Author Topic: Manufacturers Cup 2017  (Read 21931 times)

0 Members and 1 Guest are viewing this topic.

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #50 on: April 14, 2017, 07:04:17 PM »
I didn't get a chance to stop by his trailer to search for Kaw parts this time. Hopefully he'll bring the parts to Memphis.

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,591
  • Gusto mo titi ko?
    • project
Re: Manufacturers Cup 2017
« Reply #51 on: April 15, 2017, 08:35:11 AM »
Medyo,  we ate at Interstate BBQ. Bill


'k we'll go somewhere better this time  ;D 

Offline POPS 911

  • Expert
  • ****
  • Posts: 926
Re: Manufacturers Cup 2017
« Reply #52 on: April 19, 2017, 05:02:17 AM »
I would think the DA at Memphis could be better than Valdosta for a record SEL passes , but year before last my weather station at Valdosta read -235 feet one morning = the only time I seen a better reading than that was Englishtown -355 feet years back and that was when I found out what the EAST COAST motorcycle drag races called racing in the tunnel with minus DA for low numbers in 1320'.

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #53 on: April 19, 2017, 07:49:41 PM »
I would think the DA at Memphis could be better than Valdosta for a record SEL passes , but year before last my weather station at Valdosta read -235 feet one morning = the only time I seen a better reading than that was Englishtown -355 feet years back and that was when I found out what the EAST COAST motorcycle drag races called racing in the tunnel with minus DA for low numbers in 1320'.

Pops, the weather should be good this time of year. That heat the last few seasons took a toll on bike and rider. Unfortunately for me, if I get the nitrous SOHC bike ready to go after that CB/SN record, I won't be able to enter my red bike in S/E for the CB/SS record. I'll try to bring both bikes  and just run the red bike in street ET. Bill, this is your opportunity to shine without competition bud. I know you'll put on a great show and topple the current ET record.

Any chance we'll get to see you in Memphis??

Offline POPS 911

  • Expert
  • ****
  • Posts: 926
Re: Manufacturers Cup 2017
« Reply #54 on: April 20, 2017, 06:48:57 AM »
SEL Frank : I might make a run to ROCKINGHAM , been 20 years since we had a IDBA race at STEVE'S place, poor Schnitz had a bad travel run to that place = came out of the tunnel on I-77 S. and the wind took his new big trailer right off the back of his dually ........... bent and broke every thing on the trailer = another run South the whole trailer hitch on his dually broke off and the trailer ran into the back of the truck. After those two near fatal accidents I would always ask DAVE telling me how the trip from Indiana went at our next events. Found out what the name " YOU A YANKEE " meant while driving my van with OHIO license plates thru the South to those IDBA events in the ol dayz. Hey I love GRITS w/ butter and sugar it's the mortar that seals the cracks in your insides.

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #55 on: April 20, 2017, 02:36:12 PM »
Pops, no self respecting southerner puts sugar in their grits. Must be you Yankee's thinking its cream of wheat or something. Lol. At least you've tried grits. It will stick to your ribs and is a good way to start a cold day. Mix in a little cheese and you're "eatin high on the hog".

Okay, we'll look forward to seeing you at the ROCK. I'll give you a call sometime soon.


Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,488
Re: Manufacturers Cup 2017
« Reply #56 on: April 20, 2017, 05:21:46 PM »
Pops, no self respecting southerner puts sugar in their grits. Must be you Yankee's thinking its cream of wheat or something. Lol. At least you've tried grits. It will stick to your ribs and is a good way to start a cold day. Mix in a little cheese and you're "eatin high on the hog".

Okay, we'll look forward to seeing you at the ROCK. I'll give you a call sometime soon.
Damn right frank

Sent from my R1 HD using Tapatalk

mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Manufacturers Cup 2017
« Reply #57 on: May 19, 2017, 01:00:02 PM »
Head count for Memphis? Who's planning to make it?

Talked to a couple of the BIG GUYS, from the North and the East, this week that are definite "maybes"!  ;)

Extra incentive: Memphis' best BBQ on Angelo!!!  ;D  ;D  ;D

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #58 on: May 19, 2017, 08:04:51 PM »
I'm a small fry but we're planning to be there. Can we expect to see a Texas license plate on the property??

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Manufacturers Cup 2017
« Reply #59 on: May 19, 2017, 08:49:03 PM »
I'm a small fry but we're planning to be there. Can we expect to see a Texas license plate on the property??

Not sure what plate will be on the rental from the airport, but I am gonna be there.  ;)

OK, OK, maybe I went a little long on the Angelo thing, but he did promise to show us the way!  8)

You ARE one of the BIG GUYS Frank. In fact, "King of the Hill" ........... for now.  8)

The 2 I was referring to may be more bark than bite!  ;D  ;D  ;D

Any more?  ???
« Last Edit: May 20, 2017, 10:20:41 AM by kmb69 »

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,923
  • Bought her new 4/75
Re: Manufacturers Cup 2017
« Reply #60 on: May 20, 2017, 09:54:14 AM »
Not likely for me. My schedule is up in the air right now. However November is on.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,591
  • Gusto mo titi ko?
    • project
Re: Manufacturers Cup 2017
« Reply #61 on: May 20, 2017, 01:42:26 PM »
Who's making it??? Can we get a list going?


Sent from my iPhone using Tapatalk

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #62 on: May 20, 2017, 03:47:03 PM »
I'm just coming for the BBQ.

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Manufacturers Cup 2017
« Reply #63 on: May 20, 2017, 06:47:23 PM »
I'm coming for heat and sunshine, lol. Ain't released to ride yet...., we'll see.
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Manufacturers Cup 2017
« Reply #64 on: May 20, 2017, 09:32:43 PM »
Ya'll get on the phone Monday morning, to Kenny and Mikey, to get their butts to Memphis, for a weekend of BBQ, BS, and supporting Frankie and Wilbur. Oops, sorry Wilbur!
« Last Edit: May 21, 2017, 08:51:38 AM by kmb69 »

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #65 on: May 20, 2017, 09:44:17 PM »
I'm coming for heat and sunshine, lol. Ain't released to ride yet...., we'll see.

Dang man, don't leave me hangin. I can't do it alone, but I'll try my best not to embarrass you guys. I'm hoping you'll get a good report this week Billy. I know I can count on Wilbur. He's gotten the fever so he'll probably show up as well.

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Manufacturers Cup 2017
« Reply #66 on: May 21, 2017, 07:05:52 AM »
Well, well, yall can support Frankie and the soon to be CB/SS new record holder can't you? LMAO, I feel the love, lol! Anyone got pics or a link for pics and info on Frank's 754 frame kit? Time to install mine.Thanks, Tuesday makes a month, time to get wrenching also, past time, we going to try.....BabyFace hold this wrench please!
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Manufacturers Cup 2017
« Reply #67 on: May 21, 2017, 08:54:11 AM »
Pm sent, there is a pic up. Re the kit in 4 sale. 754
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Manufacturers Cup 2017
« Reply #68 on: May 21, 2017, 08:54:59 AM »
Well, well, yall can support Frankie and the soon to be CB/SS new record holder can't you? LMAO, I feel the love, lol! Anyone got pics or a link for pics and info on Frank's 754 frame kit? Time to install mine.Thanks, Tuesday makes a month, time to get wrenching also, past time, we going to try.....BabyFace hold this wrench please!

Oops, you too Billy! Was just guessing you would not be released till after the 8th.  ;)


Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #69 on: May 23, 2017, 04:54:30 PM »
Well, well, yall can support Frankie and the soon to be CB/SS new record holder can't you? LMAO, I feel the love, lol! Anyone got pics or a link for pics and info on Frank's 754 frame kit? Time to install mine.Thanks, Tuesday makes a month, time to get wrenching also, past time, we going to try.....BabyFace hold this wrench please!


You good to go now Bill??

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,923
  • Bought her new 4/75
Re: Manufacturers Cup 2017
« Reply #70 on: May 23, 2017, 09:13:41 PM »
He ain't dead is he?!  ;)  My money is on Bill  ;D
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #71 on: May 24, 2017, 07:36:32 AM »
He ain't dead is he?!  ;)  My money is on Bill  ;D

Right Jerry. Never count the Bling Master out. He's been face down on the mat and came back for a TKO.

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Manufacturers Cup 2017
« Reply #72 on: May 24, 2017, 05:23:32 PM »
Lol, been so bummed about my hand and now Nicky Hayden.
But I climbed on the Iron Horse tonight! Look, I can pull it in, therapy again today, twice a week trying to get ready! Got a lot to do in one weeks time if I get release tomorrow! Got to rebuild front brake caliper and master cylinder.  Also check fuel delivery, perhaps play with z bump stick! Fix shift light and install frame kit, wonder what I'll do after lunch? LMAO.  Stay tuned and thanks for the kind words, hope I can live up to your expectations,  Bill
« Last Edit: May 24, 2017, 05:26:56 PM by Bill/BentON Racing »
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,923
  • Bought her new 4/75
Re: Manufacturers Cup 2017
« Reply #73 on: May 24, 2017, 06:50:15 PM »
Bill, THAT my friend is the ONLY therapy you need. Squeeze, release, squeeze, release. 10 sets of 10 every couple hours. Remember, pain can be good  ;) Blood isn't.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #74 on: May 25, 2017, 12:30:02 PM »
Forgot I bought a few pictures at the Cup race. Not certain which class I was running at the time.