Author Topic: Braking Drills  (Read 1584 times)

0 Members and 2 Guests are viewing this topic.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Braking Drills
« on: January 31, 2017, 11:38:59 AM »
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: Braking Drills
« Reply #1 on: January 31, 2017, 02:46:13 PM »
My neighbor for several years was a Seattle PD MC cop.  At the time we lived in a pretty rural area. 
Each month he set up markers on our street and went thru drills on his H-D work bike to stay sharp.
Mostly a lot of the slow speed short radius counterbalance type turning.  clutch/throttle skills.
I had my 350F at the time....quite a bit more nimble thru his course ;D

Practice is a good thing.
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Re: Braking Drills
« Reply #2 on: January 31, 2017, 03:07:09 PM »
Most MC have serious riding skills.  If you search youtube you will find plenty of videos of cops riding tight, technical timed courses with heavy patrol bikes -- requiring some awesome balance, braking, and clutch skills.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,437
  • Dr. Bovinestein iBa#80333
Re: Braking Drills
« Reply #3 on: January 31, 2017, 04:29:59 PM »
Riding like a cop is a good way to understand lane positions too.

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,245
  • I love to restore & travel. Keep'em Going Strong !
Re: Braking Drills
« Reply #4 on: January 31, 2017, 04:40:29 PM »
I like that article on braking especially where they're saying basically to 'read the terrain'.I like to get a feel for the surface of the road i'm riding on to know how much I can lean/brake.
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,884
    • http://forums.sohc4.net/index.php?PHPSESSID=acc1r29k78fghqgi7m62mf86o2&/topic,60973.0.html
Re: Braking Drills
« Reply #5 on: February 13, 2017, 09:23:36 AM »
i alvays take some power braking teste on the cbx..specily at the spring..im a bit rusty..and need to re learn the brake distange(vho is realy long on this heavy bike),,,and it is doubel as powerfull as my 550..just speed ahead can give some problems...the 550 is so balanced both acc and stopp are relative easy..and only autcoming faktors can brake up the smooth ride...
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,817
  • Northern Virginia
Re: Braking Drills
« Reply #6 on: February 13, 2017, 09:38:06 AM »
Buddy of mine was out of commission for 3 month - he is a motorcycle cop and went down practicing.   Broke left collar bone.
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,217
  • Saver of unloved motorcycles.
Re: Braking Drills
« Reply #7 on: February 14, 2017, 03:28:46 PM »
 I was going 80 on my 79 wing and realized I was on the wrong side of the barricades for an oncoming construction zone, After checking, there were no cars around so I did a practice emergency stop. I was quite impressed with the result although the new pads were a little stinky.
 I regularly practice slower mph stops. My 70 750 is getting new pads, it stops lousy.
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Re: Braking Drills
« Reply #8 on: February 14, 2017, 04:06:14 PM »
I was going 80 on my 79 wing and realized I was on the wrong side of the barricades for an oncoming construction zone, After checking, there were no cars around so I did a practice emergency stop. I was quite impressed with the result although the new pads were a little stinky.

Unlike JWilde's claims, you were likely not in 2nd gear doing 80+ mph.  ;)
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,449
Re: Braking Drills
« Reply #9 on: February 15, 2017, 04:20:46 AM »
There are good vids of cops doing those drills, fun to watch. Mostly slow speed work but often avoiding an obstacle on the street is at a slower speed.

Braking opinion & #$%*s...everbody has.... well we all know the saying!  ;D

Having this discussion is great, we all learn by it. When I see a custom bike with chrome rotors it'll be a guarantee the rider will say front brakes are dangerous. Find the middle ground.

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,245
  • I love to restore & travel. Keep'em Going Strong !
Re: Braking Drills
« Reply #10 on: February 15, 2017, 05:40:15 AM »
There are good vids of cops doing those drills, fun to watch. Mostly slow speed work but often avoiding an obstacle on the street is at a slower speed.

Braking opinion & #$%*s...everbody has.... well we all know the saying!  ;D

Having this discussion is great, we all learn by it. When I see a custom bike with chrome rotors it'll be a guarantee the rider will say front brakes are dangerous. Find the middle ground.

This is the first time I heard of it;folks Really chrome plate brake rotors? sick  :o  ::)
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,437
  • Dr. Bovinestein iBa#80333
Re: Braking Drills
« Reply #11 on: February 16, 2017, 08:43:11 AM »
There were so many custom bikes with no front brake at all  :o

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,552
  • SOHC/4 Member #1235
Re: Braking Drills
« Reply #12 on: February 16, 2017, 03:01:42 PM »
With flat track bikes, that would be the limited case where it is true.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,817
  • Northern Virginia
Re: Braking Drills
« Reply #13 on: February 17, 2017, 04:21:59 AM »
King Custom Cycles builds them, or used to.
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,884
    • http://forums.sohc4.net/index.php?PHPSESSID=acc1r29k78fghqgi7m62mf86o2&/topic,60973.0.html
Re: Braking Drills
« Reply #14 on: February 17, 2017, 06:56:37 AM »
uh yes... king kostom..long since ve last heard from him..the greatest before fender and him?.. w-ilde or somthing like that..
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: Braking Drills
« Reply #15 on: February 17, 2017, 07:07:20 AM »
King Custom Cycles builds them, or used to.
I remember that guy.  Cool chops.  Interesting fellow.
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,365
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Braking Drills
« Reply #16 on: February 17, 2017, 07:22:16 AM »
When I took the MSF course they did braking exercises. They also did sharp turn exercises. People tend to rely on their brakes since they are so good today. They sometimes run straight into things that could be steered around. With my 78K "speed reducers" it is a good lesson.
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,449
Re: Braking Drills
« Reply #17 on: February 17, 2017, 01:37:14 PM »
Speed reducers.  ;D We sure don't want to spoil our forward motion.