« previous next »
Pages: [1]   Go Down

Author Topic: Points hardware  (Read 553 times)

0 Members and 1 Guest are viewing this topic.

Offline emlupi

  • Hot Shot
  • ***
  • Posts: 540
Points hardware
« on: January 24, 2017, 05:21:15 PM »
Good evening folks,

Does anyone know what size the tiny hex bolt and nut are that attach the coil leads to the breaker points? Need to get some tools for replacing these. Thanks.
Logged

Offline emlupi

  • Hot Shot
  • ***
  • Posts: 540
Re: Points hardware
« Reply #1 on: January 24, 2017, 05:39:25 PM »
Just found out that I had a socket to fit these hiding in my workbench drawer. Turns out to be 5.5mm. Kinda odd size, no?
Logged

Offline Pan1cReaper

  • Enthusiast
  • **
  • Posts: 112
Re: Points hardware
« Reply #2 on: January 24, 2017, 06:23:02 PM »
Yes and no. 5.5 MM seems to always be included in a decent metric 1/4" socket set or metric mini wrench set. Not sure the significance, but I am sure the internet knows.
Logged

Offline whitjonw

  • Enthusiast
  • **
  • Posts: 201
  • Motorcycle Maniac
Re: Points hardware
« Reply #3 on: January 24, 2017, 07:26:15 PM »
I have found that a six point 5.5mm socket will also turn the hexagonal type latches on early aftermarket gas caps. So yes, they definitely have a purpose !
Logged
1973 Honda CB500 K2
1974 Honda CL200 Scrambler
1974 Honda CB750 K4
1976 Honda CB750 K6

This is our life, this is our song.....
Pages: [1]   Go Up
« previous next »