center.

[hondamad]

Thank you , regards


Sent from my iPad using Tapatalk

[kac3177]

my first kick start was missing the bolt. I was able to use a replacement oil drain plug from the hardware store to serve same purpose. I carefully ground a nipple on the end to which is the part that "locks" it in. I can send you pictures I you want me to.     

[jonnycakes]

its also used on early goldwings.  This has the bolt you need

http://www.ebay.com/itm/Honda-GL1000-GL-1000-Goldwing-Gold-Wing-1977-Engine-Kick-Shaft-Kickshaft-Joint-/371408505129?hash=item5679ac0929:g:PjQAAOSwv0tVTWbi&vxp=mtr

or here if you're overseas

http://www.cmsnl.com/honda-cb750a-750-hondamatic-1977-usa_model488/bolt-assy10mm_28248371000/#.WH7Gx7GZNE4

[hondamad]

my first kick start was missing the bolt. I was able to use a replacement oil drain plug from the hardware store to serve same purpose. I carefully ground a nipple on the end to which is the part that "locks" it in. I can send you pictures I you want me to.   

Would appreciate it , thanks


Sent from my iPad using Tapatalk

[kac3177]

The one on the left is the homemade version versus the one on the right that is OEM. Carefully ground, chased the threads after. Works good however I had to add a 13mm wrench to the tool kit. It is a functional, affordable replacement.

[hondamad]

Works for me , thank you


Sent from my iPad using Tapatalk