« previous next »
Pages: [1]   Go Down

Author Topic: 76 CB 550 directionals  (Read 1459 times)

0 Members and 1 Guest are viewing this topic.

Offline Maltieri12

  • Full Member
  • *
  • Posts: 3
76 CB 550 directionals
« on: January 19, 2017, 02:45:39 PM »
I'm new to the forum! I'm working on a 76 cb550 for my first ever cafe racer conversion.  I bought after market directionals that are 2 wire and I hook them up the same way the oem 2 wire directionals were, but the new ones don't flash. When I activate the signal, they light up but then just stay on and don't flash. They're attached the same way as the oem ones. Any suggestions?

Thanks.
Logged

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,418
  • Dr. Bovinestein iBa#80333
Re: 76 CB 550 directionals
« Reply #1 on: January 19, 2017, 03:43:23 PM »
Welcome to the forum.

Double check the wiring diagram.  The proper colored wire with the wrong ground connection will cause that issue, as well the improper color wire with the right ground.  (Happened to me)

You may also have to swap the winker relay to suit the wattage of the new lamps.
Logged

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,128
  • ... but some animals are more equal than others.
Re: 76 CB 550 directionals
« Reply #2 on: January 19, 2017, 11:44:53 PM »
Quote
I'm new to the forum! I'm working on a 76 cb550 for my first ever cafe racer conversion.  I bought after market directionals that are 2 wire and I hook them up the same way the oem 2 wire directionals were, but the new ones don't flash. When I activate the signal, they light up but then just stay on and don't flash. They're attached the same way as the oem ones. Any suggestions
Originally your model had duplo (dual filament) bulbs in front to function both as indicators as well as running lights that were useless btw. I don't know about US bulbs, but here a suitable bulb would be the 21/5 Watts duplolamp that we use as tail/brakelight. So if you're gonna use them as indicators only (wise!) you'll need a simple (single filament) 21 Watts or 18 Watts bulb. Anyway, make sure those running light wires (orange/white (left) and lightblue/white (right)) do not make contact with the bulbs + pole. You haven't picked LED indicators, have you? Check your wiring scheme. Is yours a CB550K or CB550F?
« Last Edit: January 20, 2017, 12:14:07 AM by Deltarider »
Logged
CB500K2-ED Excel black
"There is enough for everyone's need but not enough for anybody's greed."

Offline Maltieri12

  • Full Member
  • *
  • Posts: 3
Re: 76 CB 550 directionals
« Reply #3 on: January 20, 2017, 06:24:39 AM »
Thanks for the response.  The bike is 76 CB550F.  They are not LED, they are incandescent,I believe 12v and 10w.  I wired the rears just the same as the stock lights. (1 power, 1 ground).  I've read some different info talking about relays?  Really new to all this and figuring it out as I go! Thanks for the insight.
Logged

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,128
  • ... but some animals are more equal than others.
Re: 76 CB 550 directionals
« Reply #4 on: January 20, 2017, 06:47:28 AM »
Ten Watts will not be enough. You need 18-23 Watts each to make the winker relay work.
Logged
CB500K2-ED Excel black
"There is enough for everyone's need but not enough for anybody's greed."

Offline Maltieri12

  • Full Member
  • *
  • Posts: 3
Re: 76 CB 550 directionals
« Reply #5 on: January 20, 2017, 12:12:43 PM »
Thanks everyone for the help. An EL-12 2 prong electronic relay solved the problem!
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: 76 CB 550 directionals
« Reply #6 on: January 20, 2017, 01:02:18 PM »
Flashers, but no running lights....right?

Where's Duanob!?!?! ;D  :-X
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: 76 CB 550 directionals
« Reply #7 on: January 20, 2017, 01:19:19 PM »
Hey I'm here. Maltier12 hit me up via PM. I have what you need.

Honda front winkers use a three wire system. You need a special harness with directional diodes to make aftermarket two wire flashers work. I put Triumph Bonnie flashers on my bike because I liked the way they look and had to make something up to make them work properly. I have a few extras I made up.
Logged
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: 76 CB 550 directionals
« Reply #8 on: January 20, 2017, 01:28:42 PM »
Yes.  These are good  8)
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: 76 CB 550 directionals
« Reply #9 on: January 20, 2017, 01:50:42 PM »
Thanks for the kudos Rob!  :D
Logged
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,418
  • Dr. Bovinestein iBa#80333
Re: 76 CB 550 directionals
« Reply #10 on: January 20, 2017, 06:04:42 PM »
Whats this about diodes?  K or F model harness?
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,911
  • Saver of unloved motorcycles.
Re: 76 CB 550 directionals
« Reply #11 on: January 20, 2017, 08:03:24 PM »
 I think he got it working.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,418
  • Dr. Bovinestein iBa#80333
Re: 76 CB 550 directionals
« Reply #12 on: January 21, 2017, 09:37:39 AM »
Quote from: Don R on January 20, 2017, 08:03:24 PM
I think he got it working.

Haha yup

Quote from: Maltieri12 on January 20, 2017, 12:12:43 PM
Thanks everyone for the help. An EL-12 2 prong electronic relay solved the problem!
Logged
Pages: [1]   Go Up
« previous next »